Part Location Diagram of WH02X10237 GE Screw - 1/4-20 MCH HXW 5/8 S
See part 301 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Screw - 1/4-20 MCH HXW 5/8 S

$17.33
  Special Order
PartSelect Number PS1482328
Manufacturer Part Number WH02X10237
Manufactured by GE
Product Description

Screw - 1/4-20 MCH HXW 5/8 S Specifications

This is a replacement screw for your washer. The screw has a hex head and is approximately 1 inch in length. The washer portion of this screw is approximately 1 inch in diameter. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH02X10237 replaces these:
AP3996329, 1264449
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.9 / 5.0, 10 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Agitator will not spin
Agitator would not spin and it was going to cost me I've a hundred soars for someone to come and fix it. I looked on this sight and found out what I thought was the problem and ordered four parts to fix it. I was amazed because they came in two days later. I started withe coupling which was the cheapest part and instaled it and it fixed it to return the other parts I called the 800 number and they emailed me a return authorization and I sent it back so it cost me 15 dollars and five minutes to fix it.
Other Parts Used:
Agitator Agitator Coupling V-Style Drive Belt
  • Jared from georgetown, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
52 of 70 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator in washing machine not moving
First, I removed the liquid softner dispenser cup from the agitator. Next I gripped the bottom of the agitator and pulled straight up. This was the most difficult part of the repair. Next, I removed the couplier bolt with the appropriate size socket wrench. And then removed the couplier from the transmission shaft. This exposed the shaft. Upon receipt of parts from Part Select, I proceed to install in the reverse order. I slide the new couplier back onto the transmission shaft. and bolted down with new bolt using the original socket wrench. Next I slide on the new agitator making sure the "tongue and groves" matched. Then I placed the liquid softner cup back onto the new agitator. And with great joy my washer is working once more. Thank you Parts Select.
Other Parts Used:
Agitator Coupling Kit Dual Action Agitator
  • Diane from Zebulon, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
40 of 51 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator came off of spline and broke
The bolt that held the agitator assembly on had sheared off. Had to drill out the old bolt out of the spline. After that, it was very easy. Just bolt the agitator assembly onto the spline and it worked like a charm
Other Parts Used:
Agitator Coupling Kit Agitator
  • Michael from Lebanon Junction, KY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
22 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fin Broke off the Agitator
My wife washed a washable mop head and somehow it managed to break one of the fins off the agitator. I ordered a new agitator, fabric softener dispenser, agitator coupling, and bolt. I figured since I had to replace the agitator I would replace everything. This was super simple and easy. I watched a few videos on getting the agitator off, some people said you may need to run some rope under it to get it off. Luckily mine popped right off. I grabbed both sides and gave it a good solid jerk straight up and it came right off. I used a 3/8 drive socket wrench and a 7/16 socket to remove the bolt from the agitator coupling. I installed the new coupling with a new bolt, lined up the agitator and snapped it right on. Popped in the new fabric softener dispenser and that was it. I may have spent a total of 10 minutes counting unpacking the new parts and carting the old ones out to the trash can replacing this. If you can operate a socket wrench or a new smart phone this is really a piece of cake.
Other Parts Used:
Dual Action Agitator Agitator Coupling Fabric Softener Dispenser
  • Keith from STATESVILLE, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy while spinning
I dissasembled the machine and it took about 30 minutes. Orderd the parts recommended for noisy spinning. Reinstalled the new parts / changed all drum straps. Cleaned the drain drum and spin drum and after complete reassembly the washer is still noisy in agitation and spin cycle. The motor,transmission,counter weight,and drum look ok but there is still a reason why the machine is still noisy. Spent 120.00 dollars on parts so far but the drum and motor,transmission and counterweight are very expensive to replace. I am just going to keep using the machine until the washer fails to work anymore. I'm not going to put any more money in the washer. I will just buy a new one. It's not hard to dissasembled and reassemble the washer. I purchased the parts that was recommended to fix the washer but they were not the ones.The new parts did help like the tub seal but the bottom line is that the washer is still noisy. I watched your videos to work on the washer and there were no special instructions on disassembly and reassembly. Like always there must be more than i know to repair this washer. Thanks
Other Parts Used:
Dual Action Agitator Tub Seal Split Ring Agitator Coupling Water Pressure Switch Hose Hub Washer Tub Bearing Tub Bearing Washer Tub Dampening Strap
  • Thomas from SELAH, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower agitator, very loose and wobbly
Reached down into the washer bowl. Fingers on each side of the agitator base. Quick jolt up agitator popped out adjustable wrench took the bolt. Off of the agitator coupling removed coupling wire, brushed the gear slots installed a new coupling with both new bolt lined up, agitator slots pump, the new agitator on after lined up with a down force quick jolt, then installed the new fabric softener, part on top of agitator
Other Parts Used:
Agitator Cap - Short Dual Action Agitator Agitator Coupling
