Part Location Diagram of 285565 Whirlpool Agitator Kit
See part 6 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Agitator Kit

$265.31
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS334557
Manufacturer Part Number 285565
Manufactured by Whirlpool
Product Description

Agitator Kit Specifications

This kit does NOT include the fabric softener dispenser (part 8575076A). That must be ordered separately.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not agitate
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Roper, Maytag, Estate.
Part# 285565 replaces these:
AP3094459, 470786, 285565, 3348117, 3352106, W10110785
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 6 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Top portion of the agitator finally quit working. Cams that engage the action wore down.
Repair was simple, after finding the correct part from Partselect. Exact match. Old part out with removal of one bolt, new agitator assembly installed in five minutes. Works great and saved me from buying a new washer. Cost of repair about $80.00, replace washing machine, about $600.00.
Other Parts Used:
  • Edwin from Plainfield, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
34 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The top part of the Agitator was no longer working.
The repair was very easy. The only hard part was due to the age of the machine the cap covering the agitator assembly was stuck on the top.I had to use a very large pipe wrench to loosen it. Other than that the whole repair went very smooth. You will need an extension with the socket wrench in order to reach the screw holding down the agitator.I was very impressed with the service from Parts Select. I received my part very fast and it included everything I needed to complete the job.
Other Parts Used:
  • Ron from Germantown, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
15 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer's Agitator wasn't working
Basic replacement so easy my nine yr old daughter did the needed repair we watched the video on your web site Way to go Alexis . Ten minutes later all done ! Probably saved a few hundred dollars or more, no service calls or no need to replaced our beloved washer (Cira 1994) they really don't make them like this anymore, will use your company again if needed Thanks !!!
Other Parts Used:
Agitator Bolt
  • David from Barrington, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
13 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plastic teeth on the inside of the large agitator stripped out.
I needed an air impact wrench to remove the single nut. It was stuck on there. Once the Nut. Was removed it was an easy repair. Perfect fit! Just pop it on the shaft and replace the bolt. Since I had my air tools out already I gave it a couple of dugga duggas.
Other Parts Used:
  • David from NICHOLASVILLE, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Wrench set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had to replace the agitator
I already had the old agitator out, so when I got the new one I put it in the tub. You have to spin it a little so it seats properly. I then tightened the bolt with a 7/16” socket and my wife was washing a load within 15 minutes
Other Parts Used:
  • Thomas from MENTOR, OH
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Splines on lower agitator bad, worn.
Had to clean debris on metal drive shaft splines in orderv forvnew lower agiitator to seat properly. Install upper agitator and parts then reinsert bolt in upper agitator. Install cap and o-ring, fabric softner dispenser and test for proper operation.
Other Parts Used:
Agitator Repair Kit
  • Eugene from KENNER, LA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

12 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
August 3, 2018
What is the part number for liquid fabric dispencer? All i see is that part has to be ordered. I need the part number please.
For model number NTW4516FW2
PartSelect logo
Hello Chris, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect #: PS1488027. Hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Tom
August 2, 2021
The bucket of the dog's harness is bought under the agitator of the washer. How do i loosen the agitator to lift it up to remove the harness buckle from under the agitator?
For model number NTW4516FW3
PartSelect logo
Hello Tom, Thank you for your inquiry. You need to start by removing the cap, the cap barrier, and use a socket wrench to remove the bolt from the agitator. You should then be able to pull the agitator out. We have included a link to our video for a similar agitator to assist you with removing the agitator. Hope this helps.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Eric
January 21, 2018
What's all in the agitator kit 285565?
PartSelect logo
Hi Eric, Thank you for your question. The kit includes the bottom base, the agitator dogs, the cap and the agitator mover. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Jamal
November 20, 2018
My washer is not agitating . I replaced the agitator dog & motor drive coupling. Still is not agitating & make noise during the regular wash. Please help
For model number ETW4400WQ0
PartSelect logo
Hi Jamal, thank you for your question. There are a few parts that you will have to check to see if they need to be replaced. You should check your thrust spacer and agitator cam bearing. Both of those parts are in the agitator repair kit. You may also want to take a look at your agitator cams, your gearcase, and then finally your motor itself. I hope that helps. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Chris
August 3, 2018
I just need the fabric softener dispenser not the entire agitator. This is a new washer. Do you have a part number for just the dispenser
PartSelect logo
Hello Chris, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect #: PS1488027. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
December 22, 2019
Good day. Could you please tell me the part number for the softener dispenser accessory for this model washer? Thank you.
For model number ITW4871FW2
PartSelect logo
Hello Robert and thank you for writing. Softener dispenser. This part is discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We do carry related parts for units just like yours. For example, part number PS11749935 Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Leroy
December 15, 2022
The agitate won't turn while washing but the bottom section is turning. Would the agitator kit would be all I should need for this. Washer runs fine does a great job just now the the top agitator won't turn?
For model number LSR8433KQO
PartSelect logo
Hello Leroy, thank you for reaching out. We have researched your model and would recommend checking the following parts to fix your issue: agitator directional cogs, part number PS388034, agitator repair kit, part number PS334650, drive motor coupling, part number PS1485646, and upper agitator, part number PS11741159. Please reach out to customer service if you need help placing an order. Glad to be of help!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Heidi
May 29, 2023
Just wanted to know if this would work for an Amana washer. Serial number C91630105
For model number NTW4516FW3
PartSelect logo
Hello Heidi, Thank you for your inquiry. We confirm that this part will fit your model. We hope this helps.

