Product Description
Dryer Lint Filter Specifications
The Dryer's Lint Filter is used to collect lint during the dryer cycle as it passes through the dryer vent, in order to prevent damage to the machine. This manufacturer-approved part comes in gray, measures around 12 inches wide by 11 inches high, and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. We recommend that you thoroughly clean the lint filter before every load, but even with good maintenance, this hard-working part is often damaged or worn over time. If your dryer isn't drying quickly, the filter may be responsible. The manufacturer has made an authorized substitution to the lint filter. Special details: When replacing lint screen ADQ56656401 you may need to also replace lint screen housing MCK49049101 and lint screen guide MEA49050001 to prevent items from catching on the lint screen, depending on your model.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Marks left on clothes | Door won’t close
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
LG, Kenmore.
Part# ADQ56656401 replaces these:
AP4457244, 1462822, ADQ56656401, ADQ56656401
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Marie V - 28 days ago
Verified Purchase
Quick response
Got the filter quickly and it works well.
Elena I - June 23, 2024
Verified Purchase
Fits perfectly
I was worried for nothing :)
This part fits very well into my old LG drier. Very happy - no more damaged clothes.
Michael C - December 20, 2023
Verified Purchase
worked as hoped
Original part didn't fit replacement did. People who wrote in with same problem were key to my buying filter.
Peter M - November 19, 2023
Verified Purchase
Simple Repair
Lint catcher, very simple to replace.
Karine L - July 25, 2023
Verified Purchase
So happy I replaced this part
My dryer filter had a dent and was always catching on the clothes I was putting in the machine. I damaged lots of clothes with it. I am so happy, I replaced it with a new one. It was easy to find and order on the site. It arrived fast, I regret not doing this sooner.
Jenn D - May 6, 2023
Verified Purchase
Fit perfect
A perfect fit
Jill A - April 5, 2023
Verified Purchase
Great part replacement
Easy to order & fast delivery
Kevin W - April 3, 2023
Verified Purchase
Very efficient
Works well
SHELLEY S - October 12, 2022
Verified Purchase
Dryer filter
Arrived quickly. Pleased with this purchase.
Bruce W - July 28, 2022
Verified Purchase
Easy fix
Quick delivery. Product as described
- < Prev
- 1
- 2
- 3
- Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 14 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Filter parts chipped - replaced
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw.
Other Parts Used:
-
David from Annapolis, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
51 of 91 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The lint dryer filter was not fitting in correctly so it sticks out a bit and while clothes are drying it was catching it and ripping/twisting and damaging all my clothes
I bought the whole dryer filter kit, but turns out I only needed the dryer filter and am very happy about that. No tools necessary I just slid it right in. It fit perfectly and I no longer have anxiety about my clothes coming out ripped.
Other Parts Used:
-
Luciana from PRT WASHINGTN, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
23 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
We have ruined hundreds and thousands of dollars the past decade on our LG typical detective lint filter!
I watched a You Tube Video. It instructed me to take the top, front, and door off. Not necessary!!! But definitely unplug it as there is a moisture sensor attached inside this housing. Remove current Filter. Remove all screws holding the two key pieces in (Filter Cover and Guide). Disconnect the moisture sensor (mine is white wires connected to two metal prongs). Remove the Filter Cover and Filter Guide and discard. Get a long vaccum hose and remove all visible lint in the area below where the Filter Guide resides. Replace the Filter Guide and reconnect the moisture sensor, replace the Filter Cover. You may find it easier to snap these two pieces together before installing. Make sure the small plastic guides on the inside of the drum snap in tightly to the tei guide holes, then replace all screws. Note- Part Select does not send screws, so save your screws from the old parts and take note which are longer and go where. Tighten, but do not over tighten. If you were successful, the Filter Cover and Guide should be smooth with the edge of the drum and door. Install your new Filter, plug back in, and enjoy! I can FINALLY dry tank tops, open shoulder, and key hole tops, as well as sheets without my dryer eating them. Only problem is that I wish I had done it sooner. Note, I'm a female with no electrical or appliance repair experience. I did this on my lunch break and surprised my husband when he got home! Easy peasy!
Other Parts Used:
-
Stephanie from CLINTON, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
21 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint screen and frame was torn up
Was initially going to order just the lint screen. Manufacturer notes said that there had been a redesign on that part so ordered all three pieces to ensure matching parts. On arrival it was just a matter of removing a few screws. Direct fit replacement!
Other Parts Used:
-
Clifford from HUNTINGTN BCH, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
16 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint filter and cover guide melted which was ripping up some clothes
Just unscrewed four screws. One piece stays behind which is a sensor then pull up on it, put it back in the same way, put the four screws back in and it was done.
Other Parts Used:
-
Kevin from FARMINGVILLE, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
15 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Former lint trap would catch clothes in dryer and rope them together
Pulled out old lint trap and installed new one in its place
Other Parts Used:
-
Brian from LOCKPORT, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
11 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
We needed a new lint filter and housing guide
My only issue was that I paid almost $30 for overnight shipping , and Part Select only sent two of the three pieces overnight. I had to wait several more days for the final piece. When I asked that they refund the expedited shipping charge, I never got a response. Would probably go with another company next time.
Other Parts Used:
-
Helen from FORT WORTH, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
11 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken filter and holder
I didn't get to do the repair because despite the model number and the picture being exactly what I needed I was shipped the wrong part and basically told by pets select to shake it off that's your problem not ours.
