Part Location Diagram of 4386774 Whirlpool Refrigerator Front Roller Kit
See part 2 in the diagram
Replacing your Kenmore Refrigerator Refrigerator Front Roller Kit
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Refrigerator Front Roller Kit

$125.93
  Special Order
PartSelect Number PS370711
Manufacturer Part Number 4386774
Manufactured by Whirlpool
Product Description

Refrigerator Front Roller Kit Specifications

Support wheel assembly with bracket. Kit of 2.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Kenmore Refrigerator Refrigerator Front Roller Kit

Replacing your Kenmore Refrigerator Refrigerator Front Roller Kit
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Roper.
Part# 4386774 replaces these:
AP3107912, 585617, 1107882, 2152011, 2174748, 2174749, 2254628, 4317902, 4386774, 981127, 981128
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 8 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Front wheel was broken when moving refrigerator
Lifted the front up onto a scrap 2x4 to get it off the ground and it had 1 bolt that you removed to get the old item off and replace with new assymbly and 1 bolt to re attach. This sat broke for over a year becuase I thought it would be alot harder to fix, found the part on parts select ordered it recieved it in approx 2 days and had it fixed in less than 15 minutes. I would recommend parts select to anyone who told me that they had a appliance broken.
Thanks
Other Parts Used:
EveryDrop Water Filter
  • Jeff from Midway, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
525 of 553 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken front roller set and a snapped shelf support.
While moving our refrigerator when remodeling the kitchen, the front roller assembly shattered from age. The original set was made of nylon and age made it very fragile. Also to make the move easier, we removed the shelves. In the process the lower shelf support stud snapped.

When the parts came the first thing repaired was the shelve support stud. Very easy job to do, just take the pliers and rotate the broken stud counterclockwise a quarter turn and remove. Put new stud in the hole in the same position as the removed stud and gently, but firmly rotate the stud a quarter turn clockwise until it seats.

