Product Description
Inner Door Foam Insulation Strip Specifications
This inner door insulation seal is almost twenty-four inches long. It is gray in color and is made of a foam material.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Dishwasher Inner Door Foam Insulation Strip
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag, Amana, Magic Chef, Jenn-Air.
Part# WPW10117748 replaces these:
AP6015268, 9-3233, 903233, W10117748
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Richard W - July 7, 2023
Verified Purchase
Worked as expected
Fixed leak. Much cheaper than buying a new dishwasher.
Carla T - January 24, 2022
Verified Purchase
Great part, just what I needed and worked as expected!
Quick service. Part came in excellent condition. Easy repair and video was very helpful!! Definitely recommend ordering from here.
Peter V - August 12, 2020
Verified Purchase
The part arrived fast and installation was easy
The part arrived fast and the installation was straight forward using an youtube demo. It solved the problem of leaking at the front bottom door.of the dishwasher..
Copiexpress C - October 10, 2019
Verified Purchase
worked out great
washer has no more leaks
Daniel S - May 13, 2019
Verified Purchase
Great service: the right part; quick delivery. But I ordered the wrong part.
Didn't stop the leak. Probably needs a door seal. Not prepared to pay that cost, rather buy a new dishwasher. Partselect is a great service, nevertheless. Thank you.
Yves D - April 26, 2019
Verified Purchase
Still leaking....
Replaced the gasket around the door and the inner door foam insulation at the same time.....but it is still leaking!
Scott M - January 10, 2019
Verified Purchase
Shipping costs too much
The part was ok, a bit pricey but I needed it. Whatever. But I wish there was a more inexpensive way to ship it.
Louis E - July 27, 2018
Verified Purchase
Vidio was very helpful.
The part was fine and instructional video was fine. Price a little steep. The cost of the parts is expensive especially if you have to buy a few which I did. You can buy a new machine for the cost of just a few parts.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 25 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water Leak at right side bottom of the dishwasher door
After dissassembling the unit to discover the leakage source I determined that it would do best to replace the top three contributors to the problem as listed by you. Disassembly, parts replacement and reassembly was straight forward and a few hints garnered from your good instructions and assembly blow-up drawings made the job simple with the most difficult task being the removal of the adhesive foam gasket at the bottom of the door's interior. After scraping as much of the deteriorated foam away as possible with a plastic scraper I used some of my wife's nail polisher remover and a clean-up rag (being careful not to get the remover on plastic parts)and soon I had the adhesion area surface clean and ready to receive the new seal. With close attention to clean up of residues left behind from detergent and water and care taken with part installation and reassembly it no longer leaks and I hope to get another 10-15 years of leak free operation out of the dishwasher
Other Parts Used:
-
Bernard from Williamsport, PA
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Socket set
467 of 482 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher door leaks
I ordered and replaced both the door gasket (easy) and inner door seal (difficult) to try and correct a leak during operation. The door gasket was easily replaced. However, the inner door seal was a bit more trouble. After removing the inner door I found that the old inner seal needed to be removed and surfaces thoroughly cleaned of old build-up of dishwasher soap residue, in order to allow the sticky back tape side of door seal to properly stick to the door. There also was a plastic cover over the wire bundle that needed to be cleaned. The inner door seal was the exact length, so proper positioning of the sticky back was very important.
Upon reassemly the leak still existed and I was unable to correct the leak. Further inspection indicated that the basic tub/body of the dishwasher might be slightly distorted due to age and may not create seal with door seal as originally designed.
I guess I need to find a new dishwasher, at this point.
A word to the wise: Check to see if the tub/body is still in good condition.
Upon reassemly the leak still existed and I was unable to correct the leak. Further inspection indicated that the basic tub/body of the dishwasher might be slightly distorted due to age and may not create seal with door seal as originally designed.
I guess I need to find a new dishwasher, at this point.
A word to the wise: Check to see if the tub/body is still in good condition.
Other Parts Used:
-
jerry from vernon, CT
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
80 of 89 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking on right fromt of the door.
removed the door gasket by just pulling it out and pushing the new one in its place. very easy, took five minutes at most. Then removed the 7 screws holding the inside of the door in place, removed the dispenser assembly, held by two drive screws and replaced the dispenser door latch grommet. Finally, removed the insulation foam gasket. Had to scrape the old adhesive from the door as the old a\gasket had disintegrated. This took the most time. Then just pressed the new foam gasket in place. Reading the comments from others was a big help. Don't think I would have replaced the dispenser grommet had I not been warned about it. I'm sure it was part of the problem. All is well now, no leaks.
Other Parts Used:
-
Gary from Longville, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
36 of 38 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaking below door
This ended up to be a (2) phase project. The first repair was to replace the door seal and inner door foam. Thanks to earlier online comments this part was really easy, but we still had a small leak. When I had removed the interior face of the door panel to replace the inner door foam, I had noticed the insulation was wet and deducted that the 'soap cup door latch gasket' was the real culprit so I had to place a second order (Phase 2). The order came quickly and in time for next Saturdays to to list. My advice is to replace all 4 items at the same time and save on mailing cost and repair time; reservoir O-ring, soap cup door latch gasket, inner foam gasket and door gasket. net repair time, about an hour start to finish.
