We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patrick
November 13, 2019
Washer will not spin or agitate. How can i test the motor to see if it is the problem?
For model number WHDSR315D5WW
Hello Patrick, thank you for your question. There will be to wire leads connected to the motor. Disconnect the motor's two wire leads from the wiring harness. Set your multimeter to the R x 1 setting. Touch each of the meter's probes to one terminal each. Your motor should show little resistance (a reading of zero, or close to zero). Now check the ground connection. Place one probe on the bare metal housing of the motor. Place the other probe on each terminal, one at a time. You should not receive any reading on your meter from this test. If your washer's motor fails either of these tests, you will have to replace it. The transmission is also a possibility for why this would occur. I hope this helps.
Was this helpful?
Thank you for voting!
Todd
January 25, 2018
How do I find a spec for the motor to test for proper resistance with multimeter? The motor is overheating, so it may be the transmission and not the motor.
For model number WHDSR315D5WW
Hello Todd,
Thanks for your question. There will be to wire leads connected to the motor. Disconnect the motor's two wire leads from the wiring harness. Set your multimeter to the R x 1 setting. Touch each of the meter's probes to one terminal each. Your motor should show little resistance (a reading of zero, or close to zero).
Now check the ground connection. Place one probe on the bare metal housing of the motor. Place the other probe on each terminal, one at a time. You should not receive any reading on your meter from this test.
If your washer's motor fails either of these tests, you will have to replace it. The transmission is also a possibility for why this would occur.
I hope this helps.
Hi. My washer won’t finish the whole cycle. It left the clothes so wet and won’t spin to dry. Pls help. Is this the part i should get?
For model number WH20X10019
Hi Maggie,
Thank you for your question. If the cycle on your washer is not completing the issue could be the timer or the lid switch. You will need to check the parts with a multimeter to see which one is causing the issue. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Jeannie
February 27, 2019
Washer don't spin or agitate
For model number WBB6700F0GG
Hi Jeannie,
Thank you for your question. If the washer is not spinning or draining, there are some parts that you will need to check to see which one is causing the issue. You will need to check the agitator coupling kit, the agitator, the drive belt, the tub dampening strap, the split ring, the capacitor, the transmission and brake assembly, the hub washer, the tub bearing washer, the tub seal, the magnet assembly and the lid switch. I hope this helps. Thank you and have a great day!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS756764
Manufacturer Part Number: WH20X10019
