Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
March 10, 2020
Hi do i need a door latch with the part i’m ordering ( door latch actuator) for my Whirlpool microwave?
For model number WMH31017AS4
Hi Jim, thank you for your question. You would only need it if it is also broken. Otherwise you should be able to reuse the part that you have there. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gene
December 21, 2023
Does the cam plate fit both the upper and lower interlocks? My lower cam has the keeper tang broken off so that often when the door is shut the interior light cycles (chatters) on and off.
For model number UMV1160CS3
Hello Gene, thank you for your inquiry. The cam-plate, part number PS9491943, fits both the upper and lower interlock supports. Glad to be of help!
Was this helpful?
Thank you for voting!
Ken
March 8, 2024
I was thinking of installing a new cam plate, (W10562613), in our microwave and maybe also a new interlock support. But two interlock supports are shown and the page indicates one is in the drawing as #12 and the other #12a, but no 12a is shown on the drawing. The one: called top interlock support is one price and the other one is called jus interlock support and it is a different price. I want the one for the bottom switch. Let me know.
For model number MMV4206FW0
Hi Ken, thank you for getting in touch. The interlock support you are looking for is part number PS11749178. Customer service is available 7 days a week if you need help placing an order!
This door interlock switch is for microwaves.
Door interlock switch prevents the microwave from starting when the door is open.
Because the microwave shielding and interlock switches must be properly tested followi...
This three-terminal switch fits your microwave door. This part is mostly black in color and is about 1.5 inches with metal terminals. You might need to replace this part if your microwave is not heating properly or if it...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS9491943
Manufacturer Part Number: W10562613
