Part Location Diagram of WPW10434452 Whirlpool Dual Element Control Switch
See part 4 in the diagram
Replacing your Whirlpool Range Dual Element Control Switch
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Dual Element Control Switch

★★★★★
★★★★★
13 Reviews
$138.55
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11754687
Manufacturer Part Number WPW10434452
Manufactured by Whirlpool
Product Description

Dual Element Control Switch Specifications

This switch controls the stove top surface burner.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Whirlpool Range Dual Element Control Switch

Replacing your Whirlpool Range Dual Element Control Switch
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Maytag, Amana, KitchenAid.
Part# WPW10434452 replaces these:
W10434452
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
13 Reviews
4.9
Filter By Rating:
  • 5 Stars
    12
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 2 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Switch worked off and on but you could not set heat to a specified temperature.
Remove back panel 10 screws. Disconnect plug in fixture from switch. Front of range remove knob (it just pulls out) remove 2 screws, remove switch. To install reverse procedure.
Other Parts Used:
  • Dale from POUND, WI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bard burner switch
Removed rear panel disconnect power from wall removed old switch and replaced with new switch and reassembled
Other Parts Used:
  • Edward from KISSIMMEE, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

44 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alex
June 17, 2019
The burner in the front left that has two sizes only works when the knob is turned to a specific spot. It seems to only run on high when the spot is hit. Is this the correct part that would fix this issue. All other burners work correctly.
PartSelect logo
Hello Alex, thank you for writing. Replacing the Dual Infinite Switch may fix the issue, but we will need the model number for the stove to see if this is the correct replacement or which one is. We look forward to hearing back from you.

16 people found this helpful.

Was this helpful?
Thank you for voting!
Phil
December 10, 2018
I'm looking for the control switch for the front right burner 10" single burner.
For model number WFE520C0AS0
PartSelect logo
Hello Phil, thank you for your question. The switch for that unit is PartSelect Number PS11740783. Please enter the part number into the site for current price and availability. Good luck with your repair!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Simon
December 3, 2019
My left front dual burner on my Maytag ymer7765ws3 is always on high. Is this the right part to change it?
For model number YMER7765WS3
PartSelect logo
Hello Simon, thank you for inquiring. Yes, replacing this Dual Infinite Control Switch for your model should fix the issue. Good luck with your repair!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Jeff
September 24, 2019
Whirlpool YWFE710H0BS0 range, it appears the infinity control may be shot for the left front burner. It is a dual control. There are 3 different control numbers. Is the correct replacement number WPW10434452?? thanks in advance.
For model number YWFE710H0BS0
PartSelect logo
Hi Jeff, Thank you for your question. The part number listed under your model number for the infinite switch for the dual burner is WPW10434452. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Craig Strickland
January 30, 2019
I have a Whirlpool gas top and the the burner that is a big and small burner together will not turn down, it stays on high, don't know if it is the burner or the switch, please help.
For model number Wfe515s0es0
PartSelect logo
Hello Craig, thank you for your question. When a burner remains on high and can't be controlled, the most likely issue is the switch. We would recommend replacing PartSelect Number: PS11754687. Good luck with your repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Andrew M
February 27, 2019
I’m looking for the part number for the front, right burner control/switch for Whirlpool wfe515s0es0. Tks
For model number WFE515S0ES0
PartSelect logo
Hello Andrew, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PS11740783. Have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Alex
June 17, 2019
Thanks for the response. The model number is WFE510S0AS0. The burner in the front left that has two sizes only works when the knob is turned to a specific spot. It seems to only run on high when the spot is hit. Is this the correct part that would fix this issue. All other burners work correctly.
For model number WFE510S0AS0
PartSelect logo
Hi Alex, Thank you for your great question. Yes, if your burner is only working on one setting, then the dual infinite control switch will resolve this issue. I hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Walter
July 2, 2019
My dual burner only sets on hi, does that mean the control switch or burner is bad? Thanks
For model number KERS202bwh0
PartSelect logo
Hi Walter, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Helen
September 6, 2019
My burner on the front left is not working.. what is the part number for the element and also the switch?
For model number wfe710h0ah
PartSelect logo
Hello Helen, thank you for your question. The left front element is PartSelect Number PS11749881. The switch for that element is PartSelect Number PS11754687. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Patrick
November 19, 2019
My front right burner comes on, but no matter if i have it on low, med, or hi, it stays on hi. Will this fix my issue? Thanks.
For model number MER8680BB0
PartSelect logo
Hello Patrick, Thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11754687
Manufacturer Part Number: WPW10434452
Brand
Model Number
Description
Amana
4KAER7685EW0
Range - ELECTRIC RANGE
Whirlpool
4KAER7685EW1
Maytag
4KMER7685ES0
Range - ELECTRIC RANGE
Maytag
4KMER7685ES1
Maytag
4KMER7685EW0
Range - ELECTRIC RANGE
Whirlpool
4KMER7685EW1
Whirlpool
4KWFE7685ES0
Range - ELECTRIC RANGE
Whirlpool
4KWFE7685ES1
Whirlpool
4KWFE7685EW0
Range - ELECTRIC RANGE
Whirlpool
4KWFE7685EW1
Amana
AER5630BAB0
Range - ELECTRIC RANGE
Amana
AER5630BAS0
Range - ELECTRIC RANGE
Amana
AER5630BAW0
Range - ELECTRIC RANGE
Amana
AER5844VAB1
Range - 30" ELECTRIC FREESTANDING RANGE
Amana
AER5844VAS1
Range - 30" ELECTRIC FREESTANDING RANGE
Amana
AER5844VAW1
Range - 30" ELECTRIC FREESTANDING RANGE
Amana
AER5844VCB1
Range - 30" ELECTRIC FREESTANDING RANGE
Amana
AER5844VCB2
Range - 30" ELECTRIC CERAN FREESTANDING RANGE
Amana
AER5844VCS1
Range - 30" ELECTRIC FREESTANDING RANGE
Amana
AER5844VCS2
Range - 30" ELECTRIC CERAN FREESTANDING RANGE
Amana
AER5844VCW1
Range - 30" ELECTRIC FREESTANDING RANGE
Amana
AER5844VCW2
Range - 30" ELECTRIC CERAN FREESTANDING RANGE
Amana
AER6603SFB0
Range - ELECTRIC RANGE
Whirlpool
AER6603SFB1
Maytag
AER6603SFB2
Range
Amana
AER6603SFB3
Range - Electric Range
Amana
AER6603SFB5
Range - Amana Range/Stove/Oven Aer6603sfb5
Amana
AER6603SFS0
Range - ELECTRIC RANGE
Whirlpool
AER6603SFS1
Maytag
AER6603SFS2
Range
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service