Product Description
Selector Knob Specifications
This knob can be used with a washer or dryer and fits on a D-shaped shaft. It is sold individually.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dryer Selector Knob
Troubleshooting
This part fixes the following symptoms:
Touchpad does not respond | Will Not Start
This part works with the following products:
Dryer, Washer.
This part works with the following products:
Frigidaire, Westinghouse, Electrolux.
Part# 134844410 replaces these:
AP4339026, 1460965, 134844410, 134034900, 134034910, 134034913
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Marcelle J - June 19, 2021
Verified Purchase
Exactly what I needed.
easy to locate the part based on the model number on my machines. Easy to install. An exact match to the ones I already have. Exactly what I needed. Happy with purchase. Shipping was fairly quick as well.
Terry F - April 3, 2020
Verified Purchase
Dryer Selector Knob
OK. It is a bit pricey
Stacy W - November 5, 2019
Verified Purchase
Top notch
Easy peasy lemon squeazy
Michael B - July 13, 2019
Verified Purchase
Easy .... just push on & done!
Don't know why I waited using pliers for 6 months. Arrived at the door in 2 days!
Claire C - May 14, 2019
Verified Purchase
Ordering part for my dryer
Very fast delivery. Web site esy to use.
Funmilola O - March 29, 2019
Verified Purchase
Easy to install
The shipment was fast. Received product in good condition, perfect for my dryer.
Mark M - March 12, 2019
Verified Purchase
It' s a knob
Yup, the part is exactly what it said it was and it fit on to what it was supposed to.
JING C - August 30, 2018
Verified Purchase
wrong part you mailed
I need another part but you give me wrong part .I payed for the part and shipping but when I got it ,it is useless for me .I want return it, the post office will charge me over $17. So I am not happy for this purchase.
Nataly R - July 31, 2018
Verified Purchase
Easy Repair
The part was in great condition. It's just a knob that I popped on to turn my dryer on. Thanks for the rapid delivery. Service was good.
Stephen O - July 29, 2018
Verified Purchase
Wrong serial number
There are two serial numbers. Read them VERY closely. Or else you'll end up with the wrong part. Total waste of money
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 59 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer squealed like a pig and at times the drum stopped rotating
First thought the problem was a stretched drum belt or bad idler pulley. Ordered a new belt and idler assy plus spring. Replaced those items with relative ease following suggestions obtained at this site.However, problem persisted and I now suspected a bad drum bearing. Odered the bearing kit and replaced same using the following procedure.
1. Removed the cover from the back of the dryer (held in place via two phillip head screws)
2. Pushed down on the idler assy and removed the idler spring to release the drum belt.
3. Inserted flat tip screwdriver between the top panel and the dryer main body in the front of the dryer to pry the top loose from the two retaining clips.
4. used phillips screwdriver to remove the two retaining screws (one left, one right) that hold the front panel to the main body of the dryer. (about a foot down from the top of the dryer).
5. disconnected the wiring plug on the top right hand side at the top of the dryer.
6. lifted the front panel slightly removing it from the main body and placed it to the side.
7. lifted the rear of the drum to release it from the bearing bracket and removed the drum belt.
8. Pulled the drum through the front of the dryer body and moved it to an open work area.
9. Reached into the Dryer and loosened the two
bearing bracket screws with a nut driver. Here's where another pair of hands would have come in handy. Holding the ground bar on the back of the drum with on hand, reached into the dryer and finished removing the bracket screws somehow managing not to drop the tiny grounding ball (size of a BB) Removed the badly damaged plastic bracket, grounding bar, and grounding ball and set
them aside to be discarded later.
10. Used impact driver with phillips attachment to remove two of the three screws that hold the bearing to the back of the drum (these are on the inside) The third screw's head stripped out and I had a very difficult time removing it. Had it not been for that, the job would have taken less than an hour.
11. I had my wife hold the bearing in place while I started the three retaining screws.
12. My wife also got behing the dryer and held the grounding bar in place while I installed the new bearing bracket . (this kept me from loosing the grounding ball)
I just reversed the rest of the procedures to install the drum belt, drum, front panel, etc.
The dryer works like new now, doesn't squeal.
Also replaced the on/off switch knob (just pulled the old one from the stem and slid the new one on.
1. Removed the cover from the back of the dryer (held in place via two phillip head screws)
2. Pushed down on the idler assy and removed the idler spring to release the drum belt.
3. Inserted flat tip screwdriver between the top panel and the dryer main body in the front of the dryer to pry the top loose from the two retaining clips.
