Timer Knob - Dryer
$94.95
Special Order
PartSelect Number
PS755794
Manufacturer Part Number
WE01X10160
Manufactured by
GE
Product Description
Timer Knob - Dryer Specifications
Used with washer/dryer combo machines. This knob takes a D-shaped shaft.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer Dryer Combo, Washer.
This part works with the following products:
General Electric.
Part# WE01X10160 replaces these:
AP3207448, 943810, WE01X10160, WE01X10069, WE01X10070, WE1X10069, WE1X10070, WE1X10160
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Control knob had broken and we were unable to set the dryer
I first ordered the replacement knob. It had broken before and I had repaired using a steel washer and epoxy to support the cracked plastic. When the support system I installed broke, I suspected a deeper problem; increased resistance to knob rotation in the control system. I removed the front panel to get back at the switch area. I wanted to lubricate the whole control, but UT seemed to be well sealed. Finding a couple areas where the plastic came together, held by a permanent metal mount, I used a pressurized silicone lubricant and sprayed into the small spaces. That allowed for easier rotation of the control, hopefully giving a longer lifespan to the new knob. DO
Other Parts Used:
-
Dave from Salt Lake City, UT
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
11 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The knob broke on my dryer
I just put the new knob on! It was simple! Took less than a minute.
Other Parts Used:
-
Elizabeth from Northville, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
9 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Remove the old replace the new knob
Remove the old knob place the new knob in it's place.
Other Parts Used:
-
Glenn from CHICAGO, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Could not use dryer time knob so could not dry clothes
Merely replaced the knob
Other Parts Used:
-
Carroll from Rockaway, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The knob that came with the unit was broken
I took the serial and model # off the appliance, located it on your site, purchased it and it was sent within 2 days. Thanks! I think the old one was a defective one because it never worked.
Other Parts Used:
-
Keelyn from Old Greenwich, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
August 26, 2017
My dryer knob has a d-shaped shaft. Do i just replace the new knob over the shaft and that it?
For model number we01x10160
Hi John,
Thank you for your inquiry. Yes, if this the correct timer knob for your appliance than you should be able to remove the old knob and replace it with the new knob. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Joanne
May 20, 2019
Timer knob for upper dryer broken. Can you suggest which part is correct? Difficult to tell from all the knobs shown and model numbers don't correspond with mine. Serial number mf601146w. Thanks.
For model number WSM27TCDWWW
Hello Joanne, thank you for inquiring. For your model the replacement Timer Knob is part PS9863559.
Was this helpful?
Thank you for voting!
Charlotte
January 28, 2020
The dryer knob broke and I need a replacement. There are three numbers on the inside of the knob: Kip 5804, Kip 5807 & 1318591. Serial number LM603654W (06/07)
For model number WSM2700HAWWW
Hi Charlotte,
Thank you for your question. The part number listed under your model number for the dryer timer knob is PS755794. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
Andrea
February 19, 2020
The dryer knob broke and i need a replacement.
For model number WSM2700HBWW
Hello Andrea, thank you for your question. The dryer timer knob is PartSelect Number: PS755794 for this unit. The smaller rotary knobs for this unit are PartSelect Number: PS755793. I hope this helps.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS755794
Manufacturer Part Number: WE01X10160
Manufacturer Part Number: WE01X10160
Brand
Model Number
Description