Product Description
Bellow with Clamp Specifications
Also known as the door boot seal. This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub to move separately from the door during the spin cycle.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Washer Bellow with Clamp
Troubleshooting
This part fixes the following symptoms:
Leaking | Marks left on clothes
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Crosley.
Part# 5303937187 replaces these:
AP3672603, 1038491, 131277100, 131783300, 134177600, 5303321641, 5303937140
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Franciscus T - May 11, 2021
Verified Purchase
Difficult install.
It was impossible to install with the machine upright but when I tipped it back 45 degrees it was difficult but possible. Works fine, successful repair.
Franck G - June 22, 2020
Verified Purchase
works a expected
fontionne bien installation facile 40 min
Paul F - October 30, 2018
Verified Purchase
Perfect replacement
Carbon copy of the part I needed to replace. Comes with paper instructions, but the video is definitely recommended. Not an easy repair, be prepared to persevere.
Jean D - August 30, 2018
Verified Purchase
Great service !
I did not need this part because I bought a new washer ,I returned the part.This was very easy to do because of the quick and courteous service I received,thanks again,parts select.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.5 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The rubber boot on our front loading washing mashine was torn and needed replacing to stop the leaking water.
The instructions were good, but putting the spring on was quite difficult. The 3 spacers that came with the boot didn't want to stay in place. Finally I got 2 c clamps, putting a clamp over the spring and rubber spacer, and that did the trick. without the c clamps it would have been extremely difficult to get that spring on. Now it's fixed and no more leaks.
Other Parts Used:
-
Durr from Mulino, OR
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
73 of 113 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front Door on Washer leaking
I bought this as much for the instructions as for the part...as I wasn't sure how to get a spring back around the bellows. The instructions were good, however I found that the spring went on best when I had two sets of hands - one set holding the spring in place (with a metal tool to make sure it didn't slip - as the rubber spacer didn't do the job) , and the other hand guiding the spring around the rest of the bellow. Also, when putting the metal clamp back around the water inlet area, I didn't have 3/8" soft copper tube on hand, so I used a couple of other tools to get the metal pieces to wrap around eachother. Also, leaning the washer back on the wall helped make room for my hands to get into the machine and do the work.
Other Parts Used:
-
Jason from Austin, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers
59 of 82 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joseph
June 27, 2019
My model has the bellows that is glued in place. Is that the only difference? And what kind of glue do i use?Thanks
joseph
For model number 411.40042990
Hello Joseph, thank you for your question. If the old bellow was glued on the new bellow can be used with the clamps and retainers and does not have to be glued on. The new bellow comes with a spring clamp that will hold the bellow in place. Please see our installation video online for help with this repair! I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Lindsay
December 30, 2019
Would this be compatible with Kenmore washer model 970 c47062 00. According to the parts list i need part #134177600. Thank you!
For model number 970-c47062-00
Hi Lindsay, this part is fully compatible with your model. Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Shara
April 16, 2018
Hi. I bought a bellow but it didn’t come with a clamp. Can I buy one separately?
For model number GLTF1670AS0
Hello Shara, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS417377. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Leo Fritschen
March 1, 2018
How do you replace the front door seal or bellows on then Frigidaire stackable washer?
For model number FAFW3801LW
Hi Leo,
Thank you for your question. There is a video listed with the part on our website that you may reference on how to install it. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gina
March 19, 2023
The Kenmore boot was glued on. Boot doesn’t appear to need replacing. What type of glue would I need to re-glue or outer clamp to keep it from moving? Much appreciate!
For model number 417.42042100
Hello Gina, thank you for your question. The glue is no longer used. When replacing the bellow, the new one comes with a clamp PS900237. We also have a video for your view for installation information. We hope to hear from you soon.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Candace
September 12, 2022
Will this this fit Electrolux model LTF530FS0? Does it include everything needed?
For model number LTF530FS0
Hello Candace, thank you for your question. The Bellow with Clamp, part number PS900237, will fit your model. If you have any follow-up queries please feel free to reach out to customer service, we are available seven days a week. Glad to be of help!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS900237
Manufacturer Part Number: 5303937187
Manufacturer Part Number: 5303937187
Brand
Model Number
Description