  • jack from SANTA ANA, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Wrench (Adjustable)
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hub washer replacement
I noticed a loud noise during the spin cycle, I purchased a bearing, but after taking the washer apart, I realized that the hub was worn out, I replaced the bearing and other parts to put it back in running condition, it was a worthwhile job, and cost saving. I have to thank partselect for the helpful videos.
Other Parts Used:
Tub Seal Split Ring Inner Tub Base Hub Hub Washer Tub Bearing Washer Hub Nut V-Style Drive Belt
  • Dennis from NOBLESVILLE, IN
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking shaft seal
This sounds like an easy fix to replace the shaft seal after watching the video, Oh how WRONG was I.....Firstly the video and parts list show just pull the agitator off..... NOOOOOO the bolt (Screw) is deep inside the agitator and that has to be removed to get the agitator off.....maybe in some models they have changed this poor design but not mine....As the screw is open to all the water and detergent guess what, it was so corroded you could get a sock to grip on it. Only solution was to cut the agitator in half at the bolt head level to get a vice grip on the rounded bolt head to undo it........It doesn't stop there, then you have to remove the fins in the remaining part agitator to get get the vice grips on. OK so far so good, now try and undo the big left hand thread nut....good luck, totally corroded, tried penetrating oil, heating it up you name it, nothing. I had a 1 11/16 socket but you need a deep socked as the shaft protrudes too far...solution drill the nut in three places to break it off the thread....OK so far we are winning....Now try to get the split spacer off the corroded shaft, no way was that going to happen it did eventually span in half so had to buy that too.....NOW WE STILL have to get the washer off the shaft...Run out of space to continue...
Other Parts Used:
Tub Seal Agitator
  • Donald from SAINT JOSEPH, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Socket set, Wrench (Adjustable)
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inner Tub Base Hub replacement
The tub base hub developed a large crack and spin started to make a large vibration. Agitator coupling was frozen, so I broke it by dremel, wedge (a minus driver) and a hammer. The hub nut was also frozen, so I cut two slits into the nut with dremel, then broke it into two with a wedge and a hammer. Once the hub nut was removed installing new parts was straightforward. Half year ago I replaced the timer and capacitor of this washer and together with this repair the total repair cost has now run up to $300. I think I should have bought a new washer half year ago but now that the repair has been done, I hope it will keep working for at least another 5 years. Otherwise I can't justify the $300 cost.
Other Parts Used:
Agitator Coupling Inner Tub Base Hub Hub Nut Tub Dampening Strap
  • Tatsuhito from S HUNTINGTON, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator was not working during wash, would during end spin cycle
The worst part was removing the agitator. I finally found a thread that explained you have to pull directly up to release the 'clips' that held the agitator to the coupler. I used my kids' jumprope, tied around a thick, 4 ft. dowel, with the other end tied around the agitator fins. The key was making sure the rope was straight above the top of the agitator. It took my entire body weight on the dowel/lever to get the agitator to pop off, but it finally did. After that, repair took about 45 seconds. I was thrilled that the diagnosis (with the complete help of this website) was right and that was all it took. Coupler arrived within 2 days. I also ordered the belt, in case that was the problem, and a new nut (good thing, mine was rusted). Thank God this was the solution- especially since my 5 yr old has the stomach flu and I have lots of laundry- no time for the machine to be down! Fantastic customer service and help diagnosing problem on this site!!
Other Parts Used:
Agitator Coupling V-Style Drive Belt
  • Heather from De Soto, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Abilio
November 12, 2017
The washing machine is not spinning
For model number WDSR2120J9WW
PartSelect logo
Hi Abilio, Thank you for the question. If the appliance is agitating and working normal but not spinning, I suggest replacing the Lid Switch Assembly, PartSelect Number PS5135698.The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning. If it is defective the appliance will think the lid is open and will not allow it to spin. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1482328
Manufacturer Part Number: WH02X10237
Brand
Model Number
Description
General Electric
57441DCWW
Washer
General Electric
57481DCWW
Washer
General Electric
57731H0WW
Washer
General Electric
57731H2WW
Washer
General Electric
57731H3WW
Washer
General Electric
57731H5WW
Washer
General Electric
57731H6WW
Washer
General Electric
57731H7WW
Washer
General Electric
57731H8WW
Washer
General Electric
57731H9WW
Washer
General Electric
57751H0WW
Washer
General Electric
57751H1WW
General Electric
57751H2WW
General Electric
57751H3WW
Washer
General Electric
EWA4600G0WW
Washer - Ge Washing Machine Ewa4600g0ww
General Electric
EWA5600G0WW
Washer
General Electric
EWA5600G1WW
Washer
General Electric
EWA5600G2WW
Washer
General Electric
EWA5600G3WW
Washer
General Electric
EWA5600K0WW
Washer
General Electric
GBAN2800F0WW
Washer - WASHER
General Electric
GBSR3140H1WW
Washer
General Electric
GBSR3140H2WW
Washer
General Electric
GBSR3140H3WW
Washer
General Electric
GBSR3140H4WW
Washer
General Electric
GBSR3140H5WW
Washer
General Electric
GBSR3140H6WW
Washer
General Electric
GBSR3140H7WW
Washer
General Electric
GBSR3140H8WW
Washer
General Electric
GCAP1000M0WW
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service