Product Description
Refrigerator Door Switch Specifications
This door switch is used in refrigerators. It is activated by the closing and opening of the door
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Light not working
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
LG, Kenmore.
Part# 6600JB1010A replaces these:
AP4442090, 6600JB1004A, 6600JB1004G, 6600JB1004H, 6600JB1004N, 6600JB1010A
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Robert K - November 11, 2021
Verified Purchase
Very easy to install
part was as ordered , I installed and light in fridge is working well
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 27 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Remove and replace light switch
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Other Parts Used:
-
Debbie from Waltham, MA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
37 of 62 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fridge light would not come on.
After watching a few iTunes videos I was able to order the light switch from part select and within a week I had the new switch. I had a little trouble getting the switch out. I used a flat screw driver and taped around the edge to keep from damaging the wall inside. I found the clip on the right side and had to use some force to get it popped out, you may need to use pliers to disconnect the switch.
Other Parts Used:
-
Grace from GALLOWAY, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
9 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light stopped working
Have had the Sears repairman come to the house to replace this part in 5 minutes for +$100.. twice. When my dad's stopped working, ordered the part and replaced it myself for the cost of the part and shipping.
Use a screw driver to pry the right side of the switch and pull out. Best to watch a youtube video first. Takes about 5 minutes.
Use a screw driver to pry the right side of the switch and pull out. Best to watch a youtube video first. Takes about 5 minutes.
Other Parts Used:
-
Tamara from MONDOVI, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
6 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator light not coming on when door opens.
Unplugged the refrigerator. Used small flat head screw driver to push the front tab of the old switch in and pulled it out with pliers. Detached and reattached the wires to the switch. Reinserted back into hole. Plugged refrigerator back in to power. All good.
Other Parts Used:
-
John from BONITA SPGS, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad Push Button Switch
I followed the directions! It was so easy that I bought another switch for my sister's fridge (same as mine). Her light was out too!
Other Parts Used:
-
Dorothy from KINGMAN, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator light not working. If I would flick the button it would go on for a minute but not stay on.
The old switch was a little hard to get out....took me a couple tries. I couldn’t move the frig out to unplug it, so just shut the power off in the kitchen. But, I was happy that’s what the problem was and so happy to have the light back on......it was probably three years it didn’t work!
Other Parts Used:
-
Dawn from NORTH BRANCH, MN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
interior light switch did not turn off light in ref
pried out old switch, disconnected wires ,placed wires on new switch
Other Parts Used:
-
Timothy from SUSANVILLE, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light doesn’t come on when fridge door opens
Pulled fridge away from wall, unplug electrical connection, open fridge door, use knife to prize out door switch, pull off and replace switch from electrical wiring.
Other Parts Used:
-
Lloyd G from QUEENS VLG, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator light would not reliably turn on when the door was opened.
Switched the refrigerator circuit breaker to off. Put tape around the switch to prevent scratches. Wedged the putty knife into the right side of the switch and pried up.the switch and connector popped out. Removed the connector from the old switch and connected it to the socket in the new switch. Stuffed the new switch and connector back into its home. Switched on the circuit breaker. Now we have light in the refrigerator with every opening!
Other Parts Used:
-
William from TUCSON, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lights out on refrigerator
Unplugged the refrigerator, Taped around the edges of switch as I had read to prevent possible scratches, used very thin flathead screwdriver to pry out old switch, unplugged old switch, plugged in new switch, put it back in opening, plugged fridge back in, and I had beautiful light! Hardest part was unplugging the refrigerator!
Other Parts Used:
-
Victoria from Oak Grove, KY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
November 4, 2019
How do i remove the old switch ?
For model number 795 76203 901
Hello Peter, thank you for your question. First unplug the appliance. Take a small flat head screwdriver and get in between the liner and the switch. There is a tab that you will release on the switch the light can be pulled out, the wire harness disconnected and the new part installed. I hope this helps!
21 people found this helpful.
