Part Location Diagram of WR02X12008 GE Evaporator Fan Grommet - Red
See part 615 in the diagram
Replacing your General Electric Refrigerator Evaporator Fan Grommet - Red
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Evaporator Fan Grommet - Red

★★★★★
★★★★★
4 Reviews
$16.79
  Special Order
PartSelect Number PS963756
Manufacturer Part Number WR02X12008
Manufactured by GE
Product Description

Evaporator Fan Grommet - Red Specifications

This evaporator fan grommet is red in color, and is about 1 inch in diameter.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Refrigerator Evaporator Fan Grommet - Red

Replacing your General Electric Refrigerator Evaporator Fan Grommet - Red
Troubleshooting
This part fixes the following symptoms:
Noisy | Fridge too warm | Clicking sound | Freezer section too warm
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WR02X12008 replaces these:
AP3795810, 1091586, WR02X10519, WR2X10519
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
5.0
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 29 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
evaporator fan making lots of noise
the repair was really easy!!! took longer to put the little clip on the fan part than it was to install the whole moter and put everthing back together

save money do it yourself.....
Other Parts Used:
Evaporator Fan Blade Evaporator Fan Motor
  • alex from rohnert park, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
120 of 144 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
freezer and ice maker worked fine but bottom(cooler)did not cool innoff .Freezer compartment was also forming a lot of ice all over. l
Removed covers on the freezer compartment to gain access to the evaporator fan motor.The motor was turning but not fast innoff to move air true tthe evaporator coil.The evaporator fan it is the one that will cool the bottom and top of your refrigerator.
Other Parts Used:
Evaporator Fan Blade Evaporator Fan Motor Compression Ring Lid Bumper
  • Israel from Concord, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
62 of 94 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator fan was very noisy and we started to notice frost on our food in the freezer.
I should state first that I am a DIYer and have no experience fixing appliances. The fan noise seems to be a common problem. It has something to do with the bearings. Mine was actually hitting the housing in front on the fan as well. Getting into the installation, I knew I had to take the back panel and fan housing off. But I found out that everything needs to come off. This is the ice maker, the housing underneath the ice maker as well as the fan housing and back panel. This isn't difficult but good to know before hand. A quick note, the light bulb housings come out by pulling them forward. It's a good idea to label the screws as you take them out as there are quite a few that need to come out. I replaced the evaporator fan the fan blade and one grommet. In hind sight I should have replaced both grommets as they both showed wear. They are both exactly the same so you can order two of the above. All in all this is a pretty easy fix. It takes a bit of time, but it's not to difficult. Th most difficult thing was the wiring. The fan comes with a six prong connector and has four prongs taken up. There is, what I think is a temperature sensor, that takes up the other two prongs. Since I didn't order that part, I had to cut it out of the old connector and insert it into the new evaporator fan connector. This was a bit difficult and would have been much easier if I had ordered the part. Unfortunately, I don't know what that part is called, but it must be some kind of temperature sensor as it clips on the coil. The wires also run through a blue rubber wire-run that needs to be sliced open. This was pretty easy to do with a small serrated pocket knife. SLice it on the back side of it and pull the old wires out. When you are ready to install, just run the new wires through the hole from the old wires. Once you have replaced the fan the new blade and the two new grommets, it's just a matter of replacing all the equipment. Fan housing first, then the upper housing followed by the ice maker and the back panel. Good luck
Other Parts Used:
EVAPORATOR FAN BLADE Evaporator Fan Motor
  • Jon from Fenton, MO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Socket set
56 of 74 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
High Pitch Noise from the Evaporartor Fan
Firt Removed the Ice Maker Tray and the full ice maker assembly. Removed the plastic shroud that sits over the fan assembly. Since the original connector (or the plug)for the motor had also a temperature sensor attached to it and did not know how to remove and trabsfer to the new motor connector I spliced the new motor to the old connector. It was fairly straight forward. Overall the job was not that difficult and since I was trying to be more meticulous it took a little longer. An average person can do it in around 30 to 45 minutes.
Other Parts Used:
EVAPORATOR FAN BLADE Evaporator Fan Motor Compression Ring Lid Bumper
  • Murtaza from E. Amhurst, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
53 of 78 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
loud whinning noise of fan in freezer section
1. content of freezer was put in an ice box
2. panel covering rear of freezer compartment was removed, a few screws
3. old fan now accessible was removed an new fan mounted.
4. modular wiring plug broke, wires had to be soldered and wrapped in heat shrunk insulation
5. compartment was cleaned an rear inside panel closed

