Product Description
Upper Crisper Drawer Cover - Glass NOT Included Specifications
This cover holds up the top crisper drawer, and has drawer glides molded in it. This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides molded into the frame but this part does not include the glass cover. To replace this part, lift out the glass cover and snap out the drawer frame. Snap this new frame cover into place and replace the glass.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Westinghouse.
Part# 240350702 replaces these:
AP2115959, 917224, 240350702, 240350701
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Tanya C - 27 days ago
Verified Purchase
Not the part I wanted
Didn’t know where to put this on the star scale, as this is likely a misunderstanding on my part - but also the descriptions on these items aren’t great. Technically I guess you can consider this the upper crisper drawer part, but then what are we calling the very top drawer???? In this model fridge you have a total of three drawers - this piece is the top of the middle drawer, NOT the very top drawer which I guess we don’t consider a crisper. In the photo my finger is on the piece that came.
Graziano J - June 22, 2024
Verified Purchase
Great
Should of ordered long time age, used duck tape with the old one ??
Pam R - November 5, 2022
Verified Purchase
Shelf replacement
Arrived quickly and was the correct part. I like that you had a fridge schematic so I could identify the part I needed. Thankyou
San L - November 4, 2022
Verified Purchase
Great part
The part was in good condition and came fast.
Vijai D - September 30, 2021
Verified Purchase
Easy repair, was very easy to replace
The part was in good condition and it arrived pretty fast considering the present pandemic.
Janusz K - August 19, 2021
Verified Purchase
Works
Brand new
Derrick T - June 20, 2021
Verified Purchase
Fast delivery easy to install
I ordered the part and it was delivered in about a week and it fit perfectly in the fridge. This is the second time I have ordered parts from Part Select and both times if was great service.
Jose Nestor G - June 9, 2021
Verified Purchase
Great Part - No Issues reinstalling it
The part I received is a 100% match of what I asked for. No issues installing it Great Service!!!
Dolores Q - February 16, 2020
Verified Purchase
Part worked well but the online manual is confusing - call before you order
I did my best to study the online manual before I ordered the fridge shelf. No dice. I ordered the wrong part and it cost me $50!! to send it back. That is the reason for the 3 stars. The right part is a 5 star. I called to go through the manual with someone on the phone to figure out the right part. You would have to be a rocket scientist to figure it out from the manual. Lots of diagrams, NO measurements so you don't really know if the part will fit. The right part is great. Do yourself a favour and call before ordering. Save yourself some time and money.
Victor Z - February 27, 2019
Verified Purchase
Fast delivery, no problems what so ever.
Good vendor.
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 32 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Aged parts broken
After sitting in a cold refrigerator for year after year, plastic becomes brittle and breaks. This is what started happening to my shelves and door bins. The problem a lot of times is getting the right part since some of the parts do not have numbers.
This website gives a accurate description and best of all photos on an inch grid, so I can measure what I have and find what I need. This time everything was perfect and fit easily. took no time and just like that I have almost double the space again. Funny how that works. Once before I didn't get the right piece so just pay attention to the dimensions.
This website gives a accurate description and best of all photos on an inch grid, so I can measure what I have and find what I need. This time everything was perfect and fit easily. took no time and just like that I have almost double the space again. Funny how that works. Once before I didn't get the right piece so just pay attention to the dimensions.
Other Parts Used:
-
Erik from Evans, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
716 of 755 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
had broken sheves on the doors and the crisper drawers weren't suported
The only difficult aspect of the job was getting the old shelf support stud removed from the refrigerator wall - the support was broken off too short to allow vise grips to hold it. I had to use two screwdrivers to get under and then pop out the stud to the point I could get the pliers to hold. Everything eles pretty much just "fell together" very easily.
Other Parts Used:
-
Fred from Plano, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
214 of 398 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Upper Crisper Drawer Cover cracked in the Front
Simply replaced the drawer cover (frame) of that shelf. Removed crisper drawer, removed glass shelf, removed frame, placed new frame in, then glass, then drawer. Very easy.
Other Parts Used:
-
LAUREN from MADERA, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
45 of 48 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Guides damaged, crisper pan cracked
1.Got on line to Partselect ordered the parts we needed .they arrived Quickly and in good condition 2.Except the tray was sent in error delaying the repair. 3.contacted Partselect costumer services for assistance 4.Followed their direction and reorder the correct one hoping the correct one would arrive .it did the next day .5.On to repair, removed broken stud with panel stud puller with the aide of a putty knife to spread the pressure of tool stud came out 6.reinserted new stud 7.replaced the new upper crisper drawer cover glass not included . 8.Upper Crisper pan to complete the repair. 9.all in all successful with the help of Partselect superior parts and helpful guides.
Other Parts Used:
-
Darin from Nicholasville, KY
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
25 of 43 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken plastic guides on both crisper drawer covers. Upper crisper pan broken. Broken supports.
Remove both crisper pans and covers. Discard old frames and re-use glasses. Use two screw drivers to gently pry out broken supports. Top broken off smooth on one support. Unable to grasp with pliers to pull out. I drilled a small hole in the center of the large expansion pin. I screwed in a small sheet metal screw. Used side cutter pliers to grasp screw and gently rock back and forth to remove center of large pin. Plucked out broken pieces with needle nosed pliers. Gently tap in expansion pins to install new supports. The rest is simple re-assembly using new parts. "Nothing to it but to do it."
Other Parts Used:
-
John from JASPER, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
23 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
simple
put 4 screws in door handle everythings else just slides into place. took less than 10 min. frig look new again.
