Part Location Diagram of WP74003020 Whirlpool Bake Element (19 Inch long x 19 Inch wide)
See part 3 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Bake Element (19 Inch long x 19 Inch wide)

★★★★★
★★★★★
3 Reviews
$109.98
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11744015
Manufacturer Part Number WP74003020
Manufactured by Whirlpool
Product Description

Bake Element (19 Inch long x 19 Inch wide) Specifications

This electric oven bake element with female spade connections is 16 inches long and 19 inches wide. It has a terminal depth of three inches, making a total element length of nineteen inches.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat
This part works with the following products:
Wall Oven, Range.
This part works with the following products:
Maytag, Magic Chef, Whirlpool, Jenn-Air.
Part# WP74003020 replaces these:
AP6010825, 04000071, 74003020, 7406P078-60, 7406P093-60, 8189693, 880007, Y04000071
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 25 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Oven (not broiler) element burned out, no oven heat
Inside the oven, I removed one Phillips screw on each side where the element mounts to the back oven wall. Then disconnected the wire on each side using pliers. Unscrewed glass lens, unscrewed light bulb. Replaced all pieces in reverse order. Took less than 10 minutes.
Other Parts Used:
Light Cover Lens Light Bulb - 40W
  • Jim from Placentia, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
72 of 108 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Main burner element got a hot spot and burned through
VERY SIMPLE. Two screws inside the overn hold the element in place, remove them - pull the element forwad to expose the connections, one on each end. Simply unplug the element from the connections to remove the old one, plug the new element into the connections, push the element back into place, and re connect the two screw's that hold it in place. That's it. 5 minutes tops. You guys were great as far as getting the part, quickly and easily. Thanks!
Other Parts Used:
  • Mark from Conway, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The bake element broke in two pieces
removed the 2 screws connecting the element to the back wall of the oven. then slid the element towards me about 3 inches, and that exposed the wires ,which were terminated on to the element. I pulled the wires off the element, and removed it. I placed the new element in the oven,terminated the wires by pushing the connectors on to the element, slid the element towards the back of the oven , pushing the wire connections into the rear wall, until the attached flange ,on the element rested against the wall. I then terminated the screws to hold the element in place. Turned on the oven and made some biscuits. All went well
Other Parts Used:
  • James from Harpers Ferry, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element melted
unscrewed back plate (one screw each side) pulled gently to expose connections. NOTE: BIG MISTAKE - forgot to shut off power!!!! I blew the clock which now needs to be replaced (in process). Back to the element though - connections very easy. One side had to be pulled from behind (used needle nose plyers to pull through opening). Connected element both sides gently pushed back in to position and replaced screws. I'll let you know how the clock replacement goes!
Other Parts Used:
Infinite Switch Knob
  • Julie from Boerne, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old element snapped, crackled and popped after years of relentless use-and-abuse.
Here's the way to do it, according to the "Describe how you did the repair" prompt: "First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires..."

Right, however, I shoulda-woulda-coulda listened to my fellow DYI'ers on this site about c-a-r-e-f-u-l-l-y feeding the wiring out of the rear hole.

But, first, turn off the power. Secondly, make sure the power is off at the breaker. I did and that worked fine.

However, as I pulled the connecting end of the bake element out, bummer! The spade electrical fitting popped off and retreated into a sea of insulation! Future solution? Like The Man suggested, Carefully, gently pull the element out and grab the connecting wire, pull it out to get a little slack and attach a clothespin to the end, so it won't back out and disappear! Then, detach the broken element, reverse the steps with the new bad boy and start cookin'!

If you need to pull the stove out, as we did, to "get at" the back of the oven and the retreated wire, move the oven out on a parallel height platform or boards as it exits the opening. Note carefully as to how much slack there is on the electrical connection, typically armored cable or another, er, "homebrew" electrical solution.

