Product Description
Maintenance Kit Specifications
Includes Belt 8066065, Rollers WPW10314173, Pulley 691366, Clip 90296, Tri-ring W10512946.
4 Roller Kit 4392067
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Dryer Maintenance Kit
Troubleshooting
This part fixes the following symptoms:
Noisy | Drum Not Spinning | Marks left on clothes | Heat stays on after drum has stopped
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, Roper, Inglis.
Part# 4392065 replaces these:
AP3131942, 587636, 4392065, 2014, 26000279435, 26000279436, 279435, 279436, 279708, 279708MS, 279709, 279709MS, 279860, 279948, 4392065VP, 691366K3, 80046, 8106, 8237, 8238
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Sarah C - April 4, 2024
Verified Purchase
Perfect fit and a joke to instal
Now the dryer is nice and quiet. Did the work myself, took about an hour. Never had done this before. Gave me the opportunity to clean areas that were getting lint build up. Clothing takes less time to dry properly; we used to have to put on 1.5 to 2 full cycles to dry a load! Now just one or a partial. In retrospect we must have spent a small fortune in hydro drying clothes ??.
Jeremy P - March 28, 2024
Verified Purchase
All the parts I needed for a seamless repair
The kit came with everything needed to refurbishy.dryer, plus I found a $20 bill while I was in there!
Tom N - March 18, 2024
Verified Purchase
Part is ready as a backup
Part arrived quickly and well packaged. It will stay on the shelf until the dryer goes psycho again.
David M - March 15, 2024
Verified Purchase
Parts were all correct and good quality, easy fix.
Parts fitment was perfect and no issues. Order was delivered in a timely manner and kit was complete. Will be using Partselect.ca again in the future for all my appliance repairs!! Great service!!
Mary W - February 14, 2024
Verified Purchase
Parts fit perfectly: Easy Repair
Grateful for how easy it was to find the right parts for my dryer and the enclosed installation instructions with the purchase.Dryer works great again.
Rodney B - January 20, 2024
Verified Purchase
PS373087 - Arrived on time!
Repair video was spot on. 40 minute repair start to finish. Dryer works as new. Must have PartSelect to keep older quality machine running. Newer versions are not as reliable. Thank you guys! Rodney
RONNIE Z - December 9, 2023
Verified Purchase
Good
Parts worked good thank you fast delivery
Ron B - September 7, 2023
Verified Purchase
I'm so glad I found this place for parts
Parts were affordable, easy to install (video was spot on). Ten year old dryer runs like new.
Arthur B - August 31, 2023
Verified Purchase
Fast delivery
Quality parts. I like to stay with oem parts
Jason R - June 10, 2023
Verified Purchase
Easy repair
The part was delivered on time and in great condition. Easy installation and back working like new
- < Prev
- 1
- 2
- 3
- Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 63 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken drive belt
Grow a second set of hands. Always unplug any appliance. Remove lint screen. remove two screws (philips Head). I took a wooden shim lightly tapped w/hammer to pop front of dryer top free. Mine worked on hinges and just flipped back til it rested against the wall. Removed two 5/16 screws inside holding face on carefully raise face section off the support clips at either side on the bottom. Pull drum out (I have the large style drum commercial size [approx.). Clean the inside free of all lint (known to be fire hazard). Sling new belt around drum. Get newly grown set of hands to hold drum in place. Pinch belt to fit between tensioner, lift tensioner and place belt around motor pulley. Spin drum couple times to make certain belt isn't twisted. Reverse dismantle proccess to put back together. Replace all parts that come with kit, you'll feel better knowing you got a new dryer, almost.
Other Parts Used:
-
DENNIS from ALTOONA, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
276 of 303 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat,thumping when running
Removed front panel, drum,replaced belt,tensioner and worn rollers. Then removed rear panel and replaced heating element and high limit thermostat. While I was there completely cleaned inside of dryer. Repair and replacement of parts was quite easy. Just take your time and don't hurry it.
Other Parts Used:
-
Herbert from Holley, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Socket set
88 of 111 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer making extra noise while running
1st Unpluged power.
2nd removed two screws under lint screen cover.
3rd poped up lid with flathead screwdryer, then removed (2) 5/16 screws from door cover and unpluged lid switch, lifted up dryer door pannel
4th removed drum
5th took out plastic triangle wheel rings
6th removed old belt guild (to motor pully)
7th removed old wheels and plastic rings stops
8th cleaned excessive hair dust with shopvac
9th put new replaicment part in dryer. made sure to turn manually to make sure belt was lined up properly, then put all dryer peices back.
