Product Description
Microwave Door Interlock Switch Specifications
This door interlock switch is for microwaves.
Door interlock switch prevents the microwave from starting when the door is open.
Because the microwave shielding and interlock switches must be properly tested following the door interlock switch replacement, a service technician should install this part.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Won’t turn on | Door not closing properly | Doesn’t shut off | No heat
This part works with the following products:
Microwave.
This part works with the following products:
Whirlpool, KitchenAid, Maytag, Amana.
Part# W10269458 replaces these:
AP4429884, 4393598, 8206347, W10211973
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
John D - April 15, 2021
Verified Purchase
repair turn table from turning with door open
part repaired the problem,little akward to install,smell spaces large hands,
Cheryl B - March 11, 2020
Verified Purchase
Easy repair...order two switches
Upper and lower door switches are identical and both should be replaced.
Murray P - January 21, 2019
Verified Purchase
Switch works great.
once I installed the switch my problem was fixed.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 6 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.
Other Parts Used:
-
Mark from HOMER GLEN, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
118 of 141 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Open Message
Replaced both switches on the top door latch. Diagram shows the two switches on the lower latch? No success. Still had same message on the display. Replaced lower switch, fixed the issue.
Other Parts Used:
-
Gordon from SELLERSBURG, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
20 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door open message...interior light not working when door opened....microwave would not work
Removed top vent panel....black plastic runs the length of the microwave....3 Phillips screws. Removed front right panel one Phillip screw on top right. Lift up to remove lifts off the catches. Unplug some of plug connectors on the back of the control circuit board to have room to swing it out of the way to gain access to the interlock switches. Take pictures of all disconnections and wire connectors removed from switches. There or two interlock banks of switches my problem was the top one. Remove the switch bracket held in with one star drive screw and a plastic catch on the switch bracket actuator...there is a slot in the frame the actuator slides into. Replace switches and reverse procedure to reassemble.
Other Parts Used:
-
Pat from LELAND, NC
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
18 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
open door light wouldn't come on
issues started when door opened light would flicker then come on disassembled checked switches with a meter determined switch was faulty figured I'm in here replace them all because if one fails others will follow be careful removing actuator assembly plastic is brittle (remember this is above the stove subject to heating and cooling) plastic isn't as pliable installed all the switches perfecto oh by the way disassembled the faulty switch found contacts had arced from opening door while microwave is running use the buttons to stop will eliminate further issues
Other Parts Used:
-
David from HILLSBOROUGH, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
13 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door close wasnt registering and the microwave wouldn't turn on.
I looked up a YouTube video of someone with a similar over the oven microwave. That helped me get into the area behind the control panel where the door switches are. I checked the springs and the cam rocker? The thing that actually hits the button on the switch when the door closes. They were in good condition so I assumed the door switch was bad. There are two so I just purchased one figuring (hoping) that only one was bad. And lo and behold only one was bad. Bing bam boom. Put it all back together and I'm set. Not too difficult. Took a week of work because it takes like 50 days to ship. My kitchen looked like a hurricane after image because of all the parts scattered everywhere.
Other Parts Used:
-
Tyler from PARKVILLE, MD
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
13 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The close door warning kept coming on and the microwave would not run
Don't waste your time with other parts stores online. Partselect sells quality parts and they arrived 2 days early. I purchase a door switch from another online store and the switch was defective.
Other Parts Used:
-
Jeffrey from MOUNT ULLA, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jason
December 11, 2017
Maybe 19 times out of 20, when we open the door the light doesn't turn on. When this is happening, the microwave won't work. You type in the cook time, hit start and it beeps at you. If you leave the door open for a few minutes the light will come on and then you can use it. Does this sound like a door switch?
For model number KMHS120ESS
Hi Jason,
Thank you for your question. If your microwave is not coming on, there are some parts that you will need to check to see which one is causing the issue. You will need to check the fuse, the door switches, the light socket, the interlock support and the interlock. I hope this helps. Thank you and have a great day!
20 people found this helpful.
Was this helpful?
Thank you for voting!
Monica
July 3, 2019
Intermittently i was getting the error message, close door" after making several attempts to close the door until it has stopped working completeluy
For model number WMH76719CS-1
Hello Monica, thank you for inquiring. For this symptom you will want to consider either the 3 Terminal Door Switch part PS10057151, the Door Switch part PS2361111, or the Top Interlock Support part PS11745301 for your model. We hope this helps.