Other Parts Used:
-
Kimberly from Baton Rouge, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
13 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken shelf support studs and crisper drawer cover.
No problem, I Just pushed the plastic pin to the old support studs into the frig wall using a small screw driver and hammer and with pliers pulled the studs out to the wall of the frig being careful not to damage the wall. Then with pliers {needle nose} pulled the plastic pin out of the wall. Pushed the new support studs in the hole and tapped the plastic pin with a small hammer into the support stud. Replaced crisper drawer cover and glass shelf. Easy fix
Other Parts Used:
-
Timothy from Mount Wolf, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
11 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shelf broken
Ordered a new shelf which arrived very fast. Installed in no time at all as it just slides in and rests on brackets. No tools needed and the new part looks just like the original.
Other Parts Used:
-
Matthew from Shawnee, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
9 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The frame for the upper crisper drawer cover was cracked.
So simple! I just slid the drawer out of the old frame, inserted it in the new one, and added the glass cover.
Other Parts Used:
-
Nina from Deerfield Beach, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
7 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
THE CRISPERD DRAWER SLIDE WAS BROKEN.
REMOVED THE DRAWER, LIFTED OFF THE GLASS, REMOVED THE BROKEN SLIDE, AND PLACED THE NEW SLIDE IN THE PROPER SPACE. REPLCED THE GLASS SHELF TOP AND THE DRAWER. PEICE OF CAKE
Other Parts Used:
-
Dee from BELLE HAVEN, VA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
February 24, 2018
I need an upper crisper shelf frame replacement. I searched the number on the part (240350700) and a part did come up as a close match (240350702) but the original part number was not on the cross-reference chart listed with the replacement part. Will this still be a properly fitting replacement or is there no longer a replacement part available?
For model number FRS26KF6EBC
Hello Jim,
Thanks for your question. Yes, this part is a replacement to the former 240350700, and will fit your model.
I hope this helps.
24 people found this helpful.
Was this helpful?
Thank you for voting!
Dwayne
December 9, 2017
What are the dimensions for this part ? I am needing the crisper drawer cover that measures 16 1/2 wide and 19 1/2 deep that holds the glass
For model number FFHS2611LWF
Hello Dwayne, Thank you for your inquiry. We show that the size should be approximately SIZE 19 1/2 inches by 16.9 inches. Hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Rik
February 11, 2018
Your team just answered my question on getting a piece of glass for my friend's refrigerator. They said the part is PS645378. Now can you give me a size measurement? Is it tempered glass?
Hello Rik,
Thanks for your question. The glass measures approximately 17.25" x 15.5". It is made of tempered glass.
I hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Bill
May 22, 2019
Shelf part # is 2403507. Holds the second crisper from the bottom. Do you have this part #. Thanks.
Hello Bill, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Alfredo
November 6, 2019
What are the dimensions for this product?
For model number 240350702
Hi Alfredo,
Thank you for your question. The dimensions of the upper crisper drawer cover are approximately 17 inches by 20 inches. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Doc
April 18, 2018
I can't find the replacement shelving for my Frigidaire crisper drawers. My part numbers on the pieces say 240350900 and 2403507. I can't find them on your site. Are there replacements with different part numbers?
For model number PLHS269ZDB7
Hi Doc,
Thank you for your question. Yes, if you look at your diagram for your shelves there are 4 parts that make up your shelves. The frames and the glass come separately from each other. I have linked all the parts down below for you. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Melissa
March 24, 2020
The top shelf of three broke in the middle. Please advise what part we need to order. When i looed it up, the picture the part it says we need looks different than the shelf we have. The back of ours has what appears to be vents. Thanks for your help
For model number FFSS2615TSO
Hi Melissa,
Thank you for your question. If the top shelf that holds the snack or meat pan has broken, the part number for it is PS2363832. To place an order for the part you may order it either online, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. We hope this helps. Thank you and have a great day.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Starrfire
August 26, 2021
I need 4 items for 2017 Frigidaire side by side model #FFHS2611PFEA. 1. Upper crisper unit (don't need glass) number on that is ps 240350700 { all I see on website is 240350702}. 2. The larger crisper drawer I don't see any numbers with that. 3.Glass for bottom crisper unit. The plastic shelf # 2403509. 4. Door shelf PS2421266 rt 140279
For model number FFHS2611PFEA
Hello StarrFire, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2361214 for the Upper Crisper Drawer. PartSelect Number PS430022 for the Lower Crisper Drawer and the cover that goes over the Lower Crisper, PartSelect Number PS2361213 does not come with a glass insert. The Upper Door Bin for the Fresh Food door is PartSelect Number PS430121 and the Lower bin is PartSelect Number PS429724. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Rayna
November 16, 2021
what are the measurements of the frame for the top crisper drawer
Hi Rayna,
Thank you for your question. The dimensions of the crisper frame are approximately 20 inches by 17 inches. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dale
November 22, 2021
Where the 2nd Drawer guides are molded to the frame bracket that is the 2nd bottom drawer frame that sits over 4 plastic knobmounted to the bracket that the glass sets in?s to hols drawer and shelf. My question are the slide guides permantlly mounted to the frame that holds the glass? Thanks
For model number CRSE266FWO
Hello Dale, Thank you for your inquiry. We are showing that the drawer glides for the upper crisper drawer second from the bottom are molded to the frame that holds the glass. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS648823
Manufacturer Part Number: 240350702
Manufacturer Part Number: 240350702
Brand
Model Number
Description