4. used phillips screwdriver to remove the two retaining screws (one left, one right) that hold the front panel to the main body of the dryer. (about a foot down from the top of the dryer).
5. disconnected the wiring plug on the top right hand side at the top of the dryer.
6. lifted the front panel slightly removing it from the main body and placed it to the side.
7. lifted the rear of the drum to release it from the bearing bracket and removed the drum belt.
8. Pulled the drum through the front of the dryer body and moved it to an open work area.
9. Reached into the Dryer and loosened the two
bearing bracket screws with a nut driver. Here's where another pair of hands would have come in handy. Holding the ground bar on the back of the drum with on hand, reached into the dryer and finished removing the bracket screws somehow managing not to drop the tiny grounding ball (size of a BB) Removed the badly damaged plastic bracket, grounding bar, and grounding ball and set
them aside to be discarded later.
10. Used impact driver with phillips attachment to remove two of the three screws that hold the bearing to the back of the drum (these are on the inside) The third screw's head stripped out and I had a very difficult time removing it. Had it not been for that, the job would have taken less than an hour.
11. I had my wife hold the bearing in place while I started the three retaining screws.
12. My wife also got behing the dryer and held the grounding bar in place while I installed the new bearing bracket . (this kept me from loosing the grounding ball)
I just reversed the rest of the procedures to install the drum belt, drum, front panel, etc.
The dryer works like new now, doesn't squeal.
Also replaced the on/off switch knob (just pulled the old one from the stem and slid the new one on.
Other Parts Used:
-
charles from new holland, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Socket set
690 of 707 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob replacement
Just slipped them on and ready to go. Ordered them on thur and got em on Tues.
Other Parts Used:
-
Kevin from Donalsonville, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
381 of 390 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer start switch shaft was broken by using pliers after knob was lost
I first disconnected the power by unplugging power cord.
I then removed back cover from control panel using philips screwdriver.
I removed the start switch by twisting it counter clockwise.
I removed the two push on connectors from the start switch.
I installed the two connectors on the new switch.
I twisted the new switch into place, and installed the new knob.
I reinstalled the back cover plate.
I inserted the power cord back into the receptacle.
I twisted the start knob clockwise.
VOILA!!!!!
I then removed back cover from control panel using philips screwdriver.
I removed the start switch by twisting it counter clockwise.
I removed the two push on connectors from the start switch.
I installed the two connectors on the new switch.
I twisted the new switch into place, and installed the new knob.
I reinstalled the back cover plate.
I inserted the power cord back into the receptacle.
I twisted the start knob clockwise.
VOILA!!!!!
Other Parts Used:
-
ERNEST from SPRINGFIELD, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
206 of 285 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knobs & Handle Broken
Did repairs by hand, took longer to open box and remove packaging that to install the parts. Total time from mail box to repair complete- 3 Minutes.
Other Parts Used:
-
Kevin from Cedar Rapids, IA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
82 of 146 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The most-used control knob on the face of the dryer wore out.
After entering the info on the dryer into the PartSelect site, it brought up a list of parts, and a diagram showing where all parts go on the dryer.
Clicking on the knob description brought up a photo which proved beyond a shadow of doubt that this was the correct part. At a cost of $5, who wouldn't pay for the expedited freight also? For 6 months we've kept the pliars on top of the dryer to use in place of the worn out knob. Don't lose the address to this site. Jim
Clicking on the knob description brought up a photo which proved beyond a shadow of doubt that this was the correct part. At a cost of $5, who wouldn't pay for the expedited freight also? For 6 months we've kept the pliars on top of the dryer to use in place of the worn out knob. Don't lose the address to this site. Jim
Other Parts Used:
-
Jim from San Diego, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
79 of 141 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixed broken knobs and switch
First, I unplugged the dryer. Then, I removed the back panel from the controls section (6 screws), disconnected the old switch and reconnected the new switch. Positioning the switch in the control panel took some figuring out, but once I realized that the switch slots into place, and then gets locked in by turning 1/8 of a turn, it worked fine.
Replacing the knobs was a cinch, just popped them in place. Now the controls are like new again.
Frigidaire controls are really junk, though. I won't be surprised if I have to do this repair again in two years.
Replacing the knobs was a cinch, just popped them in place. Now the controls are like new again.
Frigidaire controls are really junk, though. I won't be surprised if I have to do this repair again in two years.
Other Parts Used:
-
Scott from Dorchester, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
78 of 141 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stripped knob
Once the part was located all I needed to do was pop the old part off and pop the new part on. It took less than a minute from start to finish. It also saved me an $80 service call.
