Part Location Diagram of 316075103 Frigidaire Oven Bake Element
See part 5 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Oven Bake Element

★★★★★
★★★★★
244 Reviews
$60.50
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS438018
Manufacturer Part Number 316075103
Manufactured by Frigidaire
Product Description

Oven Bake Element Specifications

The Oven Bake Element is a black, metal part which supplies heat to the oven. This element is 19-1/2" wide x 18-1/2" long and has 3-1/2" inserts. It is rated as "Easy" to install by users, and attaches to the bottom of the oven. If you notice visible damage, or that your oven is not receiving heat properly then it may be a problem with this part. Check your model number and user manual to see if this is the right part for you. It is important for you to disconnect your appliance from the power source before performing this repair. After disconnecting your appliance, remove the two screws/nuts connecting the old element, pull it out, and discard if faulty. Simply connect the new element prongs where the old element fit, and screw it back in. You may need a flashlight when making this repair.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly | Will Not Start
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Tappan, Kenmore, Crosley.
Part# 316075103 replaces these:
AP2125026, 09990062, 316075100, 316075102, 316075104, 316282600, 3203534, AP4356505, F83-455
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
244 Reviews
4.9
Filter By Rating:
  • 5 Stars
    223
  • 4 Stars
    16
  • 3 Stars
    2
  • 2 Stars
    1
  • 1 Star
    2
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 303 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Oven woudn't heat
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in.
Other Parts Used:
  • David from Shawnee, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1283 of 1361 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element cracked in two pieces
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the wires. Threw the old element pieces in the garbage. Connected the new element to the connecting wires and re-fastened the hex nuts. My husband had wanted to call the repair man, but it didn't look too difficult, so I decided to try it on my own. Boy was he surprised when I fixed it, and for a fraction of the cost of hiring a repairman! Ladies, we can do this ourselves!!! :) Thank you for being there for us to order our part from, Parts Select, we had our new part in less than 24 hours, so the shipping was blazing fast!!! Keep up the good work!!! :)
Other Parts Used:
  • Michael from Green Bay, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
813 of 918 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven did not heat
removed screws pulled element out. removed wire from old element replaced with new element.very easy
Other Parts Used:
  • jack from chambersburg, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
433 of 465 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heating element went out
My husband called our one and only parts store and got a price of $50 for the element. I used a search engine over the weekend and found the same thing for almost half the price. I received an email that said the element was shipped out on Monday, and it arrived on Tuesday afternoon! So my husband removed the two screws that hold the element in place, then replaced it with a new one. I am back in business for the holidays!
Other Parts Used:
  • LINDA from PERRYSBURG, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
201 of 276 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven's bake element had cracked and was no longer working.
The element is attached to the back of the oven by two small screws. After unplugging the electricity to the oven and removing the attaching screws with a socket set (6.5 mm), you are able to pull the element several inches out from the back of the oven. Doing so exposes where the wiring is connected to the ends of the baking element. The element disconnects from the wiring with a light tug, after which the new element can be connected. I leave the "real" fix-it jobs to the pros ... this was a simple repair that anyone can do.
Other Parts Used:
  • Brian from Marion, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
177 of 247 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven element burnt and broke into two pieces.
FIRST THING! UNPLUG THE OVEN! After I made sure there was no residual charge left in the oven I took a 1/4 inch socket wrench and attached to an interchangable screwdriver and crawled in the oven. I removed both screws and gently pulled on the element until the wire leads came thru. I then unplugged the leads and replaced the element with the new element and plugged them in. Then gently slipped the leads back into the oven and replaced the screws. Turned on the oven and WHA LA!! We had our oven back and running and had chocolate chips cookies in a flash! It was fast and easy and saved me a fortune!
Other Parts Used:
  • Denise from Fort Wayne, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench set
81 of 88 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower element burned into.
First thing I did was to turn off the range supply breaker. There were two screws, one on each side, that held the lower element into place. I used a phillips head screw driver to remove the screws and pulled the element out for access to the wires. I pulled the connectors off of the element and remove it from the oven. I them put the new element into place, attached the wires, replaced the screws and turned on the breaker. It was an easy fix.
Other Parts Used:
  • Richard from London, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
55 of 64 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bake element burned out/ no oven heat.
I removed the two element screws, one on each side. This was very easy and fast.
I then pulled the old element towards me about
three inches to expose the wires attached to each
end. The wires have a slide on terminal connector
so replacement is easy, but you must hold the
terminal connected to the wire then pull the element off. Do not try to pull off the element by pulling on the wire you can cause damage to the
wire and create a new problem. Once the old element was removed I attached the wires to the new element by sliding the terminal connectors on each end and pushed them firmly into place. I then pushed the new element back and replaced the screws on each side and the repair was complete.The repair took all of about 5 min. The best part was I received the the new element from Parts Express the next day and had the oven working within 24 hrs.. The repair service could not do it that fast. Do it yourself, you can save a lot of money!!
Other Parts Used:
  • Tom from Ridgefield, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
44 of 54 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower baking element would not heat up.
Your online instructions said to remove the two screws and pull out the heating element about 3 inches and disconnect. When I did this the element came out but not where it was connect to the wire., I could not locate the wire from the front of the oven. I then pulled out the oven from the built in cabinet and removed the rear panel. Then inserted the element with the 2 screws from the front and connect the wires to the element from the back of the oven. Jim
Other Parts Used:
LENS
  • Jim from Harrison, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
41 of 60 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
We notice a hot spot on the bake element while cooking and the next day the burner wouldn't heat.
First I unplugged the the stove. I then unscrewed the two screw holding the element. Because I had read the other repair reports on the site, I was very careful in pulling the element out so I wouldn't lose the wires in the rear of the stove.
Once out, I held them with the pliers and gently pulled the element until it was loose. Plugged in the new element screwed it back in and plugged in the oven. Worked like a charm. By the way the part arrived the day after ordering it!!!! This is a great site.
Other Parts Used:
  • Nancy from Barrington, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
39 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

