This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Dishwasher Water Inlet Valve
Troubleshooting
This part fixes the following symptoms:
Leaking | Will not fill with water | Not cleaning dishes properly | Noisy
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Moeez M - February 8, 2024
Verified Purchase
Worked as expected and solved the leakage
Part was delivered within 24hrs of ordering. Worked as expected and fixed the water leak I was experiencing. Dishwasher is in working order now.
★★★★★
★★★★★
TIMOTHY B - March 26, 2023
Verified Purchase
Fill valve
Woman on the phone was very helpful. Although the part was a different shape she explained that it was a new configuration. It worked great - no more leak
★★★★★
★★★★★
Alaa S - January 27, 2021
Verified Purchase
Excellent service
The part shipped same day and arrived next day. Direct replacement for original part. Was packaged in a small box with no rapping or bag. two mounting screws were not provided. I would certainly recommend for fast replacement parts.
★★★★★
★★★★★
Rolanda P - October 16, 2020
Verified Purchase
Easy Repair
This is the second time we have used PartSelect. We are 100% satisfied with the excellent service. PartSelect helps one to find the problem, recommended fix/part and prompt and efficient delivery of the part. They have videos that are so easy to follow. And they include the video with your invoice. Awesome service! Thank you!
★★★★★
★★★★★
Wayne D - June 10, 2020
Verified Purchase
The repair went well. the part was as required
service was faster than expected. had to sort out the electrical component ie remove one piece to fit the the configuration I had but no big deal...Thanks
★★★★★
★★★★★
Richard B - April 14, 2020
Verified Purchase
Perfect replacement for Kemore 665.1374* series dishwashers.
Direct plug 'n' play replacement. Easy job. Simpler if you pull the machine out from the cabinet and lay it down on its back.
★★★★★
★★★★★
Mel D - March 19, 2020
Verified Purchase
Dishwasher water valve
The part was exactly what I needed, and with the help of the instructions provided and on-line I was able to complete the repair. Everything is fine now. Thank you.
★★★★★
★★★★★
Joan D - November 3, 2019
Verified Purchase
Dishwasher needed new water inlet valve
The part has been installed & works great !!
★★★★★
★★★★★
Marc R - October 13, 2019
Verified Purchase
Very easy repair, part arrived faster than I anticipated
Worked just as ordered, watched a small video and got started. About 15 mins later up and running
★★★★★
★★★★★
Kevin K - September 13, 2019
Verified Purchase
Didn't help.
Ordered 2 parts and received only 1. I called and they shipped the missing part next day, great service. I later received the missing part again, now I have 2 that I don't need.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
washer filled in when off..
replaced the valve
Other Parts Used:
Bruce from GRANDVIEW, MO
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
9 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking water inlet valve
I closed the water at the tank and opened all the hot water faucets in the house thereby draining static water from the inlet hose at the valve. Then I unscrewed the inlet hose from the valve, unscrewed the valve body from the support bracket under the tub, unplugged the electrical plug from the valve body, and removed the outlet hose. I installed the new valve using the reverse sequence. Then I closed all the hot water faucets, turned on the hot water at the tank, and purged air from each of the faucets. I then started the dishwasher and ran it through a complete cycle, periodically checking it for leaks, and found none. Total time for uninstall and reinstall - about 30 minutes. Not bad for an 80 year old.
Other Parts Used:
Fredrick from BROADALBIN, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pin hole leak in valve body.
Kill power to unit. Turn off water supply. Remove front access panel. Remove screw holding valve housing. Remove valve. Disconnect water lines. Replace valve in housing. Reconnect water lines with addition of thread tape. Reinstall valve and housing.
Other Parts Used:
Robert from COOKEVILLE, TN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Whining noise from dishwasher when filling and leaking around overflow valve
Unplugged dishwasher and turned off water supply. Removed bottom panel. Put rag under valve and unscrewed water inlet. Used ratchet and socket to remove screw from valve. Disconnected wires. Disconnected outlet. Installed new valve opposite of disassembly. Turned water back on. Plugged in and checked for leaks. Test ran.
Other Parts Used:
Stephen from BRECKENRIDGE, MN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
researched whirlpool and online resources for NO WATER IN DISHWASHER
Thanks to all the people who video their repairs and such. Found the part number from whirlpool online resource then ask you tube for video of anyone who had this issue with this part and video taped their repair. Found video then went online to see where can I purchase this part. I chose Part Select. The part came in within a few days. Went back to video and watched as I replaced the part. Not one issue came up. If only all issues in life could be solved so easily.
