Bucket Glide - Left Side
$40.87
Special Order
PartSelect Number
PS2323481
Manufacturer Part Number
WR72X10247
Manufactured by
GE
Product Description
Bucket Glide - Left Side Specifications
This is the bucket glide or bucket slide rail for your refrigerator ice maker. It connects to the wall of your freezer and allows the ice bucket to slide in and out. Your refrigerator will have a left-side and a right-side bucket glide, but this part is for the left side only. It is made of white plastic, and is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Ice maker not making ice
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint.
Part# WR72X10247 replaces these:
AP4345457, 1478178
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 17 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Glide broken and wouldn't hold ice bucket motor in place.
Removed the 3 screws using a socket set. Removed 1 screw with the broken plastic piece off of the ice bucket motor by holding the broken plastic with pliers and removed screw. Be aware that the glide rail screws are standard socket size while the ice bucket motor screw was slightly larger (don't remember the exact measurements). Attached new Bucket Glide. Fixed.
Other Parts Used:
-
Ryan from Deltona, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Socket set
38 of 44 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stripped out helix lock, broken bucket glide rails
PITA to take apart, finally had to use two screwdrivers to pry up on the mechanism that turns the auger in order to gain access. Once I figured that out, the rest of the repair was a breeze.
Other Parts Used:
-
Roger from Peoria, AZ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
9 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Glide Bucket LH was broken
When I arrived from work, the job was already done and it was installed by my 18 year old son in 15 minutes without my supervision.
Other Parts Used:
-
john from Peoria, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
7 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice machine quit working. Motor fell out!
1-Remove the ice bucket. 2-Nut driver 1/4 inch to remove three screws in bracket. 3-8mm nut driver to remove one screw in motor mount (where broken). Install new part. Reverse order to complete repair.
Other Parts Used:
-
Jared from TAYLORSVILLE, MS
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the left hand glide broke and could not support the ice bucket
I think there were 3 philip screws to remove, take off the existing glide and replace with the new part. A very simple repair and saved about 175.00 if called in a professional, Thanks Part Select
Other Parts Used:
-
Neal from Haverhill, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
torque from ice auger broke bucket glide bracket
Removed four screws from broken glide bracket and auger bracket and remove. Replaced with new glide bracket and reinserted ice bucket to connect auger with auger motor. Two socket size job.
Other Parts Used:
-
Donald from Henderson, NV
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left side bucket guide cracked away from the auger attachment. Could not dispense ice cubes.
Amazingly simple. I followed the directions I found on your site 4 socket screws removed. They were easily accessible. Replaced the broken bucket guide with the new part. Put the screws back in in less than 15 minutes the icemaker auger feature that dispenses the ice was back in working order.
Other Parts Used:
-
Michael from CHATSWORTH, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left glide that ice bucket slides on broke in the rear where the ice motor connects on
I had previously removed the motor by unplugging 2 plugs and had the motor sitting on my kitchen counter awaiting for the part from the site. On receipt of the part, we removed the broken left glide, installed the new glide, re plugged the motor and attached it to the new glide. If it weren't for my hubby trying to find the right socket tool for the screws, installation would have been less than 15 minutes. The screw that attaches the glide to the ice motor is a different size than the ones that screw into the side of the fridge.
Other Parts Used:
-
Bridgette from MIAMI, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Bucket Glide
Requires a 1/4 inch socket to remove three screws holding the glide in place and a 5/16 inch socket which attaches the drive motor to the bucket glide in the back. I described this as "really easy" rather than "very" because starting the 5/16 inch screw holding the drive motor is in a bit of tight spot.
Other Parts Used:
-
Lee from RENO, NV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bucket guide - Left Side broke that holds tray motor
Centered bucket guide plastic hook (notch) on back to line up screw hole of tray motor. Used socket to screw together. Without the bucket guide plastic hook this was all but impossible to line up the screw hole. When I discovered the plastic hook or notch, the process was easy!
You can't see behind the motor housing to see what you are trying to do!
Using the plastic notch was essential.
The fix is still working with no problems.
You can't see behind the motor housing to see what you are trying to do!
Using the plastic notch was essential.
The fix is still working with no problems.
Other Parts Used:
-
Richard from JACKSON, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sergio
April 15, 2018
How are you determing the right and left side of the appliance ?
For model number CSHS5UGXCSS
Hello Sergio, thank you for your question. You determine the right and left sides of the appliance as you're standing in front of the unit, looking at it. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Meredith
July 11, 2019
The hole where the ice tray bolts into the left side of the ice maker glider broke. I cannot figure out what piece to purchase. I have a picture of that will help but it won’t let me attach here.
For model number PSS26MSWCSS
Hello Meredith, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2323481. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2323481
Manufacturer Part Number: WR72X10247
Manufacturer Part Number: WR72X10247
Brand
Model Number
Description