Other Parts Used:
-
Celeste from Forney, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
76 of 138 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken knob
Just put the new one on! Absolutely great service!!!!
A+++++++++++++++++++++++++++++++++++++
A+++++++++++++++++++++++++++++++++++++
Other Parts Used:
-
Andrew from Cambridge, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
39 of 1228 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
On / off switch broke
1st. unplug dryer
2nd. remove housing / 4 allen head screws
3rd. remove wiring clips from switch
4th. remove switch / install new
5th. install wiring clips
6th. test dryer
7th put housing back on
2nd. remove housing / 4 allen head screws
3rd. remove wiring clips from switch
4th. remove switch / install new
5th. install wiring clips
6th. test dryer
7th put housing back on
Other Parts Used:
-
Bill from Mentor, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
22 of 593 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had 3 knobs break on my washer and had been using pliers to turn them. This is not the first time I've had broken knobs either. I think I must either be a Hercules or they are poorly made!
-
Mary from Georgetown, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
22 of 593 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
I Need The Virginia
January 18, 2018
In the video you are replacing the middle knob. Are the 3 knobs all the same? I need the one that starts the dryer- the one on the right.
For model number GLER341ASI
Hello Virginia, Thank you for your inquiry. All 3 knobs are the same for this model. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Kathy
January 7, 2018
Is the selector knob the same as the on knob?
For model number GLER331AS2
Hi Kathy, Thank you for the question. The Selector Knob, Part Number: PS2330885 are the two smaller knobs tot he left of the panel. The Timer Knob, Part Number: PS2330897 is the main knob on the right. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Tim
October 6, 2017
Dryer runs but no heat.Replaced the element still no heat but noticed the selection knob was not advancing. Could this be my problem?
For model number LER7648KQ
Hi Tim,
Thank you for your question .Yes, it could be. However I would suggest checking your thermal fuse, all of your thermostats, and your door switch as well first. In that order. Those are usually the parts that cause this sort of problem. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Gene
October 8, 2017
Is this a set of knobs or just an individual knob?
For model number GLGR642AS5
Hi Gene,
Thank you for your question. This would be just for one knob. They are sold individually. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Katie
December 5, 2018
Our knob broke off, and the spot it was at is now flat with the dryer, and we are unable to turn it on. Would a new knob replacement be what we need?
For model number Ferb5700ds0
Hello Katie, Thank you for the question. You will need to replace the switch that the knob fits onto. Please feel free to submit a new question with what the knob controlled or what switch was broken and we will be happy to help you with the correct part number. Looking forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Penny
February 10, 2020
My washing machine pull start is broken. Can it be replaced
For model number 127R65E66802816812
Hi Penny,
Thank you for your question. Before we can assist you further, we would need the model number from your washer. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Find-Your-Washer-Model-Number.aspx. We hope this helps. Thank you and have a great day.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mary Ann
July 20, 2021
The knob to start the dryer broke off. I need to replace the knob. Inside the knob, there are 2 numbers: Kip6uo6 and 1340349. Can you please tell me what part I need to order? My dryer model number is gler642as3
For model number GLER642AS3
Hello Mary Ann, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2330897. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Jessie
August 19, 2021
My washer and dryer set is a very old model, i’m not sure if this selection knob fit it. Please help check, thank you.
For model number 131495400
Hi Jessie,
Thank you for your question. To verify the correct knob for your washer, we would need the model number from it. If you could resubmit your question with this information, we would be happy to help you with this. Here is a link where you may find the model number on your washer, https://www.partselect.com/Find-Your-Washer-Model-Number.aspx. If you have any questions, please let us know.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dawn
November 13, 2021
Hi- I need to replace the starter knob on a Frigidaire washer dryer combo GLGT1031c. It's the 2nd knob from the left hand side, above it says "turn to start". Which knob is the right one for me to buy please? THank you
For model number GLGT1031c
Hello Dawn, thank you for writing. We have researched the model you have provided and have found the part you are looking for is PS2330889. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Joanne
January 20, 2022
The knob on my Electrolux stackable dryer is not triggering the machine to start. It normally clicks to go on.
For model number MEX731CFS0
Hi Joanne,
Thank you for your question. If the knob is not activating the start switch, then the switch may no longer be working. To verify if the start switch is working, you can test it with a multimeter. We have included a link that you may reference for information on how to test the start switch. The part number listed under your model number for the start switch is PS1146154. If you need to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
- < Prev
- 1
- 2
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2330885
Manufacturer Part Number: 134844410
Manufacturer Part Number: 134844410
Brand
Model Number
Description