Don and Rosie
Rochester, NY
Don and Rosie
Rochester, NY
Other Parts Used:
-
Donald from Pittsford, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
31 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking at bottom of door
The initial repair was more involved due to figuring out how to get at the problem. A foam sealer strip located at the bottom of the inner door had lost it's seal. I first sent off for one and it was of relatively thin material. It was carefully installed but still leaked. I ordered another one from Part Select and it had thicker foam. It was installed right over the previously installed strip and made a tight seal. (knock on wood)
Other Parts Used:
-
E L from Seeley Lake, MT
-
Difficulty Level:Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
27 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door leaks
Replaced the door seal. Removed the old seal and gently stretched the new seal and pushed it into the channel. Snipped off about 2 inches excess seal. As far as the Inner Door Foam Insulation Strip goes, it was not as easy. To begin with, the old Foam Strip was attached to the door insulation and not the door. The attempt to remove the old Foam Strip from the insulation became cumbersome, so I just attached the new Foam Strip on top of the old Foam Strip. So far, after a few cycles, it appears that it corrected the leak.
Other Parts Used:
-
ROY from SUFFOLK, VA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
24 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water was dripping from the bottom of the front loading door. Over time this had seeped into the insulation foam strip and formed a solid encrustation within the foam strip.
The real cause of the leak had nothing to do with the foam strip. The latch for the front loading door at the top needed to be adjusted to hold the door in tighter to the rubber door seal. This simple adjustment stopped the leak but since the foam seal was all encrusted with dried detergent from probably years of absorbing the leak, I replaced it with your new foam strip. I used a screw driver with torx bit and removed the stainless screws holding the inner door to the outer door. Once these were separated I removed the old foam strip using a putty knife and lacquer thinner. Placing the new strip onto these cleaned surfaces was the easiest part of the whole repair.
Other Parts Used:
-
Dan from Clarkston, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
18 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking under door during wash and rinse cycles
Removed old gasket and foam strip. Cleaned area. Installed door gasket. Trimmed foam strip to fit and installed.
Leak has stopped!
Leak has stopped!
Other Parts Used:
-
James from Gulf Breeze, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
14 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher leaked
First replaced rubber seal around door, which did not stop the leaking.
Then ordered insulation foam strip and replaced old one, which fixed problem. Put new strip over the old one because tub was slightly warped.
Very pleased with order speed and cost.
Then ordered insulation foam strip and replaced old one, which fixed problem. Put new strip over the old one because tub was slightly warped.
Very pleased with order speed and cost.
Other Parts Used:
-
Jean from Gaffney, SC
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
10 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Small / slow leak at bottom corner of dishwasher door.
After examining the door and main seal around the dishwasher I thought everything looked okay. I looked online to order a new seal anyway and discovered from others that the leak was probably the insulation strip inside the door rather than the seal around the dishwasher. I ordered an insulation strip and it arrived a couple days later. I removed the seven screws of the interior door cover and disconnected the electrical. After removing the old insulation strip and installig the new one I reconnected the electrical wiring/plugs, put the door cover back on, and reinstalled the screws. Total time was about 15-20 minutes and the leak stopped. It was very easy and saved the cost of a repairman or a new dishwasher. I'm very glad that I "listened" to others and went with the new insulation strip.
Other Parts Used:
-
Adam from Acworth, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
10 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
February 8, 2018
When I replaced the bottom seal it was installed over the insulation at the bottom of unit when watching video it appears that the seal is placed directly on the metal at the bottom of the door my question is should i trim back the insulation before installing thanks the door seal
For model number MDB5600AWW
Hi Paul,
Thank you for your question. You should not have to trim back your insulation to install this part. I hope that helps. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Larry
December 14, 2019
Does this Maytag dishwasher have a lower door gasket? Mine dw is leaking but if that foam insulator does not also inhibit leaks, then it may be just the gasket running around the opening that needs to be changed out
For model number mdb7100aww
Hello Larry and thanks for writing.
Door gasket Part Number: PS11746830 is in the list of compatible items for your model. Your unit also has the bottom foam Seal # PS11748543. It is recommended to replace both parts at the same time. We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
James
October 7, 2021
I have replaced the door gasket and the inner door insulation strip on dishwasher MDB6601AWS and it still leaks at the bottom left of the door. What else should I replace?
For model number MDB6601AWS
Hello James, Thank you for the question. We suggest checking the Bottom Door Gasket that is attached and sold as part of the Inner Door Liner. Check for wear and damage to the left corner. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Denis
December 22, 2019
Thank you for the opportunity to discuss my problem. My dishwasher has leaked on two occasions. I first replaced the door seal with success! Thank you for the video showing how to do this. The seal was expensive at $110 cdn dollars. Wow. Now i have a second leak at the bottom of the door. It seems to be coming from the middle of the door. I have taken the inside panel off and now plan on replacing the foam seal as instructed on your video. However, i am concerned that the leak might actually be the plastic panel at the bottom as it seems to be pulling apart at both ends. I am wondering if the plastic panel can be replaced and what that part number would be? Thank you
For model number Maytag dishwasher PS11748543
Hello Denis and thank you for writing.
The inner seal foam should do the trick, however, we would like to look into the matter of the toe panel, but we do require your full model and serial number to do this correctly, so if you could please supply us with that information you would be very happy to look into this for you. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748543
Manufacturer Part Number: WPW10117748
Manufacturer Part Number: WPW10117748
Brand
Model Number
Description