Other Parts Used:
-
Darryl from GOODYEAR, AZ
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
9 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint Screen Housing broke causing damage to clothing
Could not do repair since the parts that I ordered were different from the picture on this site. I have emailed them to which they replied with one email asking for some info. I sent that to them and have not heard anything back in the last 3 weeks. I have even sent reminder emails and still nothing. I can't use my dryer due to damaging clothing and can't replace parts due to being the wrong part. Partselect is not very good at getting answers for their customers. Expert repair help is something i don't think they have. Getting some answers would go a long way but i feel like i have been left in the dark.
Other Parts Used:
-
Steven from Kenduskeag, ME
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
8 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint filter and housing needed replacement
Parts did NOT fit together well. Because plastic, didn't want to force the pieces together and break them. Ended up calling appliance repair and even he had some difficulty getting it all together and back into the dryer.
Other Parts Used:
-
Catherine from LINCOLN, CA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lon
December 11, 2017
The removable lint filter has warped at one end and periodically can catch clothes as they spin. What part number(s) do I need to replace this filter. Looking at some posts it seems that depending on the model it's recommended you also replace other parts as well because of a redesign.
For model number DLEX2801R
Hi Lon, Thank you for the question. You will need to replace the filter, PartSelect Number PS3531962. They also suggest replacing the cover and the guide at the same time due to a redesign of the filter. Part # for Cover is PS3534930 and Guide is PS3535278. Hope this helps
41 people found this helpful.
Was this helpful?
Thank you for voting!
Daniel
October 9, 2017
I am trying to find a lint filter for my LG dryer, but when I looked for the above model number I got a message that said the one they listed would work with my dryer. Yes? Or no?
For model number DLEX3470V
Hello,
Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS3531962. They also suggest replacing the cover and the guide at the same time due to a redesign of the filter. Part # for Cover is PS3534930 and Guide is PS3535278.
Hope this helps!
22 people found this helpful.
Was this helpful?
Thank you for voting!
Loretta
March 7, 2018
I need a new dryer lint filter. What part # do I use? And do I need to buy new housing for this filter to fit dryer with s/no:604kwhx2m481?
For model number DLEX3370V
Hello Loretta, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS3531962 for the filter and as per manufacture due to a redesign you also have to change the cover and filter guide.Part # for Cover is PS3534930 and Guide is PS3535278.Good luck with the repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Dana Mumme
December 10, 2018
Hi..i want to purchase a new lint filter for my dryer. it says you have the part but i have to change the filter guide as well? is that something i need to purchase? i've had this dryer for at least 4-5 years. thank you.
For model number DLGX38762
Hello Dana, thank you for your question. Yes, the filter is part number ADQ56656401 and you do have to change the filter guide as LG has made changes to the filter and it need the corresponding filter cover and guide. The cover is part number MCK49049101 and the guide is MEA49050001. Please enter the part number into the site for current price and availability. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
ERNEST JR
October 23, 2017
The serial number on my dryer is sn904kwta00033. Will i need to replace anything else when replacing a warped lint filter?
For model number DLEX3001W
Hi Ernest Jr,
Thank you for your question. No, you should not need to replace anything else. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
November 5, 2017
I need a new lint filter (cracked) do i need a new filter guide the existing one is fine. What is the difference from the guide and cover?
For model number DLGX3371V
Hi Gary,
Thank you for your inquiry. I your filter guard is fine then you do not need to replace it. The guide is the part where the lint filter goes into and the cover provides protection for the filter. I hope this helps.
Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Will
January 3, 2018
I need to replace the lint filter (i believe part k310), but all of the replacement recommendations online have a different blocked corner on the lower corner. The original part is rounded on both lower corners. What part do i need to purchase to properly fit? Thx.
For model number DLEX3001R
Hi Will,
Thank you for your question. The lint filter listed under your model number is the correct part for you appliance and the lower corners of the lint filter have rounded edges. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
January 19, 2018
Looking to replace the lint filter because it’s damaged and it’s ripping clothes
For model number Kenmore 91382410 dryer
Hello Jeff, Thank you for your inquiry. This is the part number for the filter that is compatible to your model. Since it is a manufacturer update, you may also need the cover PS3534930 and filter guide PS3535278. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dennis Hoskins
January 26, 2018
I need part number for lint filter, drive belt, and drum rollers for LG dryer model dlex3360v s/n 009kwgg00863
For model number DLEX3360V
Hello Dennis, Thank you for your inquiry. The part number for the lint filter is ADQ56656401, the part number for the drive belt is 4400EL2001F, and for the drum rollers, the complete assembly with the shaft and retainers is part# 4581EL2002C, for just the roller the part number is 4581EL3001E. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Roxanne
December 4, 2017
I already ordered a part from seneca river and it was too wide. It looks like from description your part is exactly the same size?
For model number DLG3051W
Hi Roxanne, Thank you for the question. According to the model number provided,the lint filter is PartSelect Number PS3531962. As per manufacture - due to a redesign you may also have to change the cover and filter guide.If this filter is to wide for the cover and guide on your appliance now these parts will also have to be replaced. Part Number: PS3534930 and Part Number: PS3535278. Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- 3
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3531962
Manufacturer Part Number: ADQ56656401
Manufacturer Part Number: ADQ56656401
Brand
Model Number
Description