Product Description
Add-On Icemaker Assembly Specifications
This icemaker kit comes with a flat plug, wiring harness, fill tube, water inlet valve, ice bin, mounting hardware, and instructions.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Leaking | Ice maker won’t dispense ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Kenmore, Roper, KitchenAid.
Part# 1129316 replaces these:
AP3062348, 2295, 1129316, 1018, 1108106, 1108154, 1114209, 1118766, 1127599, 1129302, 1129303, 1129306, 1129316, 1129316VP, 1129317, 1129318, 2155184, 2155185, 2155186, 2155187
...
Show more
, 2155188, 2155304, 8090, 8239, 8440, 8550, 944804, ECK-MF83, ECK-MF831, ECK-MF86, ECK-MF87, ECK-MF90, ECKMF-83, ECKMF-90, ECKMF83, ECKMF831, ECKMF86, ECKMF87, ECKMF90, IMKIT, KIMS8
Show less
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Wassim E - August 15, 2024
Verified Purchase
Easy replacement
The ice maker seems a bit smaller than the one I had (not sure if I had the right part number) however I am preferring over what I had and it's working perfectly and better than the old one
..had to lift the handle so I can catchup emptying the ice lol.
Thank you part select!!!!!
Dave B - October 13, 2022
Verified Purchase
Worked as expected
Great condition, easy replacement part.
Will W - May 23, 2019
Verified Purchase
Worked as expected.
Replaced an old one. Needed water valve too so bought whole kit. Needed to customize a little and used old wire harness. The one provided didn’t fit easily. All in all good thing I’m handy. But now I have great ice!!
Dennis A - October 22, 2018
Verified Purchase
worked as expected
Very speedy delivery. Installed and up and running.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 16 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Orig Ice maker died
I was able to salvage the existing wiring and simply replace the ice maker itself and the valve located at the bottom-rear of the frig.
Simply removed and replaced the screws, changed the water tube and connected everything back up. I probably spent more time cleaning behind the frig that replacing the parts.
Very pleased with how quickly the parts came and everything was included!
Simply removed and replaced the screws, changed the water tube and connected everything back up. I probably spent more time cleaning behind the frig that replacing the parts.
Very pleased with how quickly the parts came and everything was included!
Other Parts Used:
-
Al from Frankfort, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench (Adjustable)
18 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Was not making ice and the filler tray was chipping material.
With a socket set and screw driver I removed the old ic e maker . It took about 1 hr. I worked slowly as not to make a mistake. The only part that gave me a problem was the plug. You need to take off the face cover to press down on the plastic release clip. Putting it back took half the time because you knew what to look for.Just plug it in and mount the screws back in place , make sure it was level and I had ice in about an hour.
Other Parts Used:
-
Robert from Hummelstown, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
16 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker broken
I had already removed the old Ice maker, so it was no longer in.
When the new ice maker arrived, I simply pluged it in, replaced the screws that hold it in place and turned the water back on to the ice maker.
It was that easy.
When the new ice maker arrived, I simply pluged it in, replaced the screws that hold it in place and turned the water back on to the ice maker.
It was that easy.
Other Parts Used:
-
Gloria from Folsom, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker was not working
-
Felix A from Orlando, FL
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set
6 of 34 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice tray was leaking water
Unplugged wire, loosened two screws on top took out lower screw.Lifted the ice maker up and out it came. The wiring that came with the new part was to short so we unplugged ours from the old part and used it:) was really easy and works great now no leaks
Other Parts Used:
-
Brenda from Henderson, NV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the ice maker quit producing ice.
I removed 1 bottom screw and 2 upper screws useing a 1/4 inch socket nut driver. then useing a flat edge screwdriver i incerted in slot to remove wiring cluster. to install just reverse process. you maye have to cut u-shape slot for water spout to sit in.