Was this helpful?
Thank you for voting!
David
May 31, 2023
Looking for ‘dust cover’ part number in agitator assembly. Exploded parts diagram it’s items 2 and 3
For model number 110.25852400
PartSelect logo
Hi David, thank you for contacting us. According to our research, your model does not include a separate agitator cap barrier and seal. These parts come with the fabric softener dispenser, part number PS11746095, that is present on the top of the agitator. We look forward to hearing from you if you need assistance with placing an order through our 7-day-a-week customer service!

Was this helpful?
Thank you for voting!
Related Parts:
Ruby
September 9, 2023
Agitator is real lose and wobblie
For model number Wtw5100v02
PartSelect logo
Hi Ruby, thank you for getting in touch. Based on our understanding of the issue, we would suggest you tighten the bolt at the bottom of the agitator. When the bolt is loose, it causes the agitator to wobble. If this still does not resolve the issue, then we would suggest checking the directional cogs, part number PS388034, to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS334557
Manufacturer Part Number: 285565
Brand
Model Number
Description
Whirlpool
1CLSR7010PQ0
Washer - Residential
Whirlpool
1CLSR7010PQ1
Washer - Residential
Whirlpool
1CLSR7333PQ0
Washer - Residential
Whirlpool
1CLSR7333PQ1
Washer - Residential
Whirlpool
1CLSR9434PQ0
Washer - Residential
Whirlpool
1CLSR9434PQ1
Washer - Residential
Whirlpool
1CLSR9434PT0
Washer - Residential
Whirlpool
1CLSR9434PT1
Washer - Residential
Whirlpool
1CWTW4845EW0
Washer - WASHER
Whirlpool
1CWTW4845EW1
Washer - WASHER
Whirlpool
1CWTW5100VQ0
Washer - Residential
Whirlpool
1CWTW5100VQ1
Washer - Residential, Automatic
Whirlpool
1CWTW5300SQ0
Washer - Residential
Whirlpool
1CWTW5590SQ0
Washer - Residential
Whirlpool
1CWTW5590ST0
Washer - Residential
Whirlpool
1CWTW5590VQ0
Washer - Residential
Whirlpool
1CWTW5590VQ1
Washer - Residential
Whirlpool
1CWTW5790SQ0
Washer - Residential
Whirlpool
1CWTW5790ST0
Washer - Residential
Whirlpool
2DWTW4845EW0
Washer - WASHER
Whirlpool
2DWTW4845EW1
Washer - WASHER
Whirlpool
2LSR5233BN0
Washer - Residential, Automatic
Whirlpool
2LSR5233BQ1
Washer - Residential, Automatic
Whirlpool
2LSR5233BQ2
Washer - Residential, Direct Drive
Whirlpool
2LSR5233BW0
Washer - Residential, Automatic
Whirlpool
2LSR5233BZ1
Washer - Residential, Automatic
Whirlpool
2LSR5233BZ2
Washer - Residential, Direct Drive
Whirlpool
3CAP2762BN0
Washer - Commercial, Automatic
Whirlpool
3CAP2762BW0
Washer - Commercial, Automatic
Whirlpool
3CAP2782BN0
Washer - Commercial
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service