Product Description
Hinge Kit - Left and Right Hinges Specifications
This is the replacement hinge kit for your refrigerator. This kit contains both the left and right hinges. Each hinge is made mainly of metal and plastic and is approximately 3 inches by 3 inches. This hinge kit does not contain the mounting hardware. The adjustable hinge kit supports the refrigerator and freezer doors and allows the doors to pivot open. The hinge kit also makes it easy to level the doors. This kit is a genuine OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Hinge Kit - Left and Right Hinges
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close | Clicking sound | Noisy
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Crosley.
Part# 5303918455 replaces these:
AP4510894, 1565321, 240419101, 240419102, 240419103, 240419104, 240456901, 240456902, 240456903, 240456904, 240456905, 240456906, 240537101, 240537102, 240537103, 240537104, 240537105, 240537106, 241603607, 241603701
...
Show more
, 241603702, 241603703, 241603704, 241796101, 241796102, 241813601, 241813602, 5303918433, 5303918455, 5304457964, 7241813601, 7241813602
Show less
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Sarah H - February 4, 2022
Verified Purchase
Correct parts shipped - easy to install!
Parts were shipped quickly, easy to track my shipment, and when it came to installing them, it was a 15 minute job - MAX with 2 people. Very pleased with the outcome, and now the fridge doesn’t sound like the door will fall off each time we open it!
Rafael V - September 23, 2021
Verified Purchase
Hinge kit replacement - easy fix but expensive
Our refrigerator door's "swing" mechanism had failed and the door started popping. This hinge kit fit perfectly. Just needed to get a wee bit of insulation out of the door to fit the plastic cam. The only issue, of course, is the price. Way too much money for the material. Anyone with a screw driver and a modest handy-man attitude should be able to replace these.
Jim C - September 19, 2019
Verified Purchase
Door Hinges
Received parts in a timely manner and the rectified the problem. Fridge door is now working like new.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 10 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Lost hinges when moving
Put in new hinges and two screws
Other Parts Used:
-
Janice from Osseo, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
32 of 44 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Right door makes loud poping sound when open and close
I followed step by step instruction in the hinge kit; Replacing the old hinge with a new hinge and two new plastic cams in the kit. The kit hinge has an adjustment to level the right door with the left door. Everything is done in 20 minutes for a senior guy like me. Very easy.
Other Parts Used:
-
HUNG from CARSON, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
12 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Snapping noise from bottom of refridgerator door bottom hinge.
First I looked up and called Fridgedaire. They were absolutely no help at all. No diagrams and no intelligent help.
When I found your site there was an IPB (Illustrated Parts Breakdown) diagram that helped me find the parts that I suspected as being the problem. When I found them and added them to my cart I found several comments from people who had the same problem and the same remedy to the problem. I ordered the parts, I could have got away with just replacing the door closure bearing, but I figured that the prudent thing to do while ordering parts and disassembling the door was to replace both.
I was extremley pleased with the parts service as within three days of ordering the parts they were at my home and the repair was completed.
The repair was very easy. Removed the items from the door storage, removed the upper hinge pulled the door, removed the door stop, replaced the door closure bearing reinstalled the pieces and then reinstalled the door. Piece of cake. Spent more time getting the tools together and emptying the items stored on the door then replacing the parts.
When I found your site there was an IPB (Illustrated Parts Breakdown) diagram that helped me find the parts that I suspected as being the problem. When I found them and added them to my cart I found several comments from people who had the same problem and the same remedy to the problem. I ordered the parts, I could have got away with just replacing the door closure bearing, but I figured that the prudent thing to do while ordering parts and disassembling the door was to replace both.
I was extremley pleased with the parts service as within three days of ordering the parts they were at my home and the repair was completed.
The repair was very easy. Removed the items from the door storage, removed the upper hinge pulled the door, removed the door stop, replaced the door closure bearing reinstalled the pieces and then reinstalled the door. Piece of cake. Spent more time getting the tools together and emptying the items stored on the door then replacing the parts.