10th aditional work, took back cover off and removed the (4) 1/4 screws for lint screen case (left side in dryer) vacumed out any excessive dirt lint ect, also cleaned any excessive dust I found in back of dryer, dryer , exhaust ect, and put all back together.
JUst like a new dryer aain after all PM was complete.
2nd removed two screws under lint screen cover.
3rd poped up lid with flathead screwdryer, then removed (2) 5/16 screws from door cover and unpluged lid switch, lifted up dryer door pannel
4th removed drum
5th took out plastic triangle wheel rings
6th removed old belt guild (to motor pully)
7th removed old wheels and plastic rings stops
8th cleaned excessive hair dust with shopvac
9th put new replaicment part in dryer. made sure to turn manually to make sure belt was lined up properly, then put all dryer peices back.
10th aditional work, took back cover off and removed the (4) 1/4 screws for lint screen case (left side in dryer) vacumed out any excessive dirt lint ect, also cleaned any excessive dust I found in back of dryer, dryer , exhaust ect, and put all back together.
JUst like a new dryer aain after all PM was complete.
Other Parts Used:
-
Michael from Haines City, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
79 of 88 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drum stopped turning on dryer
Great! Spent about $36.00 and I ended up with a overhauled dryer. I ended up cleaning the whole thing out, it's amazing how much stuff accummulates in the frame of a dryer, I also found about $2.00 in change. It's a good idea to clean out a dryer every few years and the broken belt forced me to do it.
But anyway the parts cam very quick and had easy to follow directions.
I would reccomend part select. Matt
But anyway the parts cam very quick and had easy to follow directions.
I would reccomend part select. Matt
Other Parts Used:
-
Matthew from East Islip, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
62 of 73 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer makes a lot of noice, bad rolleres
super fast shipping, got the part in two days, and had it done in 15-20 min, remove the front pannel, remove the belt and tenssioner,took the drum out , took the old rollers , lubed the shafts,replaced the old rollers with the new ones, intalled the drum back, the tenssioner and the new belt, reinstalled the front pannel, and done...easy and fast job, like new dryer, works nice...save some money...the new one will do the same..just dry the clothes.
Other Parts Used:
-
Jesus E from Palm Bay, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
35 of 37 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer stopped tumbling
Pryed the top off the dryer, unplugged the door switch, took the screws out of the front panel, then lifted the drum out. Placed the new belt around the drum and while my wife held it in place and steadied it, I reached underneath and looped the belt through (as per instructions), reassembled and back in business! Reaching under the drum was not that easy....VERY tight space to work in and there was no way I could get both hands through, I almost gave up, but one last try and a couple of good grunts, and it popped into place. Getting the wires back on the door switch was a bit of an ordeal too. Took about 30 mins. but still worth it. I'm sure I saved at least a $100 repair.
Other Parts Used:
-
Clifford from Mastic, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Wrench set
34 of 40 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer Came On & Made Alot Of Noise
Took off the front of & lifted the top up. Pulled the drum out & replaced the two wheels that turn the drum, replaced the belt & replaced the pully wheel that turns the belt & dryer motor & put back together. The dryer now runs like a new one. Has no noise when running.
Other Parts Used:
-
wendy from bush, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
32 of 771 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dyer drum doesnt turn
It was really quite esy remove the screws from the back and pop the top off . then remove 2 top inside screws from the front , lift the front off the sides , support the drum and lift out , you will then see the idler wheels, replace them with the new ones ,replce the tensioner , wrap the belt around the drum, need help putting the drum back in the case, have someone hold the drum in place while you lay on the ground and put the belt around the motor pulley and the tensioner on the bottom.you then put the front panel back into place and secure with the 2 inside screws, then put the rest back together in reverse oder. ... hope this helps someone
Other Parts Used:
-
Shawn from Akron, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
27 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drayer Was Making Squeaking Sound
Took off the top and front panel. Found that the belt tensioner was worn out. Decided to pull drum out,and replace the belt and drum rollers also. Put it back together, and it works fine.
Other Parts Used:
-
Charles from Gray, TN
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
26 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Belt broke, dryer stopped.
Replaced the belt and the wheels supplied with the kit. I also cleaned the inside of the unit. It looks and works like new.
Other Parts Used:
-
Richard from Groveland, MA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
24 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pritam
December 6, 2017
Hi i have squeaking issue with my Kenmore 700 series dryer. Will this kit help me or do i need anything else?