Take your time, as the pie will wait.
Other Parts Used:
  • Christopher from San Fransisco, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burned tube
I removed the two screws that attach the element to the back of the oven. Then I pulled the element out a few inches and disconnected each of the wires attached to the element.
These were easy to disconnect because they were quick-disconnect spade type connectors.
Note the easiest part was the ordering and delivered the very next day WOW
Other Parts Used:
  • Salvador R from Castaic, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven burner burnt out
After removing the screws holding in the heating element and pulling out. I quickly realized I had a problem. The connectors on the wires and the connectors on the element were the same(female). So I had to ct the wire connectors off and put the correct type (male) connector on. If not for this the repair would have taken 5 minutes including time to pull stove away from wall and unplug and then plug back in and push to wall
Other Parts Used:
  • Brian from North Manchester, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element blew out while baking a cake didnt get no cake that night
first i disconnected the power then removed the back cover then tested the element after removing the wires and found the element to be bad , did some research found parts select and happly found our part and ordered it .part came in removed back cover unhooked two wires took out two screws , removed and replaced , thank you parts select. every one needs to know about you.
Other Parts Used:
  • Richard from Longmont, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element went kuput
This is a very easy repair. But, make sure you first unplug the stove. Simply turning off the oven is not good enough. My wire connectors were reversed compared to the new element so I had to change the ones attached to the stove from female to male connectors. I bought 18 gauge male connectors, cut the old ones off and crimped on the new ones, attached the new element, pushed it back into place, put the two screws back in place and we were back in business.
Other Parts Used:
  • Robert from Lakeport, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element caught on fire.
I removed the 2 screws that hold the element in place. (located in the back of the oven). I then pulled the 2 wires about 3 inches & disconnected the 2 wires (1 red & 1 yellow).
Other Parts Used:
  • Marsha from Pekin, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
August 26, 2019
What is the wattage range and voltage range on this baking element?
For model number 74003020
PartSelect logo
Hi David, Thank you for your question. The bake element has 2800 watts and 240 volts. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Nancy
October 3, 2019
Hi there, just resubmitting this not sure if i sent you the right email, but i do not have the mdoel # for my Magic Chef stove, bought in 2004, and needs a new oven element, which looks the exact to the one on line here, please advise if i can order this one? Thank you
PartSelect logo
Hello Nancy, Thank you for the question. Here is a link to help you locate the model number sticker on the appliance.Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you! https://www.partselect.com/Find-Your-Range-Model-Number.aspx

Was this helpful?
Thank you for voting!
Gary
November 23, 2019
Element not getting hot in oven if i remove element can i check with a ohm meter
For model number Bake element waytag 74003020
PartSelect logo
Hello Gary and thanks for writing. Yes, you can check the element for continuity with an ohmmeter. Hold one probe on each of the termianls, the needle should move and show between 1 and 50 ohm of resistance. If you have resistance your element is good. We hope this helps. Please contact us anytime.

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744015
Manufacturer Part Number: WP74003020
Brand
Model Number
Description
Magic Chef
9875VRV
Wall Oven - Built-in, Electric
Magic Chef
9875VVV
Wall Oven - Built-in, Electric
Magic Chef
9875VYV
Wall Oven - Built-in, Electric
Magic Chef
9875XRB
Wall Oven - Built-in, Electric
Magic Chef
9875XVB
Wall Oven - Built-in, Electric
Magic Chef
9875XYB
Wall Oven - Built-in, Electric
Magic Chef
9876VVV
Wall Oven - Electric
Magic Chef
9876XVB
Wall Oven - Electric
Magic Chef
9895VRV
Wall Oven - Built-in, Electric
Magic Chef
9895XRB
Wall Oven - Built-in, Electric
Admiral
A9875VRV
Wall Oven - Built-in, Electric
Admiral
A9875XRB
Wall Oven - Built-in, Electric
Admiral
A9895VRV
Microwave Oven Combo - Built-in, Electric
Admiral
A9895XRB
Microwave Oven Combo - Built-in, Electric
Magic Chef
C9875VRV
Wall Oven - Built-in, Electric
Magic Chef
C9875VVV
Wall Oven - Built-in, Electric
Magic Chef
C9875XRB
Wall Oven - Built-in, Electric
Magic Chef
C9875XVB
Wall Oven - Built-in, Electric
Maytag
CWE9000BCB
Wall Oven - Freestanding, Electric
Maytag
CWE9000BCE
Wall Oven - Wall, Electric
Maytag
CWE9000BCM
Wall Oven - Freestanding, Electric
Maytag
CWE9000BDB
Wall Oven - Freestanding, Electric
Maytag
CWE9000BDE
Wall Oven - Wall, Electric
Maytag
CWE9000CDB
Wall Oven - Freestanding, Electric
Maytag
CWE9000CDE
Wall Oven - Wall, Electric
Maytag
CWE9000DDB
Wall Oven - Freestanding, Electric
Maytag
CWE9000DDE
Wall Oven - Wall, Electric
Maytag
CWE9030BCB
Wall Oven - Built-in, Electric
Maytag
CWE9030BCE
Wall Oven - Built-in, Electric
Maytag
CWE9030BDB
Wall Oven - Built-in, Electric
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service