Product Description
Door Stop - black Specifications
This part is the replacement door stop for your refrigerator. It is made of black plastic and is approximately 2 inches by 1 ½ inches in size. The door stop attaches to the bottom of the door and prevents it from swinging open and hitting the refrigerator cabinet. If your door opens too far, or opens with little resistance, it could be an indication that you need to replace the door stop. You will also want to replace the door stop if it is cracked, broken, or missing. This part is sold individually and is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint.
Part# WR02X10782 replaces these:
AP3670365, 912881, WR2X10782
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Emad A - June 20, 2020
Verified Purchase
Exact part
The part Was as expected, and received super fast.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 6 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
door stop broken from fatigue
using a small socket wrench and star shaped driver I (1) removed the two screws that held the broken stop from the bottom of the door, and (2) replaced the new stop and screwed it back in. The most difficult part of the job was opening the door in order to access the second screw.
Other Parts Used:
-
Darrell from Long Beach, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
10 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Door Stop
Suggest removing black plastic grill first to gain better access to door stop screws. The grill is attached by two phillips screws, one on either end and several metal spring clips in the middle. The door stop is held by two star shaped screws that are only visible with a mirror. Suggest using a bit attached to a small ratchet.
Other Parts Used:
-
Mark from Stuart, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
10 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door stop
Repairs on purchase of the parts were easy and went great
Other Parts Used:
-
Gary from Harper, IA
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
7 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not stop when opened, slammed against cabinet
Never did repair. Parts ordered on April 3 and not received by April 18th! Email sent to customer service on 4/16/20 requesting full refund. To date no acknowledgement! Will not order from PartsSelect again.
Other Parts Used:
-
Jeff from COROLLA, NC
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door stop broke due to fatigue
The door stop is held by 2 TORX screws and can be removed in place without raising the refrigerator. The only tricky part is that you only have about 2 inches of clearance so it is hard to locate/see the screw heads. I used a small mirror to help me align the tool with the screw. If you have a small ratchet with a TORX socket it will make your installation go much faster. Each turn of the tool required me to remove and reinsert the tool. This is what takes up so much time.
Other Parts Used:
-
Takashi from Chesapeake, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door stop broke on the sibe by side Fridg
Needed to remove and replace the door stop. It was held on by tow screws that are about 3 inches from the floor. God a hex driver and small ratchet to hold the hex head. unscrewed the old and replaced the new. I did take a picture with my phone and it showed the two screws.
Other Parts Used:
-
Steve from JACKSON, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS285193
Manufacturer Part Number: WR02X10782
Manufacturer Part Number: WR02X10782
Brand
Model Number
Description