Bearing Slide

Unscrewed the old and screwed in the new. Parts were perfect and were original brand, no knock off stuff. Good deal...

I removed the two screws for the broken slide rail, installed the new slide rail in very short order. Put together the drawer pieces and voila... easy repair

First I removed all the broken pieces with a screwdriver. I then installed the upper drawer slides and then the lower. Put the glass in was easy. All you had to do was put it in the slots on top of the drawers. The filter of course was unscrew the old one and screw on the new one. All in all is was an easy experience. Too bad it took us over a year to order the parts.

So I looked at it, and saw the slide had actually broken. Immediately copied the Model Number and put THAT number into the Google Box. Up popped the Part Select site -- along with others. There was a perfectly understandable schematic (interactive.) I figured out what I needed, and ordered the parts. They arrived, and the fix was simple!!!
No $85 service call
No "We'll be there between 8 and 5"
Simple.

I removed the drawer unscrewed the screws that held in the slider rail. I put the new rail in place of the old one and screwed it in. I replaced the drawer. It took a little longer because I cleaned out the fridge while I was in there. I actually had more parts than I needed, and will be returning a couple of things. It was really easy.

Order the patch and was real easy to install

Used instructions provided by the website. A quick and simple way to do the work!