Product Description
Surface Burner Knob Kit Specifications
This kit includes 4 knobs. They accept a double flat shaft.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Cooktop.
This part works with the following products:
Jenn-Air, Kenmore.
Part# 12200035 replaces these:
AP4011301, 1658, 12200035, 12200035, 7-3272, 7-3662, 7-4844, 703272, 703662, 704844, Y703272, Y703662, Y704844
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Doreen D - February 4, 2023
Verified Purchase
Great service!
Fast service. Great parts and it fit perfecly.
Diana S - September 29, 2022
Verified Purchase
Exactly as described
Previously, I’d bought similar knobs from Amazon. It was a third party seller, who said they would fit my range. They didn’t! I’m so pleased with the parts I bought from Parts Select. Perfect!
Lynn And Ray W - March 3, 2022
Verified Purchase
Easy repair and looks great
We purchased four replacement knobs for our Jenn-Air countertop stove. They arrived in a few days and within minutes the old knobs were in the garbage and the new knobs in place. Enhanced the look and work great!
Ron J - December 10, 2020
Verified Purchase
Hen air replacement knobs
Exactly the correct part. Had to be very specific from a large array of choices
SHAWN O - September 27, 2020
Verified Purchase
Good Replacement Parts
Fast service. Good quality
Karen R - October 18, 2019
Verified Purchase
Replacement Knobs for Countertop Stve
The parts arrived quickly, work well and improve the appearance of the unit. I am very happy with this purchase
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 15 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Cooktop was looking old and worn though there was no working problem.
All of the "old" pieces were very easily removed and replaced with the new pieces. The update looks terrific and works just fine!
Other Parts Used:
-
Donna from Charlotte, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
150 of 298 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The knobs were stripped and we could not turn 2 of the burners on.
I used pliers to remove old knobs and just inserted the new ones. I had tried using cheap generic knobs that did not work.
Other Parts Used:
-
Val from Suwanee, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
8 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Range top was worn and dirty
opened shipping boxes, unpacked, unplugged old units, knobs and filter, repacked old units into boxes, plugged new units in, total time less than five minutes.
Looks and works like a new unit.
Looks and works like a new unit.
Other Parts Used:
-
John from Austin, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
7 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old
I lifted off the old knobs, pushed on the new. Easy and the cooktop looks brand new!
Other Parts Used:
-
Jacqueline from Bristol, RI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke my knobs off with cast iron skillet, old knobs needed replaced.
I removed the old knobs and replaced with the new ones. We also replaced one of the switches which the knobs fit on, because I broke the switch off with a Cast iron skillet.
Other Parts Used:
-
Regina C from Oakland, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no problem...just wanted a fresh look
our cook top is so old, but no need to replace just yet. so I ordered new knobs to get a new look
thank you!
thank you!
Other Parts Used:
-
JANE from BALTIMORE, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cleaners lost knob.
I pulled off the other 3 old knobs. Pushed on the new ones, which pushed on hard, but work. They stick out farther than the originals. They look a little different, but only to me. No one else would notice.
The main part is, it works. A little spenty for my taste, but did not know where else to go and they arrived very quick.
The main part is, it works. A little spenty for my taste, but did not know where else to go and they arrived very quick.
Other Parts Used:
-
Virginia from Bothell, WA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken burner knob
removed all for knobs and replced with new ones
Other Parts Used:
-
Shirlely from Citrus Heights, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hmm, let's see, knob didn't match all my other new knobs
Oh this was a toughie and I was sweating it out.
With a delicate touch I removed the old knob and pushed on the new knob, 5 seconds
With a delicate touch I removed the old knob and pushed on the new knob, 5 seconds
Other Parts Used:
-
James from Devon, PA
-
Difficulty Level:Very Difficult
-
Total Repair Time:Less than 15 mins
3 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
surface unit infinite switch needed replaced. The knobs and lens were cosmetic.
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires and replaced the connections in sequence. It was easy. BUT, be sure the circuit breaker is disconnected if you want to enjoy the fruits of your labor. I figure I saved about $1100 by not having to buy a new stove top and I now have an almost new one. The cook appreciates it too.
Other Parts Used:
-
Edward from New Hartford, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
June 27, 2019
Knobs and knob holders are broken mean switch. Knob set comes with switches or just knobs, how to order a complete set of 4 and cost. Any place in Calgary in Alberta I could pick it up, thanks,
For model number Model No. C202-C, Serial No. 287528RJ
Hello Jim, Thank you for the question. The Surface Burner Knob Kit, PartSelect Number PS2005743 is just the 4 knobs as shown. The Switches, PartSelect Number PS12347302 are sold individually. Please enter the part numbers in on the site for current price and availability. Very sorry but we are website based and only ship parts out. We do not have a store front for pick up. Hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Allen
June 25, 2021
The fan comes on automatically and pops the breaker, she smelled burning under the stove. Can I replace just the fan switch
Thank you Allen
For model number C301
Hi Allen,
Thank you for your question. If the fan is tripping the breaker, check the rocker switch and the blower motor. If smoke was coming from the under the stove, it have have been the motor. If the issue is the switch, it has been discontinued by Whirlpool and you will need to contact them for information on a replacement part. We hope this helps! Good luck with the repair!
Was this helpful?
Thank you for voting!
Related Parts:
Sharon
December 2, 2021
Jen Aire Model JES9860BHA. Knob #WEF4011093 - numbers are confusing. I need new knobs as my knobs (Stainless Steel) are missing all numbers now. If these would work, I want to buy a set.
Thank you -
For model number JES9860BHA
Hello Sharon, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11744450. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
Samuel
January 17, 2023
Knobs broken, will this knob work for mine
For model number CVE4270
Hi Samuel, thank you for asking. This knob is not listed as compatible with your model. The knob, part number PS11743873, fits your model. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
John
August 9, 2023
My cooktop, Jenn-Air Model C-221, Run #07, Mfg. ID # E33658, Serial # 379355UR, has a near square shaft with indents on to of the sides. Will these knobs fit that appliance? I have ordered on line in the past and had to return the items as they did not fit the shafts.
For model number C221
Hi John, thank you for your inquiry. The part that you are referring to will work with your model. We hope this information helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2005743
Manufacturer Part Number: 12200035
Manufacturer Part Number: 12200035
Brand
Model Number
Description