Other Parts Used:
michael from ALLENTOWN, NJ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench (Adjustable)
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
11 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
November 6, 2018
Our washer makes a noise when filling. Is this the inlet valve or some thing other
For model number GU2275XTVY1
Hello Robert, Thank you for the question. If the noise is only happening as it fills, the water valve may be defective. Thank you for your inquiry, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
November 21, 2019
Hi,
Thanks for responding to my question. As per your instructions, I checked the water inlet valve resistance and it shows 1018 ohms. Let me know your thoughts.
For model number 66513112K701
Hi Ron,
Thank you for your question. If you are not getting a reading of infinity, then the water inlet valve is fine. If you get a reading infinity, then you will need to replace the part. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tim
January 16, 2020
After wash cycle and all dishes removed and door shut again, the water continues to fill the reservoir and then overfills and begins leaking while shut off? Is this result of bad water inlet valve or something else?
For model number 665.13213k901
Hi Tim, thank you for your question. It is likely your water inlet valve. You can test it electrically with a multi meter. It should be reading between 500 - 1500 ohms of resistance. You may also need to check it physically to make sure that the solenoid is not physically stuck open. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bill
February 4, 2020
Hi, thanks for all the help over the years! Presently my dishwasher seems to be short a couple litres of water anytime it fills causing a surging noise. What do you think is the most likely culprit? Thanks
For model number iud9500wx2
Hello and thank you for writing.
It certainly sounds like it could be a faulty water inlet valve PS8760080 and/or possibly a malfunctioning float switch (kit) PS557009 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance. We glad we could help in the past and looking forward to continuing doing so. Thank you.
I only need the brass attachment of the Inlet valve as it is leaking. Is it possible to only order this as opposed to the whole inlet valve. If so, could you please let me know how much it is and how to order it. Thank you
For model number KUDS50FVSS3
Hello Vito, Thank you for the question. The Brass fittings for the valve are only sold as part of the Valve assembly. Whirlpool does not sell the Brass Fittings on their own. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ed
January 8, 2019
If dishwasher fills for a consistent duration each time i start cycle (56 seconds), but fails to fill up and thus doesn't clean dishes, is the likely cause: Water inlet valve, clogged screen on water inlet valve, or float switch?
For model number DU1301XTVQ2
Hello Ed, thank you for your question. If the unit is not filling, the most likely cause is the water valve. This part can be easily tested with an ohm meter. The other part that it could be is the float switch, which can also be tested for continuity with an ohm meter. I hope this helps!
Was this helpful?
Thank you for voting!
Sharon
January 10, 2018
Dishwasher won't fill with water. We replaced the water inlet valve and it started working again, but a week later will not fill with water? Could part be defective?
For model number kude70cvss3
Hi Sharon, Thank you for the question. It is possible the valve is defective.If there is power coming to the water valve and you are getting no water, you will need to replace the valve on the unit. You can test to see if it is getting power with a multi-meter. Hope this helps!
Was this helpful?
Thank you for voting!
Ron
November 21, 2019
Halfway through the filling cycle my dishwasher stops sending water and starts the washing cycle. There is not enough water in the base so the upper shelf is not getting enough water to clean the dishes on the shelf. Why the water flow is shutting off in the middle. I appreciate your response.
For model number 66513112K701
Hi Ron, thank you for your question. The first part to check for an issue like this would be your water inlet valve. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is fine then you may want to look into your float switch being the problem. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
WAYNE
June 22, 2023
The old water valve assembly no. is W10195049 (301C101T) and the new part received has a number of W108665472 T-3 (131C23). The electrical connection on the existing washer does not fit the new valve. Do you have the right part? The serial no. on the dishwasher is F04601165.
For model number GU3000XTX01
Hi Wayne, thank you for reaching out. According to our research, the water inlet valve for your model GU3000XTXQ1 is part number PS8760080. We hope this helps!
Was this helpful?
Thank you for voting!
Vincent
April 12, 2019
Is this part returnable
For model number w10648041
Hi Vincent,
Thank you for your question. We have a 30 day return policy. Here is a link to our policy, https://www.partselect.com/Thirty-Day-Returns.htm. I hope this helps. Thank you and have a great day!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8760080
Manufacturer Part Number: W10648041
