Part Location Diagram of 137221600 Frigidaire Drain Pump - 120V 60  Hz.
See part F35 in the diagram
Replacing your Frigidaire Washer Drain Pump - 120V 60  Hz.
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Drain Pump - 120V 60 Hz.

 Fits your FEX831CS0!
★★★★★
★★★★★
19 Reviews
$220.77
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your FEX831CS0!
PartSelect Number PS7783938
Manufacturer Part Number 137221600
Manufactured by Frigidaire
Product Description

Drain Pump - 120V 60 Hz. Specifications

The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Washer Drain Pump - 120V 60 Hz.

Replacing your Frigidaire Washer Drain Pump - 120V 60  Hz.
Troubleshooting
This part fixes the following symptoms:
Will not drain | Leaking | Not draining
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Westinghouse, Kenmore, Crosley.
Part# 137221600 replaces these:
AP5684706, 2754548, 137221600, 134051200, 134740500, 137108100, 137151800, 137151800KITK
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
19 Reviews
4.9
Filter By Rating:
  • 5 Stars
    18
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 3.7 / 5.0, 21 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
would't spin all water out or rinse out clothes
uplugged washer took front off washer 2 screws pryed up top pump was mounted with 2 screws and 2 wires took off found change in pump and the fins to pump worn off ordered part off line the wait for part was longer than the amount of time to fix problem and cost of part saved me about $25-35 if I was to buy local worth wait save money and fix problem washes like new spins and drains all water from tub.
Other Parts Used:
  • kenneth from willard, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
167 of 204 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
After a full cycle the washer would not drain the water
After reading the possiblilities of problem, I determined that the drain pump was not working; therefore I ordered a new one. When I opened the washer to replace the part, I found out that the pump was working but the filter was stuffed with pieces of rubber that came out from a rug I washed. Once all the stuff was removed, the washer worked just fine. PartSelect was very gracious to accept the returned with not questions asked!! Thanks partSelect.
Other Parts Used:
  • sara from North Miami, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
84 of 93 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
pump very noisy, failing.
Disconnect water and electricity.
Shop-vac out the water in the internal drain hose.
Remove back cover, tip washer on side to gain access.
Un-clamp rubber drain hose,unscrew pump and remove.
Cleanout filter cup (yuk!) find coins and hairpins.
Attach drain hose to new pump and re-install with hose clamps from hardware store because spring clamps were impossible (arthritis in fingers).
Reconnect water and electricity.
Test for leaks and tighten clamps if necessary.
Other Parts Used:
  • John from Mason, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
51 of 55 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
discharge of water out of wash machine
remove side panel & start rinse cycle & heard a grinding noise in discharge pump. used a bucket to catch water upon removeal of discharge hose to pump. unplug disconnect plug to motor, remove pump from unit. Discovered propeller was loose in housing. Googled Partselect.com, odered part & in 2 days later installed new pump on unit. Started a load of wash & it has been working perfect ever since. thanks to PartSelect.com for the service, the repair was minimal & easy for the DO IT YOURSELFER. Bill Starry
Other Parts Used:
  • William from York Springs, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
26 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washer would not drain
After removing the front of the washer, I used slip joint pliers for the hose clamps, then a screwdriver for the mount bolts and replaced the pump motor in reverse order. The pump was ordered on line on a Friday before 10am and was delivered on saturday moring by FedEx. I could not have expected such fast and efficent service!
Great Job!!
Other Parts Used:
  • Harry from Zephyrhills, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
24 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water not draining
It turned out that the pump was fine. There is a filter within the rubber bellows between the washer drum and the motor. You need to remove the entire bellows to get to it. Just remove the motor and you can un-clip the hose tensioners. They are exactly like the ones you would fine on most foreign cars - just compress with pliers and move back on the hose. Clean out the plastic filter. A small nail had worked its way through the plastic filter and lodged in the motor impeller. Removing this nail and reassembling, it all worked as new! I kept the pump and motor as a future spare rather than return it.
Other Parts Used:
  • Harold from Denver, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
22 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water pump broke
My Husband did the repair it took less than 15 minutes. He popped the front off the washer. He then unscrewed two screws and removed the pump assembly. He popped the new pump in, and put in the tow screws. Then he put the washer front back on replacing two screws. It took all of five minutes. I am so pleased it was so easy. I told him next time I'd do the repair and he could watch!
Lil
Other Parts Used:
  • Lili from Jamestwn, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
22 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Machine would not spin.
Once I figured out that it would not spin because it did not drain. Unplug machine and remove the back pannel. Locate the drain pump on the bottom of machine. Remove the power wires and the screws holding it to the bottom. Then use a pliers to remove the hose clamps ( was easer for me to tip the machine forward ). Be prepaired to catch or soak up extra water from lines. The hardest part to the install is the limited room you have to work with. Install screws to hold the pump in place then install water lines, power wires and back pannel. Only thing left is to plug it in and watch for leaks.
Other Parts Used:
  • Jeff from Weyauwega, WI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
20 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tub wouldn't drain
First I removed the front panel,then set the timer to run. It began the drain,spin cycle, pump ran, but no water went out. Shop-vac the water out,removed hoses from pump,took out mounting screws from base, unplug pump plug. check hoses for debris since they're open, the impeller was broken. ordered the part . Mount the pump to the base, put the hoses on, plug in motor and replace front panel. plug into wall
Other Parts Used:
  • Brian from Murfreesboro, TN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
19 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Flooded Floor
First I took sides off the washer. I then took screws out of the Drain pump holder. Unclamped the two pipes from it. Undid the wires to then drain pump. Screw in the new pump hardware. Plugged in the wires on side of the pump. Reclamped the pipes. Put sides back on washer and it worked. That easy and took less then 30 minutes. I am no handy man so thats how easty it was.
Other Parts Used:
  • Matthew from Weyers Cave, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
18 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

