Part Location Diagram of W10195416 Whirlpool Lower Dishrack Wheel
See part 2 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Lower Dishrack Wheel

★★★★★
★★★★★
217 Reviews
$58.71
  On Order
PartSelect Number PS3406971
Manufacturer Part Number W10195416
Manufactured by Whirlpool
Product Description

Lower Dishrack Wheel Specifications

This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult. This can happen due to normal wear and tear, and the part should be replaced if this occurs. Check your model number and user manual to make sure this part is correct. It attaches directly to the dishrack. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. It measures roughly 3x6 inches.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Door won’t close | Noisy | Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Whirlpool, Maytag, Kenmore.
Part# W10195416 replaces these:
W10195416V, W10195416VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
217 Reviews
4.7
Filter By Rating:
  • 5 Stars
    175
  • 4 Stars
    25
  • 3 Stars
    13
  • 2 Stars
    1
  • 1 Star
    3
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.8 / 5.0, 28 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Broken wheel unit on the bottom dish rack
All you do is pop out the old wheel unit at two (2) points on the plastic wheel housing and pop in the new one. Easy fix. Less than a 5 minute fix.
Other Parts Used:
  • Thomas from WEST OLIVE, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
92 of 106 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel on lower shelf broke off
Simply snap the old one off and snap the new one on. Simple as that less than 15 seconds.
Other Parts Used:
  • Dennis from OAKWOOD, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
30 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All of the wheels had broken off and the bottom rack was hard to move.
It was very easy to pry off the old wheel assemblies with a screwdriver and pop the new ones in place. Although the part is called "wheel" it is actually the plastic piece containing two wheels. I thought it was a little confusing to just call it "wheel" as each piece has two wheels. It was an easy repair.
Other Parts Used:
  • Cheryl from VANCOUVER, WA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
20 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
two wheels sets were Broken
Removed bad wheel sets using screw driver to help pry broken part loose. Then just snapped in replacement. Took less than 5 mins. Now it works great.
Other Parts Used:
  • KEITHCOLONA from ROANOKE, VA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
11 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel assembly broken
Very easy to repair with the replacement wheel assembly. Popped out the broken one, popped in the new one. Price was nothing compared to having an professional repair person come to the home. Glad I found you on line!
Other Parts Used:
  • Daryle from WEYMOUTH, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom rack wheels needed to be replaced
all 4 wheel units needed to be replaced, popped them off and installed need wheel units in roughly 10 minutes, no tools needed.
Other Parts Used:
  • Raymond from BELLINGHAM, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel fell off
followed video instruction
Other Parts Used:
  • Richard from BOSTON, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rollers broke on right side of upper rack adjustment.
I followed the instructions on your recommended video; so easy! Thank you!
Other Parts Used:
Dishwasher Dish Rack Adjuster Kit - Left and Right Side
  • Geneva from OWENS X RDS, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
7 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel assembly broke
I opened the package took out the replacement part and installed it with no tools. Easy, done in 10 minutes.
Other Parts Used:
  • Royce from MODESTO, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
6 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced lower rack wheel assembly
watched video took less than 5 min to replace veeeery easy to do
Other Parts Used:
  • philip from racine, WI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
December 11, 2023
How many wheel assemblies come in the order?
For model number WDT910SAYH0
PartSelect logo
Hello Susan, thank you for reaching out. The dish-rack roller is sold individually. We hope this information helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Lawrence
November 21, 2023
For a broken wheel on bottom rack can I replace the wheel only or do you have to replace whole wheel assembly ?
For model number MDB8959SFZ4
PartSelect logo
Hi Lawrence, Thank you for writing. The Wheel is not sold on its own sorry, the whole Wheel Assembly will need to be replaced. We hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Lauren
February 25, 2024
Hi, do these wheels work with the above model?
For model number JDB9000CWS2
PartSelect logo
Hello Lauren, thank you for your your question. No. The correct Lower Dishrack Wheel is PS11750057. Good luck and have a great day.

Was this helpful?
Thank you for voting!
Related Parts:
Susan
13 days ago
I lost a pin that holds the wheel on the bottom dish rack. Is there some way I can purchase a couple of pins only or do I have to buy the entire wheel mechanism?
For model number KUDC10IXWH4
PartSelect logo
Hello Susan, thank you for reaching out. You will need to buy the whole lower dishrack wheel, part number PS3406971. If you need help placing an order for it, please feel free to give us a call!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3406971
Manufacturer Part Number: W10195416
Brand
Model Number
Description
Whirlpool
66213292K112
Dishwasher - Whirlpool Dishwasher 66213292k112
Whirlpool
66213299K112
Dishwasher - Whirlpool Dishwasher 66213299k112
Kenmore
66513222N410
Dishwasher - DISHWASHER
Kenmore
66513222N411
Dishwasher - DISHWASHER
Kenmore
66513222N412
Dishwasher - DISHWASHER
Kenmore
66513222N413
Dishwasher - DISHWASHER
Kenmore
66513223N410
Dishwasher - DISHWASHER
Kenmore
66513223N411
Dishwasher - DISHWASHER
Kenmore
66513223N412
Dishwasher - DISHWASHER
Kenmore
66513223N413
Dishwasher - DISHWASHER
Kenmore
66513223N414
Dishwasher - Dishwasher
Kenmore
66513229N410
Dishwasher - DISHWASHER
Kenmore
66513229N411
Dishwasher - DISHWASHER
Kenmore
66513229N412
Dishwasher - DISHWASHER
Kenmore
66513229N413
Dishwasher - DISHWASHER
Kenmore
66513229N414
Dishwasher - Dishwasher
Kenmore
66513252K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513252K111
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513252K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513252K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513252K114
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513252K115
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513253K110
Dishwasher - Kenmore Dishwasher Model 665.13253K110 (66513253K110, 665 13253K110) Parts
Kenmore
66513255K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513255K111
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513255K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513255K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513255K114
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513255K115
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513259K110
Dishwasher - UNDERCOUNTER DISHWASHER
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service