For model number 11067761600
Hi Pritam,
Thank you for your question. Depending on what is causing the squeaking in your appliance it may. If it is your rollers, belt, or your pulley causing the squeaking then this would definitely help with that. I hope that helps. Good luck with your repair.
26 people found this helpful.
Was this helpful?
Thank you for voting!
Elsa
July 20, 2017
My dryer is super noisy and the drum seems to be lacking stability and I’m looking to completely overhaul it. Is this the kit I would need to do that?
Hi Elsa, this dryer repair kit 4392065 will work with your model. The belt will be just shy of 0.25 inches shorter than your belt, and will have 4 instead of 5 grooves. We suggest using turbine oil on the rollers, shafts, and idler pulley (just a few drops). This will help situate the parts, and should give them a longer life span. Best of luck with this repair.
17 people found this helpful.
Was this helpful?
Thank you for voting!
Basem
July 20, 2017
Will this stop the screeching noises
Hello Basem, this dryer maintenance kit 4392065 includes everything you need to get rid of the squeaking noise. Please let us know if you have any further questions.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Kirk
October 31, 2017
Does this kit work with my model dryer? The belt with this kit seems to be the same, but the rollers shown on this page show a different part number than the roller kit that comes up when I search for my particular model #. Also, the noise that I hear is a screeching that seems to be coming from the rear of the dryer. When I spin the drum counterclockwise manually, I can hear the noise. A google search comes up with the suggestion to replace drum bearings when hearing noises in the rear. Is there a drum bearing part for this model?
For model number PYE2300AYW
Hi Kirk, Thank you for the question. This kit will not work on your model number sorry. You will need to order the Multi Rib Belt - 92-1/4", Part Number: PS346995 and the Rear Drum Support Roller Kit, Part Number: PS2162268. Your model dose not have the drum that requires a bearing.Your drum rides on the lip at the back of the appliance, on the lip there is a felt seal that prevents the noise you are hearing. I suggest replacing the Drum Felt Seal, Part Number: PS11740735. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Roger
December 7, 2017
Dryer making a squeaky sound
For model number MAYTAG MDE9206AYW
Hi Roger,
Thank you for your question. If your dryer is making a squeaking sound, there are some parts that you will need to check to see which one is causing the issue. You will need to check the drum support rollers, the roller shaft, the front glides, the idler pulley wheel and bearing and the belt. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Heather
August 14, 2017
The power on my dryer comes on but it will not run. Will this fix the problem?
For model number WED6400SW1
Hi Heather,
Thank you for your inquiry. I would actually suggest checked your door switch and your thermistor to see if either of those parts are malfunctioning. If anything in the maintenance kit was not working, you would either hear it squeaking or have a burning rubber smell. You can test your door switch and your thermistor with a multi-meter to see if either of those parts are not working. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Sara
July 20, 2017
I know depending on the model dryer they have different number of rollers. This kit only has 2 rollers do I need to buy extra or does it come with everything I need?
Hi Sara, this repair kit will work for your model and you do not need to purchase extra rollers, it comes with enough. The video above should give you a brief overview of how to install the parts, however they may look slightly different for your model. I hope this helps.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Beth
December 7, 2018
My dryer makes a thumping sound while it’s running, will this kit help fix thie problem? Thank you
For model number WED7000DW1
Hello Beth, thank you for your question. Yes, this kit is manufactured for that appliance and would help fix that problem. The belt, rollers and idler pulley are the first parts we recommend replacing when this issue arises. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Scott
December 5, 2017
When we start the dryer, it makes a pretty loud squealing, that seems to go away after about 30-ish seconds. I'm assuming this kit should fix my issue?Thanks for your help
For model number MED6400TB0
Hello Scott, Thank you for your inquiry. Yes, we show that this kit contains the most common parts that would fix that issue. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
John
September 7, 2021
I'm looking for the correct belt/roller maintenance kit. After entering my model number on the Whirlpool website for the kit, it returned item number 587636. I copied that information to search for the kit, landing me on your site. However, after reading some questions, the kit may not be compatible. My drum requires a 92 1/4", has 4 ribs, and is marked made in usa, 8066065, fsp, cpt 1a. Will you please provide me with the correct maintenance kit i need to make the repairs.Kindest regards,
john g.
For model number Whirlpool LGR8620PW0
Hello John, thank you for your question. We have researched the model you have provided, and the part number PS373087 is the correct part for your unit. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS373087
Manufacturer Part Number: 4392065
Manufacturer Part Number: 4392065
Brand
Model Number
Description