Part Location Diagram of W10613606 Whirlpool Compressor Start Device and Capacitor
See part 1 in the diagram
Replacing your Amana Refrigerator Compressor Start Device and Capacitor
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Compressor Start Device and Capacitor

 Fits your MFD2560HES!
★★★★★
★★★★★
14 Reviews
$96.53
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your MFD2560HES!
PartSelect Number PS8746522
Manufacturer Part Number W10613606
Manufactured by Whirlpool
Product Description

Compressor Start Device and Capacitor Specifications

This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Amana Refrigerator Compressor Start Device and Capacitor

Replacing your Amana Refrigerator Compressor Start Device and Capacitor
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Fridge too warm | Fridge and Freezer are too warm | Freezer section too warm
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
Amana, Kenmore, Maytag, Whirlpool.
Part# W10613606 replaces these:
AP5787784, 14217273, 67003186, 67003764, 67005560, 67005561, 67005562, 8171210, 8208290, 8208368, C8931605, W10416065, W10613606VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
14 Reviews
4.8
Filter By Rating:
  • 5 Stars
    11
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 21 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The compressor would not run.
I removed the screws in the lower back panel where the compressor is located. Then I unplugged the capacitor and plugged the new one in. I then checked to see if the compressor would start. It wouldn't so I replaced the overload relay with capacitor and that fixed the problem. The capacitor just plugs into the relay then plugs into the compressor. There are several screws but all in all it is easy.
Other Parts Used:
Run Capacitor
  • Gilbert from Clinton, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
325 of 371 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer cold, refrigerator warm
Overload relay accessible from back, by compressor unit. Very easy to change out. Diagram from your site placed defrost thermostat in same area.It wasn't. Found another diagram, showed it in refrigerator light area, took that apart, not there. Yet another diagram showed it in the duct work area at back of refrigerator cabinet. Not there. Finally removed back of freezer compartment, found thermistor and thermostat with the fins. Clipped wires, wired in parts, quick fix. Longest amount of time was spent finding the old parts to replace them. Actual replacement took less than 15 minutes. Refrigerator holding at 35 degrees set on 2 now, better than ever. Total cost, less than $120, doing iy ourselves....priceless.
Other Parts Used:
Defrost Thermostat Thermistor
  • Gordon from Ben Wheeler, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
178 of 283 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Frig not cold at all,Freezer was all defrosted
Well the frist thing I did was get out the all the paper work and look under trouble shooting.This frig has a list of codes to try to help narrow down what parts might be bad.Well at frist it seemed it was a Defrost Thermastat?Well thanks to PartSelect it showed me right where it was and step by step how to remove and replace it.It took me over 2Hr's,after that I let the frig run all night and the next morning(yep warm frig)not the part I needed,well now Im mad,the local part store said you need a 3in1 jump starter easy to in stall at $50.Can'nt bring parts back no way weather thier opened or not.So get home and can'nt see how this jumper is going to wire up to my compresser?So on to the Web site to get some info,find out that this part gets a thumb's down,it puts out more volt's then needed and kills your compresser the reviews where very help full.So back to PartSelect to see more info,then I spoted the Overload/Relay and went to the back of my Frig and this part just plugs right into the compresser,I pulled it of with pliers and Bingo a burn spot melted right through the Overload/Relay.Ordered the right part the same as the old one.Put the part in and Bam,compresser fired right up.If I only did alittle more home work I could off saved alot of head ach and money.Thanks PartSelect I'll alway's click on to your web site for future parts and advise.
Other Parts Used:
  • Denise from SOUTHINGTON, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
64 of 70 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Compressor Locked up.
This is not a repair Job for just any body to do unless you have had some Refrigeration training and some experience !

