Electrolux Refrigerator Parts

Your Price

$40.36

Air Filter

★★★★★

30 Reviews

PartSelect Number PS1993820

Manufacturer Part Number EAFCBF

This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important to change the filter every 6 months to ensure that food is kept fresh, and the humidity is controlled. This part measures about 7 inches wide and 5 inches deep. Follow installation instructions provided by the manufacturer when installing this part to ensure accurate results and further guidance. Remember to unplug the refrigerator from the power source before starting this project. The air filter may be located in different places depending on your appliance, but is usually on the inner right or left side. See your manual for exact location. Our customers rated this as a very easy repair that takes only a few minutes; just locate and remove the old air filter and insert the new one to complete the repair, which requires no tools.

Fixes these symptoms

Fridge too cold
Fridge too warm
Ice maker dispenses too little ice
See more...

Videos!

Your Price

$64.55

Refrigerator Door Shelf Bin

★★★★★

85 Reviews

PartSelect Number PS429873

Manufacturer Part Number 240338101

This door shelf bin for your refrigerator snaps right into place on mounting tabs, requiring no tools for installation. The shelf is sold individually.

Fixes these symptoms

Door won’t open or close
See more...

Videos!

Your Price

$64.68

Refrigerator Door Shelf Bin

★★★★★

80 Reviews

PartSelect Number PS429871

Manufacturer Part Number 240338001

This manufacturer-approved Refrigerator Door Shelf Bin is made of white plastic and is easy to install. It is used to hold heavier items in the fridge, and you'll be able to visually see if the part is broken. This particular shelf attaches to the fridge door and is designed for the UPPER shelf. You can check if this model is right for your appliance by checking your user manual and model number. This model is just over 26" wide, just over 4" tall and just over 7" deep - front to back. This is a simple repair that requires only that you snap the old part out of place and snap the new one into place.

Fixes these symptoms

Door won’t open or close
Leaking
Noisy
See more...

Your Price

$28.51

Air Filter

★★★★★

13 Reviews

PartSelect Number PS12586284

Manufacturer Part Number PAULTRA2

Your Price

$9.00

ROLLER

PartSelect Number PS12071116

Manufacturer Part Number 5304508016

Fixes these symptoms

Door won’t open or close
See more...

Videos!

Your Price

$162.59

Refrigerator Crisper Pan

★★★★★

33 Reviews

PartSelect Number PS429854

Manufacturer Part Number 240337103

The crisper pan, also known as a vegetable drawer, is used to store your vegetables and fruit at a humidity level that will help keep them fresh longer. The pan is clear and made of plastic. This is a genuine OEM part.

Fixes these symptoms

Door won’t open or close
Leaking
See more...

Videos!

Your Price

$125.74

Refrigerator Water Inlet Valve

★★★★★

40 Reviews

PartSelect Number PS7784018

Manufacturer Part Number 242252702

Fixes these symptoms

Ice maker dispenses too little ice
Ice maker not making ice
Ice maker won’t dispense ice
See more...

Videos!

Your Price

$15.10

Crisper Cover Support - Front

★★★★★

13 Reviews

PartSelect Number PS2358880

Manufacturer Part Number 241993101

This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can be used for the front and the rear support, as designed by the manufacturer, and mounts to the inside cabinet wall. Replacing this part is an easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. If you cannot get the pin out you can use a flat-blade screwdriver to push it down and out of sight and it will not harm anything in your refrigerator After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.

Fixes these symptoms