71 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
January 2, 2019
I think it would be good to tell people to make sure the power is off
PartSelect logo
Hi William, thank you for contacting us. Yes, it is always best that before doing any repair you make sure your appliance is not connected to power so that you do not harm yourself or break something else on the appliance. Have a great day.

66 people found this helpful.

Was this helpful?
Thank you for voting!
Maureen
March 28, 2019
How to install heating element in bottom of oven?
For model number 79096010407
PartSelect logo
Hello Maureen, Thank you for the question. Here is a link to a How To video that may help. Good luck with the repair! https://www.youtube.com/watch?v=1E0VmuFtfXM

38 people found this helpful.

Was this helpful?
Thank you for voting!
Dustin
May 14, 2019
If my bottom heating element is broken can it cause the top part of the stove to not hear correctly
For model number TEF361GSB
PartSelect logo
Hello Dustin, thank you for your question. No, any oven issues shouldn't cause the top burners to be affected. The top burners are controlled by burner switches behind the temperature knobs and the oven control board and oven sensor control the oven elements and heating. I hope this helps.

19 people found this helpful.

Was this helpful?
Thank you for voting!
Ralph
May 22, 2019
Can you use the broil element for the bake element cause i don't use the broiler at al so would it work
For model number FEF326ABM
PartSelect logo
Hello Ralph, thank you for your question. Unfortunately, the broil element will not work for the bake element. To replace the bake element you would have to purchase PartSelect Number: PS438018. I hope this helps!

13 people found this helpful.

Was this helpful?
Thank you for voting!
Betty Justice
February 25, 2019
My bottom element heats fine. Since i purchased a new element some time back i have smut on my lower part of oven and on the element every time i cook something. I do not know what causes it. Will a new element help? Thank you.
For model number FEFL64FSD
PartSelect logo
Hello Betty, Thank you for contacting us. It is possible that the bake element is faulty. I suggest checking it with a multimeter. You should get a reading between 0-50 ohms. Good luck with your repair!

12 people found this helpful.

Was this helpful?
Thank you for voting!
Betty
February 6, 2019
Frigidaire oven element quick heating, so i know it needs to be replaced. My question is: Do i have the right model number to order a new one?
For model number FEF366EBE oven heat element
PartSelect logo
Hello Betty, Thank you for contacting us. After reviewing your model number I show PS438018 is the part number for the bake element for this model. Good luck with your repair!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Vanessa
May 29, 2019
My oven has a new bottom element but it still won't heat up
PartSelect logo
Hello Vanessa, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Darlene
April 12, 2019
Does this part work with this model
For model number FEF352AWE
PartSelect logo
Hello Darlene, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS438018. Thank you for your inquiry, good luck with this repair!

8 people found this helpful.

Was this helpful?
Thank you for voting!
John
June 6, 2019
I need both top and bottom elements bottom element is 15 inches long
For model number vf91725643
PartSelect logo
Hello John, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. vf91725643 looks to be a serial number. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Amy
April 1, 2019
Will this particular element work
For model number FFEF3003NWA
PartSelect logo
Hello Amy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS438018. Thank you for your inquiry, good luck with this repair!

6 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS438018
Manufacturer Part Number: 316075103
Brand
Model Number
Description
Frigidaire
00462048A
Range - Range
Frigidaire
00462048B
Range - Range
Frigidaire
00462048C
Range - Range
Frigidaire
00462048D
Range - Range
Frigidaire
20462052A
Range - Range
Frigidaire
20462052B
Range - Range
Frigidaire
20462052C
Range - Range
Tappan
30TESKWED-04-23
Range - Electric
Tappan
30TESKWED-23
Range - Electric
Tappan
30TESKWED-23-02
Range - Electric
Tappan
30TESKWED-23-03
Range - Electric
Tappan
30TESKWED1
Range - Electric
Tappan
30TESKWED2
Range - Electric
Tappan
30TESKWED3
Range - Electric
Tappan
30TESKWED4
Range - Electric
Tappan
31-1049-00-01
Range - Electric
Tappan
31-1049-00-02
Range - Electric
Tappan
31-1049-00-03
Range - Electric
Tappan
31-1049-00-04
Range - Electric
Tappan
31-1049-00-05
Range - Electric
Tappan
31-1049-00-06
Range - Electric
Tappan
31-1049-23-01
Range - Electric
Tappan
31-1049-23-02
Range - Electric
Tappan
31-1049-23-03
Range - Electric
Tappan
31-1049-23-04
Range - Electric
Tappan
31-1049-23-05
Range - Electric
Tappan
31-1049-23-06
Range - Electric
Tappan
31-2232-00-01
Range - Free Standing, Electric
Tappan
31-2232-00-02
Range - Free Standing, Electric
Tappan
31-2232-00-03
Range - Free Standing, Electric
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service