Hanging Basket Rail - Left Side

removed drawer in frig then I removed broken shelf replaced with new one no tools needed replaced drawer.
For freezer I had to remove baskets then the screws holding the tracks replaced tracks and put new tracks back ,put baskets back.

Removed parts and reused the old rollers from the sliding meat drawer. Important point to remember is to not through away any hardware before the new parts arrive. New parts are void of hardware. Parts arrvied ontime as promissed and fit perfectly. I saved a ton of money doing this myself and not calling the repairman. great experiance.

First I removed the broken rails (2 screws apiece with a nut driver), second I confirmed the part numbers, third I ordered new parts (which arrived amazingly fast) and fourth I installed new parts using the existing screws.

Removed basket to access rail...used nut driver to remove screws from exisiting rail (BE SURE TO SAVE!!!!) Lined up new rail and replaced screws.......replaced basket....SUPER SIMPLE!!!!!!

When I ordered the parts there was a video for each part. I saw all 3 videos which were most helpful. We had struggled with these drawers for years. Since our refrigerator was over 20 years old I was afraid that replacement parts would no longer be available. To my surprise they are still available. Now I wish I would have looked for the replacement parts sooner.
The only tools I used were a nut driver and a putty knife. Just like the video showed! A big THANKS for the videos!

Followed instructions in the video on the web site and found that they were very complete and made the repair a lot easier than I would've imagined.