Part Videos
Replacing your Admiral Washer Drain Hose with Bend and Stay
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Admiral, Maytag, Norge, Magic Chef.
Part# WP21001872 replaces these:
21001512, 21001513, 21001872, 31001337, 31001338, 35-2803, 35-2804, 35-3538, 35-3539
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Ric L - January 29, 2020
Verified Purchase
Works Fine
Just what I ordered. Easy to install. Thanks
Adrienne S - January 12, 2019
Verified Purchase
Totally satisfied!
The part was the exact part for my dishwasher. My son-in-law put it in with no problem! I also appreciated the next day delivery.
Al P - September 11, 2018
Verified Purchase
No more leaks !
The part was received in two days and I repaired the issue quickly . Very pleased about The expediency!
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Cracked hose AGAIN!
Hired someone. Note: I purchased two (2) hoses and (2) clamps -- this is the third time I am replacing a cracked hose. The manufacturer needs to use better quality and more flexible material for hoses.
Other Parts Used:
-
BLANCHE from OSSINING, NY
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
9 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original drain hose (rubber) was kinking, piece of junk. I replaced it with a new corigated drain hose .
Leaned washer forward, removed clamp and old hose, replaced with new hose, reinstalling clamp.
Other Parts Used:
-
Edwin from Eagar, AZ
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
6 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Smell from washer
Using nutdriver or screwdriver, remove metal panel from lower left side of back of washer to expose the pump. This is where the drain hose attaches to the washer. Use pliers to move the clamp off of the drain hose, then ease the hose off of the pump by wiggling it back and forth while pulling gently. Be careful to keep drain hose opening pointed upward until you can point it to a bucket, as there's likely to be quite a bit of water in it. Detach drain hose on other end as well (wiggling / pulling works well here; no clamp is used, so no pliers are required). Install new hose by reversing above steps.
Other Parts Used:
-
Patrick from PALO ALTO, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738832
Manufacturer Part Number: WP21001872
Manufacturer Part Number: WP21001872
Brand
Model Number
Description