Sump Filter and Cover
$139.97
Special Order
PartSelect Number
PS2370522
Manufacturer Part Number
WD22X10077
Manufactured by
GE
Product Description
Sump Filter and Cover Specifications
This works in conjunction with the pump and filtration system. It is used to filter the drainage for disposal.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not draining | Not cleaning dishes properly | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD22X10077 replaces these:
AP4484685, 1556549, WD08X10076, WD12X10049, WD12X10108, WD22X10028, WD22X10034, WD22X10061, WD22X10074
Customer Repair Stories
Average Repair Rating: 2.5 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Control module went out - causing the heating element to super heat, melting several of the plastic interior parts
I replaced the control module, and effected plastic interior parts - tested wihout heat, then re-tested with heat dry - performed beautifully. This is a pretty expensive unit that would cost around $1500 to replace new. And, Sears wanted $1500 to repair, so I saved a bunch doing it myself for about $350.
Other Parts Used:
-
Mark from Omaha, NE
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
31 of 191 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
February 10, 2018
I am looking for instructions to change out sump pump /filter. Can you help?
For model number PDW7880J03SS
Hello Frank,
Thanks for your question. Unplug the dishwasher and turn off the water supply. Open the door and pull out the lower dishrack. Remove the lower sprayarm by turning it counterclockwise. Then turn the fine filter hub nut counterclockwise and remove it. Take the fine filter by the plastic piece and lift the old filter off. Lift up the tab at the base of the water supply tube and remove it. Turn the hub away and take off the filter cover. Release the locking tabs to remove the filter. Push the new filter into the opening until it locks, then reverse the procedure to put your parts back in the dishwasher.
I hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Joanne
October 19, 2022
In cleaning my dishwasher, I found that the gasket for the filter is starting to disintegrate. How can I order a new one? How necessary is this gasket?
The filter Parts Select No. PS2370522
The filter Manufacturer No. WD22X10077
I cannot find the gasket in the parts list, so I have no number for it.
Thank you.
For model number PDWT180VOOSS
Hi Joanne, thank you for your inquiry. The gasket does not come separately, you may need to replace the entire sump filter and cover assembly, part number PS2370522. This gasket is necessary to retain the cover inlet above the sump filter. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Frank
March 26, 2023
I need gasket that fits under the sump pump filter.
For model number pdwf680r10ss
Hi Frank, thank you for reaching out. The gasket comes with the assembly; it does not come separately. You need to buy the sump filter and cover, part number PS2370522. We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jim
February 17, 2020
Hi, Our dishwasher started leaking from the bottom. So I took it out and laid it on its side. I then started to take it apart looking for obvious problems, when I discovered that the inlet sump had a tear in its side. After removing it there was a round valve in the bottom of it with a flap that had out printed on it. It looks like it belongs to the end of the sump filter going by the shape of it. But I am not sure, plus it doesn't want to stay attached to the sump filter. What do I do now?
For model number GSD6600G00BB
Hello Jim, Thank you for the question. I think you are referring to the Check Valve Flapper, PartSelect Number PS258167. If you search up the part there is a how to video on how to install the part. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2370522
Manufacturer Part Number: WD22X10077
Manufacturer Part Number: WD22X10077
Brand
Model Number
Description