31 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rachel
December 11, 2017
The washing machine is re-filling with dirty water slowly after spinning. The solenoid valve was replaced but didn't fix issue. If spin cycle w/no spin, only drain is used afterwards all the water remains ejected and doesn't return. Does this mean an issue in pump or can we simply replace the red flapper/check valve? Thank you
For model number LTF6700FS0
PartSelect logo
Hi Rachel, Thank you for the question.The red flapper is more then likely the issue but is not sold separate from the pump so the pump will need to be replaced. Good luck with the repair!

13 people found this helpful.

Was this helpful?
Thank you for voting!
Andrew
February 21, 2018
The washer is not draining completely. When we go to start it back up again the door locks, the lights come on, but then the lights will go out a few seconds later, and the machine switches off. Unable to drain the water, and i am unable to use the system at all. Any ideas?
For model number ATF6700FE2
PartSelect logo
Hi Andrew, Thank you for your question. There are a few parts that you should check. First check your drain tubes and pump filter to make sure there are no obstructions. Secondly, you should check your door lock to make sure it is working correctly. It also may be your drain pump that is giving you the issue as well, so it would be good to check that part. I hope that helps. Good luck with your repair.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Tim
January 10, 2018
The washer makes it through all cycles except the last or final spin cycle at the 12 minute mark starts briefly and about the 6 minute mark just stops and shuts off clothes are still very wet. What would be the issue?
For model number ATF7000FS0
PartSelect logo
Hi Tim, Thank you for your question. If the timer is not advancing beyond the final spin cycle, you will need to check the timer, the door lock and switch assembly and the shock absorber kit. I hope this helps. Thank you and have a great day!

7 people found this helpful.

