Part Location Diagram of 297309000 Frigidaire FAN MOTOR EVAP 115V
See part 13 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

FAN MOTOR EVAP 115V

★★★★★
★★★★★
4 Reviews
$119.06
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS3502361
Manufacturer Part Number 297309000
Manufactured by Frigidaire
Product Description

FAN MOTOR EVAP 115V Specifications

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Too warm | Noisy | Won’t start | Fridge too warm
This part works with the following products:
Freezer, Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Electrolux, Crosley.
Part# 297309000 replaces these:
216914200, 216934100, 297250000, 5304442624, 7216914200, 7216934100, 7297250000
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    4
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 6 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Freezer thawing at about 20 degrees
Turned freezer off at themostat and unplugged freezer. Removed 2 screws at front 2 at the back and 2 at the top. Lowered top cover and removed evaporator fan bracket (2 more screws) removed themostat capulary tube( 1 screw and bracket) then unplug fan motor. Removed motor from bracket (2 screws). Put on new fan motor then removed fan blade from old motor and put on the new motor. Remounted fan motor bracket and thermostat capulary tube. Remounted top cover, plugged freezer in the set the thermostat to 4 and freezer is working fine and doing its job. I orderedmotor on a Sunday and it was shipped on Monday and I received said part at 7:pm on Wednesday.
Other Parts Used:
  • Nathan M. from Bunnell, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
21 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Evap fan motor intermitant
Removed evap cover from Commercial Refrigerator. Removed mounting screws from Evap motor mount. Replaced evap fan motor. Repositioned. Reinstalled evap cover. Tested . This motor was hard to find locally. Glad I called.
Other Parts Used:
  • Mike from Los Banos, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
11 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Squealing noise and bottom half of freezer only froze
I removed the shelves, unscrewed the cover panel of the fan motor and regulator dial, disconnected the fan motor from power, unscrewed 2 screws holding the motor to the mounting bracket and put the new motor in it's place. New motor had no thread in the mounting holes, so I put new tread in so I could use the 2 screws. Another option would have been to drill all the way through the mounting holes and use longer screws or bolts. Of course I turned the power off before I started repairs. Freezer runs like new now. Technicians wanted $400 for the job, while it cost me a mere $55 for the Motor.
Other Parts Used:
  • Walter from SALT LAKE CTY, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wouldn't freeze, bottom of freezer still cold, but middle and higher areas were warm and everything was thawing out.
very simple,started by turning off the power to that outlet (in breaker panel) then removed the 3 bottom screws, 2 side screws and 3 top screws (all 8 screws are Phillips head) in order to remove the panel. Disconnected the motor (unplugged it) and removed the 2 screws holding the motor in place to remove the motor. I installed the Fan on the new motor, and remounted it in place , reconnected it and replaced the panel and all 8 screws. (and the side seals push back into place easily after you replace all the panel screws.
Very easy, it took less than 15 minutes to make repairs and freezer was back in operation and back to below freezing temps in less than an hour.
Other Parts Used:
FAN
  • George from ROAN MOUNTAIN, TN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan motor died.
Remove shelves. Unplug unit. Unscrew back panel. Remove wire harness. Remove old fan. Insert new fan. Screw it in. Reattach wires harness. Plug unit in and make sure fan is on.
Reattach back panel. Put shelves back in.
Other Parts Used:
Basket Bumper
  • Yvonne from CORP CHRISTI, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fan would not turn on
easy change less than 10 min
Other Parts Used:
Defrost Thermostat Freezer Door Key
  • kevin from NINEVEH, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tiffany
May 8, 2023
Would this part be defective if the back of the bottom of the fridge and coils are frozen over?
For model number FPRH19D7LF1
PartSelect logo
Hello Tiffany, thank you for contacting us. According to our research, you may need to replace the defrost heater, part number PS426768, to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
;
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3502361
Manufacturer Part Number: 297309000
Brand
Model Number
Description
Kenmore
25314772100
Freezer
Kenmore
25314772101
Freezer
Kenmore
25314772102
Freezer
Kenmore
25314772103
Freezer
Kenmore
25316562100
Freezer
Kenmore
25316562101
Freezer
Kenmore
25316572100
Freezer
Kenmore
25316572101
Freezer
Kenmore
25322040510
Freezer - UPRIGHT FREEZER
Kenmore
25322042410
Freezer - FREEZER
Kenmore
25322042411
Freezer - Upright Freezer
Kenmore
25322042412
Freezer - Upright Freezer
Kenmore
25322052610
Freezer - FREEZER
Kenmore
25322052611
Freezer - Upright Freezer
Kenmore
25322442410
Freezer - FREEZER
Kenmore
25322442411
Freezer - FREEZER
Kenmore
25322442412
Freezer - FREEZER
Kenmore
25322442415
Freezer - Upright Freezer
Kenmore
25322442416
Freezer - Upright Freezer
Kenmore
25322742410
Freezer - FREEZER
Kenmore
25322742411
Freezer - Upright Freezer
Kenmore
25322742412
Freezer - Upright Freezer
Kenmore
25323024102
Freezer
Kenmore
25323024103
Freezer
Kenmore
25323024104
Freezer
Kenmore
25323082102
Freezer
Kenmore
25323082103
Freezer
Kenmore
25323082104
Freezer
Kenmore
25323424102
Freezer
Kenmore
25323424104
Freezer
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service