This is a drive belt for your washing machine. This part spins the basket in your appliance by connecting the drive motor to the drive system. You will need to replace the drive belt if your pumps are not spinning, your washer is not agitating, or you are noticing excess noise and/or a burning smell. This belt is black with six ribbings. To replace this part, you will need a Phillips screwdriver.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Washer Drive Belt - 6 ribs
Troubleshooting
This part fixes the following symptoms:
Spins slowly | Will not agitate | Burning smell
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Crosley.
Part# 134051000 replaces these:
AP2108082, 916708, 111700354, 131276300
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.3
Filter By Rating:
5 Stars
7
4 Stars
1
3 Stars
1
2 Stars
0
1 Star
1
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Carl B - April 26, 2023
Verified Purchase
Not required
The part I ordered was before I took the machine apart to diagnose. I ended up scrapping the machine and buying a new one. Have a brand new belt if anyone needs it.
★★★★★
★★★★★
William M - January 23, 2021
Verified Purchase
Good
OEM part, easy to install using video guidance Delivery was slow (10 days)
★★★★★
★★★★★
Brian R - May 10, 2020
Verified Purchase
Drive belt
The part worked well. The washer is now spinning
★★★★★
★★★★★
Paul J - November 3, 2019
Verified Purchase
Easy Repair!
Easy ordering & Part arrived fast! Great tip on video using the wire tire!
★★★★★
★★★★★
Robert A - April 30, 2019
Verified Purchase
Arrived too late
I had to purchase one from another supplier that provided next day delivery, yours was almost two weeks. Once stung twice shy
★★★★★
★★★★★
Jana M - March 29, 2019
Verified Purchase
Belt would not stay on.
We got the new drive belt on. But every time we rotate the drum, it slides off. No matter how many times we re-positioned / realigned the belt, this happened. Probably means the bearing is toast. Anyway, we got a new washing machine.
★★★★★
★★★★★
JANET E - March 13, 2019
Verified Purchase
easyrepair
the part great condition
★★★★★
★★★★★
Claude G - March 7, 2019
Verified Purchase
Right parts
Substitute part number work well as describe. Satisfied of delivery.
★★★★★
★★★★★
Mike V - August 15, 2018
Verified Purchase
Part is fine.
I have no issue with the part itself but I fear I have ordered the wrong one. It seems I do not need a belt. Is there a return policy?
★★★★★
★★★★★
Henrica C - August 5, 2018
Verified Purchase
easy repair, works great!
Came fast,just what I needed.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
motor burned out, tub quit going around
First I turned off the water and disconnected the hoses. I took off the back panel and unscrewed the 4 bolts holding the motor in place. The grounding screw was impossible to remove, so I had to cut the wire off. Took out motor and disconnected the electrical connector. Put new motor in (ordered new belt, figuring it would need replacing - was still in excellent shape, but replaced it anyway), bolted in the motor (socket set works best on further away bolts, screwdriver for closer ones). Put the belt on the motor first and then pulled it up over the side of the tub and turned the tub to get it around the whole tub - took alittle bit of turning to get it on. Plugged in electrical connector and screwed grounding wire into hole. Replaced back panel and water hoses. Got a bit dirty and sweaty but not too hard to do it yourself, as I am a 48 yr woman and don't usually do this kind of thing.
The only problem was that the drive belt was so tight that it was two inches short from the drive shaft making it very difficult to put on by hand.
I did my best to stretch the belt out and as I wrapped it around the pulley one hand was preventing the belt from slipping off and the other hand had the screwdriver to use as Leverage to stretch and slip the belt on the other side of the pulley. One thing that I saw but didn't try was to use zip ties to temporarily hold the belt in place so it didn't slip off that may have helped.
1. replaced (2) shocks, remove bottom cover 2. (1) spring and rib belt, used a wooden block to hold up drum , rolled out ld belt and rolled in new----remove top and rear covers after replaced same ---thanks..
Other Parts Used:
Alvin from Woodside, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
8 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door switch wouldn't allow machine to operate
disassembled cabinet to access, repl'ed switch with repl'mt sw. and harness provided. Instructions provided with repl'mt sw. made install very easy.
Pulled the back off and it was right there. Hardest part was to get the belt all the way around the drive wheel on the washer tub. Found out that it wasn't just the belt. It is the shock absorbers that probably broke the belt, even though the belt was probably well over 15 years old. The bouncing and banging because of the absorbers being bad probably had something to do with the belt eventually breaking. Now, we need to replace the shock absorbers.A big thing to remember about the belt install....clean the drive wheel real good!!!
Other Parts Used:
Christopher from CHARLEVOIX, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
September 12, 2017
I replaced the shocks on my washer and it still makes a loud noise when it's on the high spin cycle the model # is ftf530eso what else could the problem be
For model number FTF530ES0
Hi Gary,
Thank you for your inquiry. You may want to also check your belt and pulley as well. You could also take a look at your spider arm and your rear outer tub to see if those may be the parts that are causing your noise. I hope this helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Moises
November 10, 2017
How to fix the belt on the washer
For model number 417-42042100
Hi Moises,
Thank you for your question. We do have a general video that may help you with this installation. Here you are: https://youtu.be/5KFbBuscBVI . Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Ben
August 13, 2017
I can feel the motor running but no agitation. Pump runs. Is this a belt problem?
For model number sears washer 417-40042990
Hello Ben, that is a great question. Yes, if the motor is running and everything works but the tub wont agitate or spin it more than likely would be the belt. You can remove the back panel to inspect this. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Carl
August 26, 2019
Does this part fit the he machine
For model number WSXH208H1WW
Hi Carl, thank you for your question. It does not. According to your model number I have linked the correct part below for you. Good luck with your repair.
This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorous shaking during it's cycles.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS419285
Manufacturer Part Number: 134051000