Thanks for all those who shared their experience and the schematics available on website. It gave me the confidence to to this myself. Its my second repair in freezer (previous being a defective heater)
Other Parts Used:
Evaporator Fan Blade Evaporator Fan Motor Compression Ring Lid Bumper
  • Daniel from MIAMI, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
41 of 70 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
noise fan
Took off the back panel 4 screws, 2 screws on fan motar ,unpluged fan and replaced fan motor ,Hardest part of the whole job was setting the fan blade ,easy to push on but becarefull not to push it on to far.check distance on old fan before you take the blade off.
Other Parts Used:
Evaporator Fan Blade Evaporator Fan Motor
  • Richard from Port st Lucie, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
38 of 41 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer making loud humming noise.
Followed instructions per video and took roughly 45mins. Super easy and saved you time from having to hire someone and money. Highly recommend do it yourself.
Other Parts Used:
Evaporator Fan Motor
  • Mark from ROCHESTER, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
37 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud freezer fan motor
Removed old worn out freezer fan motor and replaced with a new one. Piece of cake. Sooo easy and saved money too!
Other Parts Used:
Evaporator Fan Motor
  • William from GENEVA, OH
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
21 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bearing chatter and slow running fan motor
assembled ordered parts then replaced defective fan and blade and bracket as a group
Other Parts Used:
Evaporator Fan Blade Evaporator Fan Motor EVAPORATOR FAN FRONT BRACKET
  • Michael from Kalamazoo, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator fan motor died
It has been my experience that these motors sometimes die when the refrigerator is overfilled and motor strains to keep refrigerator cold. And this motor is used in several models of refrigerators. That said, sometimes the hook-up is slightly different between other units. The available video is good, but like I said, circumstances will be slightly different between various models.

After cleaning out freezer (plug disconnected first), start to remove outer plastic covers. If you want to keep track of the different steps, you can take pictures with your cellphone. And if there are any connecting wire attachments you think you might not remember, again, you can take a picture, or label with tape (colored tape, or by writing on the tape). And for keeping track of the different-size screws, I place them in a muffin tin, keeping an order of left to right and top to bottom in the tin. When removing Styrofoam blocks in bottom center, make sure you remove any remaining ice underneath in the hole so refrigerator can "breathe". Freezer air is moved below to refrigerator compartment, so a blocked vent hole will strain refrigerator as it tries to maintain its temperature setting and can be the cause of your failed motor.

After replacing motor onto bracket with grommets and blade, don't completely tighten. Position plastic cover with hole opening over motor and blade assembly. Twirl motor blade to see if there is any interference with cover. If not, take away cover and tighten motor on bracket. If there is any rubbing, adjust motor/blade assembly accordingly before tightening in place. Putting everything back together is in reverse order.
Other Parts Used:
Evaporator Fan Motor Evaporator Fan Blade
  • Kevin A. from CONCORD, NH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

13 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Terry
December 30, 2017
At times we hear a whirring sound that is not smooth. It seems to go slow then faster then will slow down again (never did this before, quite noticeable)--freezer does freeze food but ice cream seems always a little too soft. Can you help?
For model number gcl22kgresv
PartSelect logo
Hello Terry, Thanks for your question. Check the grommets for the evaporator fan motor and replace them if they are loose or broken. Aside from that, check the evaporator fan motor itself. It may have ice clogging it or the fan blades may be damaged. I hope this helps.

18 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Walter
November 22, 2017
My fan is contacting the evaporator housing cover when it spins and making a lot of noise. I have replaced the fan blade already. Could it be the grommets worn out and not causing the blade to turn properly centered? The fan turns freely. Could the cover itself have warped over time and now contacts the blade as it turns? I assume the motor itself is ok, since it works. Thanks and you guys have a great site. It’s helped me many times!!!
For model number PSHS6MGZBESS
PartSelect logo
Hi Walter, Thank you for your inquiry. If the grommet has worn out they could cause this issue where they are not properly securing the fan blade. If you would like place an order for the grommet, you may order it online, through one of online chat sessions or by calling our customer service line and anyone would be happy to assist you. I hope this helps. Thank you and have a great day!

13 people found this helpful.