13 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
November 8, 2019
Which door switch do i need to replace if the unit doesn't recognize when the door is open or closed? The problem is intermittent, so i'm pretty sure it is the switch and not the fuse. I don't want to buy all the switches - i just need to know which one is the culprit - upper or lower?? thank you!
For model number KMHS120ESS-4
Hello Greg,
Thank you for your question. The door switch you need to replace for your model is under part PS10057151 for your model. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
John
February 22, 2019
Sometimes when you shut the door the light stays on, and the fan continues to run. You have to open and close it pretty hard to turn it off. Also if you don't close the door hard enough it says door not shut.
For model number WMH53520CS-0
Hello John, thank you for your question. We would recommend testing and replacing the door switches in the unit. There are three door switches that could be faulty. They are PartSelect Number: PS2361111. PartSelect Number: PS2361113, and PartSelect Number: PS10057151. I hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Gina
February 5, 2020
Microwave says door close when it is already closed? And fan seems to be running as though door is open?
For model number MMV4205FZ1
Hello Gina, Thank you for the question. This normally indicates one or more of the Door Switches are defective and will need to be replaced. We suggest testing the switches with a multi meter and check the continuity. We hope this helps.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Elliot Shulman
February 26, 2019
I believe one or both of the door switches are not working properly, so i would like to replace both of them (top and bottom). The bottom one has two connections for wires and the top had three. Are there more than these two switches? What model numbers do i need to order from you?Thanks.
For model number Kitchenaid KHMS2040BWH-1
Hello Elliot, Thank you for contacting us. There are 3 door switches on this unit. The part numbers are as follows: PS10057151, PS2361113 and PS2361111. Have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Don Gartner
April 25, 2019
When i attempt to use the microwave i repeatedly get the message open/close door and when i do this the heating power is still not activated and the open/close message reappears. We have replace the mechanism in the door once already. Could this be the problem again?
For model number ywmh53520ch-0
Hi Don,
Thank you for your question. Here is some information from the Whirlpool website, that you may reference to try and resolve this issue, "If "Door" or "Open/Close" is appearing on your Whirlpool microwave display, there are things you can do to troubleshoot. If a message about the door appears in the display, the door has been closed for 5 minutes or more without the microwave oven being started.This occurs to avoid unintended starting of the microwave oven. Open and close the door, then start the cycle.
Next, check the follow things to make sure the door is closing correctly:
Check to make sure there is no soil build up on the door contact area
Remove all packing material from the Microwave. Be sure no packing material is blocking the door lock system.
If you have a counter top microwave, place the microwave oven on a flat and level surface that will not block the opening or closing of the microwave oven door.
Check that the cooking rack (if equipped) is not out of position and not allowing the door to close.
Close the door firmly." I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
January 9, 2019
So are there two door switches? One of each? It's easier to replace both or all three.
For model number WMH53520CS5
Hello Paul, Thank you for the question. The three switches are sold individually on this model. PartSelect Number: PS2361111, PartSelect Number: PS2361113 and PartSelect Number: PS10057151. Thank you for your inquiry, good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Bob
December 23, 2017
The top door switch went over the center and the main breaker blew. I opened the front control panel and accessed the top switch to correct the problem with latch. After replacing everything, all is fine but when the door is opened it blows the breaker again. Is the problem in one of the door switches?
For model number YWMH31017AS1
Hello Bob,
Thanks for your question. This may be an issue with the wiring to the microwave or the circuit breaker itself, but if not, the door switches are definitely worth reviewing. Have a service technician test and replace the parts if needed as they can carry high amounts of electricity even with the microwave unplugged.
I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Albert
January 25, 2018
I replaced the bottom door switch and it still does not come on. The light on the inside stays on all the time, and also the turntable moves when the door is open. Can you help me?
For model number AMV2307PFS0
Hello Albert,
Thanks for your question. It could instead be one of the other door switches causing this issue, as there are three total for your model. Only a licensed technician should attempt to install or test these parts, as they can contain an electrical charge even after the microwave is unplugged.
I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- 3
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2361111
Manufacturer Part Number: W10269458
Manufacturer Part Number: W10269458
Brand
Model Number
Description