Other Parts Used:
-
darryl from little york, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
botrailer with frig without a icemaker
got the icemaker kit and started to add it to the frig found problems with the adaption to the frig in back for water filler tube but was able to make it fit. had to make a connection outside to water line with copper pipe added to hose with claps and saddle valve, turned it on and had leaks due to the schedule copper was the thin wall type, got thicker type and installed it, no leaks, started making ice. it was nice to get the right kit to make things work out. thanks
Other Parts Used:
-
rich from racine, WI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Wrench (Adjustable)
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker motor excessive slip (essentially worn out) & contacts were worn
1 removed bottom off old ice maker (3 hex screws) and ice drop shield (white plastic ice flips over into ice holder, old unit had different drop angle, see how described below, but I just musled it off the old unit) 2 removed "ice sensing bar off new ice maker and rotated mechanical sensor to on (leatherman tiny flat head) 3 removed end cap from new ice maker, then loosened to large screws (Phillips, leatherman) for motor unit cover. This allowed removal of ice drop shield on new unit (two tabs, one at each end). 4 removed ice drop shield and installed old ice dropshield on new unit 5 tightened two endcap screws (Phillips/leatherman) and reinstalled end cap 6 installed old bottom unit/tray on new ice maker (3 screws) 7 ensured wiring matched and routed plug properly 8 installed unit slides in 9 plugged unit to existing plug 10 installed old wiring shield (1 hex screw). Waited two hours to verify water valve worked properly, although IR codes did indicate "okay". Machine has been making ice and IR sensor shuts it off properly. So far a success. I have many spare parts if I need to do further repairs including a new water solenoid. Only saying it was a bit difficult because of the parts exchange, in actuality for me it was really easy.
Other Parts Used:
-
Richard from Blue Ridge, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ise Maker Broke
Followed the easy to read instructions and bingo in less than 15 minutes repair completed
Other Parts Used:
-
john from hudson, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old ice maker quit making ice
replaced ice maker with recommended add on kit. easy to replace exact replacement. used this company for washing machine part. parts correct both times.
Other Parts Used:
-
CONRAD from RENICK, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
BJ
November 4, 2019
Ice maker ejector does not return to home after ejecting ice cubes, only returned 1/2 way so it does not refill.
For model number ED25PWXAW00
Hi BJ,
Thank you for your question. If the ejector arm is not going back down after ejecting ice, it may be worn or there may be an issue where it is connected to the ice maker. If the issue is not where the part is connected to the ice maker, the ejector arm may need to be replaced. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
July 18, 2019
Is this ice maker kit compatible with our Whirlpool refrigerator model provided above. Thanks
Hello Brian, thank you for inquiring. This Ice Maker Assembly is not shown as compatible to your model. The replacement for your model is Ice Maker Assembly part PS11757273. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
September 6, 2023
Does this kit fit my refrigerator?
For model number Kenmore 106.56983601
Hello Mike, thank you for reaching out. This ice maker assembly is not compatible with your model. For your model, the ice maker and other parts are available separately. You may have to order the ice maker, part number PS11749920, the front cover, part number PS11752097, the shut off arm, part number PS12712096, the water line, part number PS11730901, and the water inlet valve, part number PS3497634. We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
L
October 9, 2017
Can we get the inlet valve without the whole kit
For model number ET20DK
Hi L,
Thank you for your inquiry. In order to get the water inlet valve you will need to purchase the kit. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Nathaniel
November 19, 2018
I have acquired a Whirlpool model et18lkxhn0 refrigerator freezer and the back has rubber water inlet and word "ice magic". Inside freezer left rear is an electrical harness and water connection. I would like to purchaser an ice maker and install it in my freezer. The serial number is ej4914569. Can you please tell me the part number of the ice maker that will work in my freezer.Thank you.
For model number ET18LKXHN0
Hello Nathaniel, Thank you for the question. For the add on Ice Maker Kits, you will need to contact Whirlpool to see if they can provide the part number for the kit that is compatible with your model. Once you have the part number you can contact us back to see if it is something we carry. Looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Chad
July 30, 2019
What is the part number of the long wiring harness in this kit
Hi Chad,
Thank you for your question. Where the wiring harness is sold with the kit, the part number for it is not available. If you need the harness, you will need to purchase the ice maker assembly. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Mitch
January 5, 2024
It the PS317560 kit the correct one for the Kenmore 59667253600, need icemaker only?
For model number 59667253600
Hello Mitch, thank you for your inquiry. The part you mentioned is not compatible with your model. The compatible ice maker for your model is part number PS2121513. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
Dennis
December 14, 2019
How do I stop this ice maker from making ice? The metal lever seems loose and does not shut off the ice maker when full it just keeps making ice.
For model number 1129316
Hi Dennis, you may need to replace the bail arm. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Brian
January 31, 2022
Is this an 8 prong electrical plug.
For model number WRT138FZDW00
Hello Brian, Thank you for the question. This shows to be a 4 prong plug. We hope this helps!
Was this helpful?
Thank you for voting!
Tyler
February 23, 2022
I have an Inglis 1RT184300 refridgerator. Can you confirm that this is the correct part number for a complete Ice cube maker assembly?
For model number 1RT184300
Hello Tyler, thank you for writing. Yes, the part PartSelect Number PS317560 you had chosen is compatible. We hope to hear from you soon.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS317560
Manufacturer Part Number: 1129316
Manufacturer Part Number: 1129316
Brand
Model Number
Description