Was this helpful?
Thank you for voting!
Margaret
October 19, 2017
How do I know if the grommets need to be replaced. There is a terrible noise coming from the freezer. The fan spins freely, so I believe the problem is not the fan motor. Aside from the grommet, what else could cause the noise.
For model number GTH17DBDFRWW
PartSelect logo
Hi Margaret, Thank you for the question. If the grommets needed to be replaced the fan blades would have a wobble to them as they spun. If they spin smoothly and freely I suggest replacing the motor. Hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Ken
January 15, 2018
The freezer is making a loud noise. It lasts for a little bit, then it stops. We had it fixed once for the same problem when it was under warranty. What would make that happen ?
For model number PTS25LHSARWW
PartSelect logo
Hello Ken, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: evaporator fan blade, evaporator fan motor, the red and blue evaporator fan grommets, the fan bracket, and the condenser fan motor and fan blade Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Wayne
December 11, 2017
How do you test control board to ensure that it is not fault for not starting
For model number HSS25GFPHWW
PartSelect logo
Hi Wayne, Thank you for the question. You can check to make sure that the overload and relay are getting 120 vac to it with a multi meter. If it is then the most likely cause would be a defective compressor. If no power then the control board would likely be the issue. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Marissa Castro
June 25, 2019
My freezer is not freezing, could it be the evaporator fan?
For model number GSS251FRE
PartSelect logo
Hello Marissa, thank you for your question. I would recommend testing the following parts first. It sounds like the defrost cycle is not cycling off. The parts are : Defrost Thermostat Part Number: WR50X10068, Temperature Sensor Part Number: WR55X10025, Defrost Heater and Bracket Assembly Part Number: WR51X10055, and Evaporator Fan Motor Part Number: WR60X10185 first. If those parts are tested and are functioning correctly the issue would be with the electronic control board. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Shane
November 2, 2021
Is the part PS963756 (Red Grommet) interchangeable with part PS284555 (Black Grommet)? The video under the title Evaporator/Condenser Fan Grommet seems to indicate this. Due to back order delays I cant seem to get a red grommet. With my make and model of fridge do I need two reds, two blacks or a red & black? The evaporator fan in the freezer part of the fridge is noisy and I wanted to change the motor and grommets at the same time. Thanks
For model number MTS17BBSERWW
PartSelect logo
Hello Shane, Thank you for the question. The Black Grommets can replace the Red for the Evaporator Fan Motor. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Joe
May 25, 2022
Are f+r grommets the same size on condenser
For model number GTS18XCSARWW
PartSelect logo
Hello Joe, thank you for the question. The Evaporator Fan Grommets, PartSelect Number PS963756 are the same size and part for the front and rear. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Didiet
November 8, 2018
Which freezer fan grommets should i get for my model? Thanks
For model number A3316ABSERWW
PartSelect logo
Hi Didiet, Thank you for your question. The part number for the grommet that you would use in the freezer for the evaporator fan motor is PS963756. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
ROD
October 25, 2023
TOP ICE MAKER IS TRYING TO DUMP ICE, BUT IT ACTS LIKE IT IS TOO FROZEN TO MOVE FREELY.
For model number RF268ABBP
PartSelect logo
Hi Rod, thank you for contacting us. You can use a hair dryer to melt down the frozen ice. If you find your ice maker making ice but not dumping, check the auger motor, part number PS4173183. This part is responsible for pushing ice through the system and into the ice bucket. We hope this helps, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS963756
Manufacturer Part Number: WR02X12008
Brand
Model Number
Description
General Electric
36211XBMBRWW
Refrigerator
General Electric
36211XBMDRWW
Refrigerator
General Electric
36211XBMERWW
General Electric
36211XBMFRWW
General Electric
36211XBRERWW
General Electric
36211XBRFRWW
General Electric
36411XBRERWW
Refrigerator
General Electric
36411XBRFRWW
Refrigerator
General Electric
37511KBSARWW
Refrigerator
General Electric
37511KBSERWW
Refrigerator
General Electric
38181KBRARWW
General Electric
38185KBRARBB
General Electric
38187KBRARCC
General Electric
38341FBMERWW
General Electric
38341FBMFRWW
Refrigerator
General Electric
38351HBMERWW
General Electric
38351HBMFRWW
Refrigerator
General Electric
38351HBRERWW
General Electric
38351HBRFRWW
General Electric
38451HBRERWW
Refrigerator
General Electric
38451HBRFRWW
Refrigerator
General Electric
38481KBRARWW
Refrigerator
General Electric
38481KBRCRWW
Refrigerator
General Electric
38481KBRDRWW
General Electric
38481KBRKRWW
General Electric
38481KBRORWW
General Electric
38481KBRTRWW
General Electric
38481KBRVRWW
General Electric
38485KBRARBB
Refrigerator
General Electric
38485KBRCRBB
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service