I have been Certified and Licensed on refrigeration systems small, large and very large
for the past 36 years
Other Parts Used:
Refrigerator Water Filter Compressor Kit
  • Edmond K. from Las Vegas, NV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
48 of 119 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
compressor clicking but not turning on
I just opened up the fridge back panel accessed the old relay/capacitor, pulled it out, replaced with the new one, snapped it back into place, tested it (compressor came on), replaced the back panel and went on my way. Really, really easy repair.
Other Parts Used:
  • brice from irving, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
45 of 55 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator stopped cooling
Problem: My Maytag side by side door refrigerator just stopped cooling and has to discard all frozen items after I discovered being away for 3 days. First, I went to my computer and read some of the repair stories at Part Select “Need help with your repair?” and installation video guide.
1. I ordered the Refrigerator Adaptive Defrost Board (ADP) - followed the procedures how to disconnect and installed the new part. Unfortunately, it did not correct the problem and only warm is coming out.
2. I ordered the Defrost Heater Thermostat Assembly - removed the old and replaced with new assembly. Again, warm air coming out. Meanwhile, I kept on hearing “clicking sound every few second” not knowing where this coming from. Again, at Part Select, I read the story about it and I ordered the
Run Capacitor and the Overload/Relay with Capacitor. Soon as I opened the parts and tried to match it from the part at the back of the refrigerator and to the part from the compressor, I have discovered that they are not in compatible with the original parts from my Maytag Refrigerator and cannot be installed. And so I contacted (Email) Part Select customer service (Jeanette) if I could return the unused parts and had provided me the “Return address and the Reference Number”. This time, I gave Jeanette the Maytag Model and Serial numbers and asked where I could find this on my refrigerator and make the necessary repair and came back with the diagram and located #4 to the compressor. Ordered the correct part# PS2004058.
3. Upon receipt of the part above, I was puzzled, in the plastic container are four parts, included a plastic cover. I have not given up, I removed the original part encased in white plastic container pulled straight off the compressor and examined it closely. Before detaching all the wiring, I also noted before disconnecting from wire harness and read the Diagram/Instruction Sheet provided.
4. From the four new parts provided, installed the Overload Terminal, bottom part on Compressor with one terminal to the Blue wire. Connected White Jumper to the old harness. Lastly, I plugged the PTC Start Device (two terminals) above the Overload Terminal on the Compressor with the proper wiring as I previously noted and installed the electrical cover. “Plugged in the refrigerator to the power outlet”. To test the result, I left a glass of water inside the freezer and a bottle of wine into the refrigerator. The result - I checked after 2 hours, the water was frozen and a cool wine. “Little frustration included here, as I am not an electrician.” But now, I could say, I fixed it, and very proud of this accomplishment.
Thank You, PartSelect and to a great Customer Support!
Safety Note: Always make sure to unplugged the refrigerator (power off) prior doing the necessary repairs.
Rodolfo Julao/S. San Francisco, CA
Other Parts Used:
Run Capacitor
  • Rodolfo from South San Francisco, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
40 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator was not getting cold
For the defrost control board, it is a really easy replacement on my model Maytag refrigerator, all you have to do locate the freezer/refrig, cooling controls in the main part of frig and remove the control knobs by pulling them of by hand, for the cover use 1/4 socket with a socket wrench or socket screw driver to remove the cover, after that you will see a panel cover that you have to unclip by hand and that is where your control board is located and at this point it's just plug and play. just reassemble in reverse order. I changed my overload relaywith start capaciter out also when I changed my defrost control board. To change the relay out, first remove the lower panel on the rear base of the frig. and this is where you will find the relay pluged into the round black compressor, simply unplug the old and plug the new in, it's just that simple!
Other Parts Used:
Defrost Control Board
  • Eugene from Bakersfield, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set
28 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The compressor would try to start,but would not.
I pulled the whole unit(condenser&overload relay)
with my hand & disconnected the wire connected
to it & Replaced it with the new one.Peace of cake.
Other Parts Used:
  • Alfred from Port Charlotte, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
18 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
failed compressor
Recovered refrigerant, removed compressor. Replaced compressor and evacuated system. Charged system with R134a. Works like charm.
Other Parts Used:
Compressor Kit
  • B.J. from Dillingham, AK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
16 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no cooling either fridge or freezer
Refrigerator was stored for about 2 years and we picked it up when the owner decided to move into an apartment and no longer needed to unit (lost home to foreclosure). Brought the unit home and it worked great for about 3 days. On the third day my wife noticed a slight electrical burning smell. I did also and quickly emptied the unit and hoped for the best. The unit did indeed stop working. I fancy myself a do it myselfer but I would normally not go near electricity but thought what the heck it was free if i ruin it I would give it away. After a little research i found Partselect and they had a great design and a few stories that sounded similar so i pulled the relay capacitor for the compressor and sure enough the unit showed burn marks where the unit had shorted out. Maybe a bug got in there or water, dirt but I ordered the part. I arrived in two days which was great. I installed the part and plug the unit in and crossed my fingers. Very happily the unit clicked on and has been running great ever since. thanks Partselect, while I may not be one of your big customers I will refer anyone with appliance issues to your site first.
Other Parts Used:
  • chad from stockton, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
15 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