The front roller assembly requires a socket set, block of wood about 1/2 - 1" thick flashlight and 4’ level. First, remove the front grill by opening both doors of the side by side and pulling the grill out of its left and right side anchors. Close the doors. Place the block of wood under the front support near the center. Remove the leveling screw from the old assembly and install it loosely in the new assembly as the new assembly has no leveling screw. This will now allow you to remove the old assembly by removing the remaining screw in the roller assembly on the front refrigerator support and turning the roller assembly slightly counterclockwise and pulling out the front. You may have to wiggle it, as it sits in a slot on the side support of the refrigerator. To install, place the new assembly in the same position as the old, locate the slot with the flashlight and push the roller set tab into the slot. Attach the support screw and tighten while holding the assembly in place. It is a good idea to replace both rollers at the same time. The same rollers will fit both sides. Now level the refrigerator by tightening the leveling screw until the front rollers now touch the floor. Next, place the level on the top of the refrigerator diagonally but not on top of the door supports. Turn the leveling screws until the bubble is in the center when the level is set in either diagonal position. Replace grill and you done.
Other Parts Used:
Shelf Support Stud
  • Jerry from Fostoria, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
31 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Compressor making excessive noise
One front roller was flat on one side. Decided to replace all rollers at same time. Placed shims under unit and removed mounting screws for one front and one rear roller. With new rollers in place, I was able to level the refrigerator side to side, but unable to do so, front to back. Left the new front roller in place and reinstalled the old rear roller. Have decided to replace refrigeratorin the near future. This is one of my few repair failures!
Other Parts Used:
Rear Roller
  • chester from Tampa, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken wheel on leveling roller
I removed one bolt and took out the old roller after first blocking up the fridge. Then I was puzzled for a moment because the hole in the new assembly was not tapped. But then I saw that the old bolt was a self tapping bolt. I used it to tap the hole then removed it and installed the new assembly. No sweat job.
Other Parts Used:
  • Max from Jonesboro, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both front wheels were severly damaged needing replacement.
I tipped the refrigerator back and my friend used an adjustable wrench to attach put the new wheel assembies on. I also used a socket wrench to get the old attacheement bolts to thread. I rolled the cleaned appliance in place and adjusted the wheels with the socket set for easy door closing. It went smoothly.
Other Parts Used:
  • James from Leesburg, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set, Wrench (Adjustable)
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the front wheels was broken in half.
Very easy. Left the front of the refrigerator so it is approx. 4 inches of the floor. (used a two by four. Removed the screws (one for each roller). Removed the rollers and replaced with new rollers. Reinstalled the screws with secures the rollers to the refrigerator. Done
Other Parts Used:
  • John from INNSBROOK, MO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken wheel under fridge
Replaced both since they came as a set. The only way it could have been any easier is if I had the wife do it. She had the remote this time. (•¿•)
Other Parts Used:
  • Ted from Magnolia, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the front wheel broke
First I had to tilt the refrigerator on wood on the supports under the refrigerator, the wheels were easy to get to then I unscrewed the old ones and replaced them with the new better wheels. The old ones where plastic.
Other Parts Used:
  • Mary from Pelham, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hazel
March 28, 2019
Do the front wheels lock somehow? When we open the door the whole fridge rolls forward.
For model number 106.5175
PartSelect logo
Hi Hazel, Thank you for your question. There are no brakes for the rollers. If it is rolling forwards when you open the door, the refrigerator is likely not level and you will need to check and level it. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Don
February 28, 2022
I need to replace both front and rear wheels. The product page for the front wheels specifies they come in a kit of 2. I don't see any similar specification for the rear wheels. Do the rear wheels also come in a kit of 2, or are they sold singly?
For model number KSRL25FRSS00
PartSelect logo
Hello Don, Thank you for your inquiry. The specifications of the rear wheels listed under the part description state that they are sold individually. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Donald
February 28, 2022
i need both front and rear wheels. Front wheel kit indicates two wheels come in the purchase. The rear wheels appear to be sold individually, Is this correct? Do I need to order two?
For model number KSRL25SRSS00
PartSelect logo
Hello Donald, Thank you for your inquiry. We have researched the model number you have provided and confirm that the rear rollers are sold individually and you would need to order two. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Joseph
February 25, 2022
Regarding part #PS370711 which is the correct part for my front rollers though most list a different item…. I am looking for bolt/screw that goes into bottom hole (attaching it to refrigerator). Not sure the one in diagram is correct since it shows different roller
For model number ED5LVAXWS01
PartSelect logo
Hello Joseph, thank you for writing. The front roller is PS11738962. The screw that goes into bottom hole is PS11742746. We hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS370711
Manufacturer Part Number: 4386774
Brand
Model Number
Description
Kenmore
106106-8130600
Refrigerator
Kenmore
106106-8130610
Refrigerator
Kenmore
106106-8130620
Refrigerator
Kenmore
106106-8130630
Refrigerator
Kenmore
106106-8130640
Refrigerator
Kenmore
106106-8130650
Refrigerator
Kenmore
106106-8130660
Refrigerator
Kenmore
106106-8130680
Refrigerator
Kenmore
106106-8130690
Refrigerator
Kenmore
106106813067
Refrigerator - Kenmore 106.1068130670 Refrigerator
Kenmore
1061068130670
Refrigerator
Kenmore
1061068131
Refrigerator - Top-Mount Refrigerator
Kenmore
10641012100
Refrigerator
Kenmore
10641012101
Refrigerator
Kenmore
10641012104
Refrigerator
Kenmore
10641014100
Refrigerator
Kenmore
10641014101
Refrigerator
Kenmore
10641014104
Refrigerator
Kenmore
10641212100
Refrigerator
Kenmore
10641212101
Refrigerator
Kenmore
10641214100
Refrigerator
Kenmore
10641214101
Refrigerator
Kenmore
10641262800
Refrigerator
Kenmore
10641262801
Refrigerator
Kenmore
10641263800
Refrigerator
Kenmore
10641263801
Refrigerator
Kenmore
10641264800
Refrigerator
Kenmore
10641264801
Refrigerator
Kenmore
10641269800
Refrigerator
Kenmore
10641269801
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service