Screw
$8.25
Special Order
PartSelect Number
PS234427
Manufacturer Part Number
WB1X1130
Manufactured by
GE
Product Description
Screw Specifications
Sold Individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo, Cooktop.
This part works with the following products:
Kenmore, General Electric, Hotpoint, Roper.
Part# WB1X1130 replaces these:
AP2008205, 243356, 102428, 102430, 295849, 299424, 311484, 325666, 331484, 4327611, 4331106, 4342686, 8004667, 8004686, 8004745, 8004767, WB01X1130, WB01X1135, WB01X1175, WB01X1253
...
Show more
, WB01X1294, WB1X1135, WB1X1175, WB1X1253, WB1X1294
Show less
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
GE WB44T10086 Range Convection Element AP4358533 PS2321875 interrupted
after you disconnect the direct breakers and open the oven:
1. remove the first 4 screws and the fan's cover
2. remove the short screws from element convection assembly
3. gently pool both wires and disconnect the old element (two terminals)
4. carefully insert the terminals in the new element.
5. re-screw the short 4 screws (better to buy new ones with the assembly) They are available but sold separated.
6. fix back the fan cover,
re-connect the breakers and that's it!
1. remove the first 4 screws and the fan's cover
2. remove the short screws from element convection assembly
3. gently pool both wires and disconnect the old element (two terminals)
4. carefully insert the terminals in the new element.
5. re-screw the short 4 screws (better to buy new ones with the assembly) They are available but sold separated.
6. fix back the fan cover,
re-connect the breakers and that's it!
Other Parts Used:
-
George from MILWAUKIE, OR
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old broil element started burning with being on OFF position requiring need to turn off breaker and cut element in two to stop progression of burn
1. Turn breaker off at breaker box. 2.Disconnect old broil element. Pull electric wires out 3-4 inches from BACK of oven. Clamp wires or tie off so they do not retreat behind back oven wall. INSTALL wires to new element and secure back plate. Install NEW clamps to new element. Switch on breaker and check operation.
Other Parts Used:
-
Jack from MONTGOMERY, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ivan
December 11, 2017
My socket wrenches are unable to bite on the screws holding the backplate covering fan so as to replace the broiler element. The hex heads appear very shallow, preventing socket wrenches from gripping the screws. Special wrench? Find different sockets?
For model number JKP56WD1WW
Hi Ivan, Thank you for the question. You should not have to remove the Fan to replace the element. You can remove the element from the front of the appliance. Just remove the screws that hold the back bracket in place and the brackets that hold the element up to the top of the oven. Pull the element out to expose the wires connected to the element terminals. I suggest getting a clothes pin to hold the wires so they do not fall back into the hole. Reconnect the wires and the screws and you are set.Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS234427
Manufacturer Part Number: WB1X1130
Manufacturer Part Number: WB1X1130
Brand
Model Number
Description
Kenmore
0116387363
Range
- Kenmore Range/Stove/Oven Model 011.6387363 (0116387363, 011 6387363) Parts