We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jose
July 24, 2017
The belt # pje1300 it's good for this model
For model number GFWH2400L0WW
Hi Jose,
Thank you for contacting us. The belt listed for model number GFWH2400L0WW is PS3487272 (WH08X10050).
Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Glenn
December 22, 2019
When the washing machine did the final high speed spin the machine made more noise than usual and when I opened the washer door, lots of smoke came out. What parts do I need and can I fix it. I'm pretty mechanically inclined.Thanks glenn
For model number GFWH2400L0WW
Hi Glenn, you may need to replace the motor. If you hear squealing it could also be a bad/faulty driver belt. If you gave us more info, sounds you hear, where exactly the smoke is coming from we may be able to narrow it down more. Thank you for your question and good luck with your repair!
My washer washes but i won't wring or spin to go to the rinse cycle
For model number GFW450SSM1WW
Hi John, thank you for your inquiry. Your washing machine needs sufficient water pressure to remove the detergent from the drawer. Check the water pressure either by looking at the pressure gauge attached to the waterline, or by attaching pressure gauge to the valve behind your washing machine. Check the water inlet valve screens and hoses for blockages. Also, make sure the pump filter, drain hose are not clogged and drain hose is not kinked. The pump filter should be cleaned every three months or when it is clogged. This filter is installed to catch foreign items like buttons or coins and to prevent these items from entering the drain hose. It is located at the bottom right-hand corner of your machine. If all checks are fine, the most probable cause is a fault drain pump, part number PS16743374. Good luck with the repair!
Was this helpful?
Thank you for voting!
Ron
December 27, 2023
When the washer goes to the spin cycle it is now off balance. This is happening on all load types.
What do I check for????
For model number GFWN1600J1WW
Hello Ron, thank you for your inquiry. According to our research, the issue is with the shock absorber, part number PS11701130. We would recommend checking the shock absorbers and replace the faulty one. We hope this information helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3487272
Manufacturer Part Number: WH08X10050