Was this helpful?
Thank you for voting!
CECILIA
August 12, 2017
I am trying to attach a new pump to a front-loading washer and had no problem removing the damaged one but can't manage to attach the new one because no room to get my hands in to turn screws. Is there any way to remove the front panel on this machine?
For model number GLTF2940FE1
PartSelect logo
Hi Cecilia, Thank you for your inquiry. You should have had to remove your front panel to get to the part. If you take a look at this part information you will see an installation video that will show you how to remove the front panel to get to the part. Good luck with your repair.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Ed
January 22, 2018
When I tried to start my washer, it sounds as if it is starting but the drain pump started and then it stops. It makes a terrible sound. The whole unit still hums. I was not sure if this was a pump problem or if the door lock was not locking. Any ideas?
For model number GLTF2940ES3
PartSelect logo
Hello Ed, Thanks for your question. You may want to check the impeller to see if anything managed to get clogged inside. If not, try testing the drain pump and the door switch with a multimeter to see if they have continuity. Replace either of them if they are not showing continuity. I hope this helps.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Howard
September 8, 2017
I push the start button the pump starts after a few seconds the washer shuts down.
For model number 41744052400
PartSelect logo
Hi Howard, Thank you for your inquiry. There are a couple of parts that could cause that issue but I think that the part you will want to check first is the door lock switch. Sometimes when your machine will pump water but will not continue into the cycle, the lock had failed and the machine thinks that the door is open. I hope this helps. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Allistair
April 4, 2019
Machine would wash but after some time it would stop during the cycle and then after some time you would hear a click sound and then the cycle starts again. This will continue for the entire washing and it makes washing longer than it should be. What could possibly be the problem?
For model number FEX831CS0
PartSelect logo
Hello Allistair, Thank you for the question. This sounds like the Timer Switch, PartSelect Number PS418697 is not processing through the cycles properly and will need to be replaced. Thank you for your inquiry, good luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Akil
October 7, 2017
Clicking sound when turning the cycle tuner and the water won't drain. What part would i need?
For model number FWS777GHS0
PartSelect logo
Hi Akil, Thank you for your inquiry. If you are selecting a cycle and the timer is clicking you need to check the timer. If the washer is not draining there are some parts that you will need to check to see which one is causing the issue. You will need to check the drain pump, the drive belt, the drain hose and the lid strike. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Lorna
April 25, 2018
How to replace timer for wash cycles?
For model number FFLG1011MW0
PartSelect logo
Hi Lorna, Thank you for your question. Unfortunately we do not have any installation information for your model or part. However here is a video that will show you how an installation of a switch on a washer usually goes: https://youtu.be/iA1aTEyFIjM. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Gary Emmerick
April 27, 2018
I have water spraying out under washer,and when it starts to wash it's making a load squeaking noise
For model number FAHE1011mwo
PartSelect logo
Hello Gary, thank you for your question. Open the access panel to see if a hose has come loose or if the water is coming from the drain pump or sump. With the loud noise you're having it is most likely the drain pump that has failed and will have to be replaced. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS7783938
Manufacturer Part Number: 137221600
Brand
Model Number
Description
Kenmore
41744052400
Washer
Kenmore
41744052401
Washer
Kenmore
41744052500
Washer
Kenmore
41744082400
Washer
Kenmore
41744082500
Washer
Kenmore
41744092500
Washer
Kenmore
41744152400
Washer
Kenmore
41744152401
Washer
Kenmore
41744152500
Washer
Kenmore
41744252500
Washer
Kenmore
41744252501
Washer
Kenmore
41748102700
Washer
Kenmore
41748102701
Washer
Kenmore
41748106700
Washer
Kenmore
41748112700
Washer
Kenmore
41748112701
Washer
Kenmore
41748116700
Washer
Kenmore
41790802992
Washer Dryer Combo
Kenmore
41790812992
Washer Dryer Combo
Kenmore
41790814002
Washer Dryer Combo
Kenmore
41790862992
Washer Dryer Combo
Kenmore
41790872992
Washer Dryer Combo
Kenmore
41791702001
Washer Dryer Combo
Kenmore
41792702200
Washer Dryer Combo
Kenmore
41793702200
Washer Dryer Combo
Kenmore
41793702201
Washer Dryer Combo
Kenmore
41793802200
Washer Dryer Combo
Kenmore
41793802201
Washer Dryer Combo
Kenmore
41793812200
Washer Dryer Combo
Kenmore
41793812201
Washer Dryer Combo
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service