27 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bret
December 7, 2017
How do you test run start relay
PartSelect logo
Hi Bret, Thank you for your question. You would test that part with a multi meter. The start relay should read any where between 10 - 100 ohms of resistance. Good luck with your repair.

20 people found this helpful.

Was this helpful?
Thank you for voting!
Dave
August 26, 2017
Can this part be bad and the freezer still maintain a constant temp while the fridge is to warm? I have replaced the thermistor and the control damper and fridge still will not maintain a constant temp. When i unplug and plug it back in the fridge will cool back down for a short period of time. But its like when the temp rises and it calls for it to start cooling again it doesn't. Any help greatly appreciated.
For model number JFC2089HPR10
PartSelect logo
Hello Dave, thank you for contacting us. If the freezer is staying at its proper temp but the fridge is not, that could be the an issue with the evaporator fan or motor. That is what blows the cool air into the fridge. Hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Russ
October 11, 2017
Fridge+freezer warm both fans running replaced capacitor and start device. Still compressor not kicking on
For model number mbf1956keb2
PartSelect logo
Hi Russ, Thank you for the question. I recommend replacing the Electronic Control Board,PartSelect Number PS11755733.The electronic control board is used in refrigerators to monitor and manage the temperature settings, such as cooling or defrosting times. If your fridge or freezer is too warm, too cold, is not defrosting, will not start, and/or runs too long then replacing the control board could solve your appliance problem.Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Gary
October 31, 2019
Is there an internal fuse or power board -have power to frige but nothing works
For model number pbf1951hew
PartSelect logo
Hello Gary, Thank you for the question. There is no fuse or board, but I suggest testing the Compressor Start Device and Capacitor PartSelect Number PS8746522 with a multi meter. This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Donna Suchan
March 8, 2018
My refrigerator makes large ticking noises like a clock, then starts making loud popping sounds, the lights start to blink on the front and then goes out. The noise continues and then stops, the lights come back on the refrigerator returns to normal running. I have turned the ice maker off thinking that was maybe hanging up but it is not the problem. At first this happened once in awhile but now it does it somedays more than once a day.
For model number ME12568AEW
PartSelect logo
Hi Donna, Thank you for your question. If your are hearing a ticking or clicking noise from your appliance, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the compressor start device and capacitor and the high voltage board. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Chloe
August 1, 2018
I am not getting power to the compressor how can i test the run cap. And start relay? Where the cap plugs into the compressor it's got a little heat damage melted a little.
For model number MSD2652KGB
PartSelect logo
Hi Chloe, Thank you for your question. You would test those parts with a multi meter to determine whether or not they are working. When testing, if either part is not reading 0 ohms, that means they would have to be replaced. I hope that helps. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
David
November 15, 2018
The power on the house was turned off when power came back on the refrigerator comes on, blows ,but doesn't cool lol what do i check first please