Other Parts Used:
-
Dennis from Crossville, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bearing broke
Took off Door on Refr. and unscrewed Doorstop,
removed doorstop with broken Bearing and replaced with new Parts. Took about 20 Minutes
including reattaching Door. A 10 year old can do it.
removed doorstop with broken Bearing and replaced with new Parts. Took about 20 Minutes
including reattaching Door. A 10 year old can do it.
Other Parts Used:
-
Walter from Hamilton, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door had a "hitch" which made a sound when the door was opened.
I emptied the door of food, removed the top hinge by removing two screws. I then lifted the door off the lower hinge. The teflon hinge was just sitting in the bottom bearing. I removed the broken one and replaced it with the new bearing hinge. I didn't need the door stop. I then put the door back on the bottom bearing hinge and returned the top hinge. After replacing the food, the job was done and the "catch" and noise were gone! Success!
Other Parts Used:
-
Roland from Albuquerque, NM
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not close properly.
Remove the food items from the shelves on the door, Phillips screwdriver to take the top cap off. Adjustable wrench to take the two screws off the top hinge. Lift out the door and set aside. Remove two bolts from the lower hinge, reinstall with the new hinge and spacer. Reinstall door on lower hinge. Lift into place to reattach the upper hinge. Put the food back in and you're done.
Other Parts Used:
-
Brian from ROY, UT
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom hinge on door was broken made a clicking noise everytime you opened the door
just followed the instructions
Other Parts Used:
-
James from WAVERLY, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench (Adjustable)
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinge plastic closer broke
Watched the video on YouTube and followed the instructions.
Other Parts Used:
-
Cecil from CYNTHIANA, KY
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Right door wasn't closing right
Emptied everthing on the RT.Remove upper guard and hinge,lift door off of lower hinge.Set it down somewhere safe.Remove lower hinge,replace with New Hinge,Door part # 5303918455, Closer Bushing part #240457702. Put the back on the frige,Boom done.."Miller Time" [or whatever You prefer} I had this problem before,and I see Frigidaire upgraded the hinge and the Plastic Bushing..Thank You
Other Parts Used:
-
Nathaniel from Mastic, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fridge Door Would Catch When Opening Or Closing
Removed top hinge; raised and removed door from lower hinge; replaced stop; rehung door.
Other Parts Used:
-
PAUL from BROOKFIELD, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
October 11, 2017
The right (refrigerator side) door doesn't close automatically upon release. Do i need upper and lower hinge? I see the kit is for left and right hinge. ?? please clarify. thank you.
For model number GLHS66EEW9
Hi William,
Thank you for your inquiry. The hinge kit includes the left and right hinges, but there are some other parts that you will need to check to see which one is causing the issue. You will need to check the hinge bearing and the door closing cam as well. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Ravi
November 9, 2019
Kenmore “side by side fridge” right side door hinge set have to be replaced due to alignment and not properly closing problem. What part number I have to order?
For model number 106.40263 010
Hi Ravi, one of the fridge hinges is part W10287684. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry Walkler
January 25, 2020
When opening both doors there is a very loud clicking noise? Is there something worn in the hinge
For model number clicking noise opening fridge door
Hi Terry. There is no way for us to tell you sadly. It could be the hinges I would try to see if you can discern what location the noises are coming from. Thank you for your question and good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
November 14, 2021
Hi, Does this kit, part select # PS2379388 contain all the required parts to make like new or do I need to order, hinge bearing#ps429803 and door closing cam,# ps430814? Does the kit include these 2 parts? Thank you.
For model number PLHS267ZAB0
Hello Robert, Thank you for the question. The Bearing and Cam are not included with the kit and will need to be ordered separately. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2379388
Manufacturer Part Number: 5303918455
Manufacturer Part Number: 5303918455
Brand
Model Number
Description