Was this helpful?
Thank you for voting!
Ruth
November 16, 2017
The light in fridge is not not working at all.If I push the inside gizmo and hold it for a while....maybe the light will come on but it won't stay on.How do I know if it is the light bulb or the mechanism that fits in the place that I push to try to activate the light.How do I problem solve to know the exact thing to order?
For model number 79576202901
Hi Ruth , Thank you for the question. The only way to know for sure what part is defective before placing an order is to test the switch and the socket with an Multi Meter and check for continuity. If the light eventually turns on, it is mostly likely the light switch. If the bulb or socket were bad they usually would not turn on at all. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
John
August 1, 2017
Does this part fit my refrig? My existing switch as a pointed tip much like the end of a dowel. Please advise
For model number kenmore 795.77573600
Hi John,
Thank you for the great question. There are two switches listed underneath your appliance. Part number PS3529282, is listed as 402A in your diagram. This part is grey and does have a dowel like tip. If you search the part number in our website you will see a picture of the part. You also have part number PS3529268, which is listed as 406B in your diagram. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Jason
August 9, 2019
I am looking for a filter on the ice machine, where is it located?
For model number 79576203901
Hello Jason, thank you for your question. There is not filtration system on this unit. The water goes to the icemaker directly from the water valve. I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
JUDY
April 15, 2018
The frige is working good as far as cooling and freezing. There is a continual 3 beep alarm when i open the door to the freezer or refrigerator sometime the lights are off i can close the doors and the lights will come on but the beeping continues.
For model number LRBC20512WW
Hello Judy, thank you for your question. The alarm and lights issue could have something to do with the door switches. I would recommend testing the Switch,Push Button 6600JB1010A to see if they are faulty. The switch is spring-loaded and is a generally closed type of switch meaning there should be no continuity when the button is pushed, and continuity through the switch when it is no longer engaged. This can be tested with a multimeter. If the switches are tested and are working properly, the issue is probably with the electronic control board in the unit. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
December 10, 2019
Both lights in refrigerator section, as a pair, either work, or not, when door is opened. A couple of years ago this same phenomenon happened and after a couple of days seemed to fix itself. Now, it's back and it's been with us two days now. Also, when these episodes occur, there is a mild electrical smell. Don't think it's the bulbs. Your thoughts?
For model number LFX25950SW
Hello John, thank you for your question. It sounds like the sockets may need to be replaced. We would recommend removing the bulbs, and inspecting the sockets for burns or breaks in the wires. PartSelect Number PS3529355 that is the part number for the socket assembly. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Pam
July 19, 2021
I’ve replaced the refrigerator door switch three times and now it is not functioning again. How many times should this happen. This is getting ridiculous.
For model number 79578099901
Hello Pam, Thank you for the question. This could be an issue with the wiring to the switch or the light socket shorting out the Switch. We suggest checking the wiring. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Edward
May 7, 2022
Need to replace light switch on my Kenmore refrigerator. What switch works on this model ?
For model number 795.76202.901
Hello Edward, thank you for writing. Yes, the number PS3529268 you had chosen is compatible with your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ladine
August 21, 2019
What is a multi meter?
Hello Ladine, Thank you for the question. A Multi Meter is a tool used to test electrical parts for Ohms and continuity ect. Here is a video that may help. Good luck with the repair!
https://www.youtube.com/watch?v=bWC44fHn0As
1 person found this helpful.
Was this helpful?
Thank you for voting!
Timothy
February 1, 2020
No light in fridge. When i push the door switch, the fridge/freezer temp readouts toggle on/off (located in same assembly as two light bulbs), but lights do not come on. Is switch working then? Maybe light socket is the culprit?
For model number 795.76203.901
Hello and thank you for writing.
It certainly sounds more like it could be a faulty light socket PS3529355 rather than the switch you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3529268
Manufacturer Part Number: 6600JB1010A
Manufacturer Part Number: 6600JB1010A
Brand
Model Number
Description