For model number Aff2534few11
PartSelect logo
Hello David, Thank you for the question. The first part to check would be the Thermistor, PartSelect Number PS2003772. You can test the Thermistor to see if it is defective.The resistance of the thermistor in the unit should be 2.7K ohms at 77 degrees.Hope this helps, good luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Robert Merchinson
December 17, 2018
My refrigerator is not getting cold lsd
For model number Lsd2615heb
PartSelect logo
Hello Robert, thank you for your question. If the freezer is working but the fridge is getting too warm, you will want to check to see if the evaporator fan motor is working to push cold air to the fridge from the freezer, as well as the damper is opening and closing to allow more or less air in. You may also want to check that the coils behind the freezer wall are not frosting over, if they are you may need the defrost control board. If the freezer is also too warm and not cooling enough, the start device and capacitor on the compressor. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Ronald
March 21, 2019
Frig, making groaning noises, when it is running! Just cleaned the compressor fan and back bottom section of frig! Front bottom section is next! The groaning is coming from inside of frig! Evap fan? Or something else? Any que?
For model number MF12568AEB
PartSelect logo
Hello Ronald, thank you for your question. If the noise is coming from inside the fridge when its running we would recommend checking the evaporator fan motor and blade first. If that isn't the issue you may want to check the damper assembly. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Colleen
August 5, 2019
I am looking for the capacitor relay combo for this model. Thanks
For model number 596.65932401
PartSelect logo
Hello Colleen, thank you for inquiring. This Compressor Start Device and Capacitor part number PS8746522 is the replacement you are looking for on your model. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8746522
Manufacturer Part Number: W10613606
Brand
Model Number
Description
Amana
1999A
Refrigerator
Amana
1999A-P1193906WL
Refrigerator - SIDE BY SIDE REFRIGERATOR
Amana
1999W
Refrigerator
Amana
1999W-P1193906WW
Refrigerator - SIDE BY SIDE REFRIGERATOR
Amana
2599A
Refrigerator
Amana
2599A-P1190419WL
Refrigerator - SIDE BY SIDE REFRIGERATOR
Amana
2599W
Refrigerator
Amana
2599W-P1190419WW
Refrigerator - SIDE BY SIDE REFRIGERATOR
Litton
35271
Refrigerator
Amana
35271-P1121805W
Refrigerator - REFRIGERATOR
Amana
35271W-P1121805WW
Refrigerator - 20, 25, & 27 CUBIC FOOT SIDE BY SIDE ICE AND WATER
Litton
35278
Refrigerator
Amana
35278-P1121806W
Refrigerator - REFRIGERATOR
Amana
35278L-P1121806WL
Refrigerator - 20, 25, & 27 CUBIC FOOT SIDE BY SIDE ICE AND WATER
Litton
35501
Refrigerator
Amana
35501-P1121711W
Refrigerator - REFRIGERATOR
Amana
35501W-P1121711WW
Refrigerator - 20, 25, & 27 CUBIC FOOT SIDE BY SIDE ICE AND WATER
Litton
35508
Refrigerator
Amana
35508-P1121712W
Refrigerator - REFRIGERATOR
Amana
35508L-P1121712WL
Refrigerator - 20, 25, & 27 CUBIC FOOT SIDE BY SIDE ICE AND WATER
Litton
35541
Refrigerator
Amana
35541-P1121709W
Refrigerator - REFRIGERATOR
Amana
35541W-P1121709WW
Refrigerator - 20, 25, & 27 CUBIC FOOT SIDE BY SIDE ICE AND WATER
Litton
35548
Refrigerator
Amana
35548-P1121710W
Refrigerator - REFRIGERATOR
Amana
35548L-P1121710WL
Refrigerator - 20, 25, & 27 CUBIC FOOT SIDE BY SIDE ICE AND WATER
Litton
36051
Refrigerator
Amana
36051-P1122003W
Refrigerator - REFRIGERATOR
Amana
36051W-P1122003WW
Refrigerator - 20, 25, & 27 CUBIC FOOT SIDE BY SIDE ICE AND WATER
Litton
36058
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service