Compression Ring
$17.00
Special Order
PartSelect Number
PS271609
Manufacturer Part Number
WH2X650
Manufactured by
GE
Product Description
Compression Ring Specifications
This compression ring works in conjunction with the timer dial.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH2X650 replaces these:
AP2044988, 279260, WH02X0650, WH02X0673, WH2X673
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Knob would not engage, had to manually turn outer ring to start washer.
Used a screw driver and needle nose pliers to remove clip from behind the timer knob. Took 2 minutes to remove clip, i admit it was a little tricky but once you get a grip on the clip very easily removed. Replaced with new knob, old knob gear was completley stripped . put the new clip on and presto, Like brand new.A normal service call would of ran me 45.00 just to tell me what was wrong with the machine.
Other Parts Used:
-
Mr Dennis from Twinsburg, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
230 of 270 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob broke off where the dial compression ring fits.
All I had to do was pull out the broken timer dial assembly and push in the new one.
Other Parts Used:
-
Gordon from BLUE DIAMOND, NV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
43 of 58 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Teeth on Timer Knob broke off
Removed timer knob clip and installed new dial and timer knob
Other Parts Used:
-
Clifford from Sun Valley, NV
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
30 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wash Cycle Selection Knob had plastic teeth on the underside that stripped out with years of use.
I used a pair of needle nose pliers and a screw drive to remove the clip holding the knob on its shaft. The new knob came with its clip already in place, so it "popped" right on. I ordered the compression ring in error and it it was not needed
Other Parts Used:
-
Dennis from Middletown, RI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
18 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
timer knob defective
After viewing the brief video supplied by you,it was a simple five minute fix.
Other Parts Used:
-
JAMES from Boca Raton, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
5 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
August 8, 2019
I require the "collar ring" which sits behind the cycle dial on this model
For model number GBXR1060T5WW
Hi Frank, thank you for your question. There is no collar ring. There is a compression ring which is the part that you have questioned on. If that is not the part that you are looking for then the ring you are looking for would either come with the timer knob or the dial itself. I have linked the parts below for you. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Joanne
February 24, 2022
Know spins and seems loose in the enclosed back
For model number WJSR2080V1ww
Hi Joanne,
Thank you for your question. If the knob is loose and spins when the washer is in use, you will need to replace the knob, part number PS271124, the clip, part number PS270835, the compression ring, part number PS271609, or the dial, part number PS269445. If you would like to place an order for one of these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS271609
Manufacturer Part Number: WH2X650
Manufacturer Part Number: WH2X650
Brand
Model Number
Description