Part Location Diagram of 3204267 Frigidaire High Limit Thermostat
See part 33 in the diagram
Replacing your Frigidaire Dryer High Limit Thermostat
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

High Limit Thermostat

★★★★★
★★★★★
2 Reviews
$119.16
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS446428
Manufacturer Part Number 3204267
Manufactured by Frigidaire
Product Description

High Limit Thermostat Specifications

This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when the temperature drops by 70 degrees Fahrenheit.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Dryer High Limit Thermostat

Replacing your Frigidaire Dryer High Limit Thermostat
Troubleshooting
This part fixes the following symptoms:
Too hot
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Electrolux, Gibson.
Part# 3204267 replaces these:
AP2131477, 508516, 73204267
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 7 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
dryer does not get very hot, takes two cycle's to dry
removed the screws, disconnected the wires. installed the new elements replaced the wires.
Other Parts Used:
Thermal Limiter - Limit 220
  • MELISSA from OKEECHOBEE, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
87 of 153 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had a professional do the install. He had difficulty aligning the cabinet so that it did not rub against the dryer drum. The parts you mailed me worked fine and resolved the problem. Thanks. Even having to pay the installer saved me 50% on the total job.
Installer unscrewed the screws on the upper panel, loosened the pulley holding the rubber drum cable, and pulled the drum up and out of the unit. With the rear heating element exposed, he unplugged the wire connections to the heating element, unscrewed the four screws holding the element to the rear panel and took the element out. Then he installed the new heating element by re-applying the four screws into the rear panel. He then replaced the thermal limiter which was directly at the right of the heating element by unplugging the wire connections to the thermal limiter and then unscrewing the thermal limiter from the rear panel. The process to install the new thermal limiter was the reverse process. He didn't install a new High Limit Thermostat because there was one attached to the new Heater. When all the new parts were installed, he reinstalled the drum by pushing the rear nub of the drum into the whole at the center of the heating plate. He then placed the rubber drum cable around the drum with the rough service facing the drum, placed the cable on the pulley and adjusted the tension of the cable with a screw driver. He then reinstalled the front panel by aligned the screw holes and reinserting and tightening the screws.
Other Parts Used:
Heater Assembly Thermal Limiter - Limit 220
  • michael from jupiter, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
47 of 61 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cloths not drying
Removed the back panel and the exhaust hose.removed the heater element and changed the thermostat wire was melted cut damaged part of wire soldered and rapped with black electrical tap
Other Parts Used:
  • keith from ELLENVILLE, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers, Socket set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced burned out heating element
Not having the repair manual made the repair more difficult. Prior experience made the job somewhat easy. Had to study every move to make sure no parts were not broken but overall the repair went without any problems. I found out that the bearing plate was removable to facilitate removal and replacement of the heating element. Advise if you are doing a repair of an appliance you don't know much about, take your time and everything should go well for you.
Other Parts Used:
Heater Assembly
  • George from ALLENTOWN, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lack of heat
Remove top lid by pushing tab on either side with a putty knife. Disconnect the 2 wire carriages on right. Remove one
phillips head screw on each side that holds front panel to dryer body. Remove front panel by using flat head screwdriver to pry panel from body. Remove thermostat located on bottom right attached to front of motor on a plastic body by removing two phillips head screws. Disconnect wires and place on new part.
Other Parts Used:
  • Ann from WALLA WALLA, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The thermostat had deteriorated and no heat
Had to loosen drum and move it forward to get at switch. Didn’t have to remove belt.
Other Parts Used:
  • David from ROUND TOP, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer stopped in middle of cycle and would not restart
followed the repair video and replaced thermal fuse and thermostat(recommend replacing both due to the problem could of resulted in either part being the cause),Repair went relatively easy.I also recommend to clean and vacuum the dryer while you have it all apart due to a lot of lint buildup and don't forget to unplug before servicing!Stay Safe!!!
Other Parts Used:
  • MICHAEL from HUDSON, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

26 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
R0NNIE
August 25, 2017
How do i know its the thermastat
For model number FAQE7077KR0
PartSelect logo
Hi Ronnie, Thank you for your question. To verify if the thermostat or any other electrical part in your appliance is causing an issue you may use a multimeter to check the continuity of each part. I hope this helps. Thank you and have a great day!

14 people found this helpful.

Was this helpful?
Thank you for voting!
Debra
May 21, 2019
When drying my clothes the dryer shuts off in the middle of the cycle. When this happens the clothes are not dry and there are lights flashing in the digital window.
For model number 41788022000
PartSelect logo
Hello Debra, thank you for your question. First we would recommend opening up the unit and cleaning it out well. It sounds like it might be getting too hot and shutting down. Vacuum out around the blower, motor, vent and drum. Unplug the unit and leave it while you clean it then plug it in to see if that fixes the issue. If it doesn't, you will want to test a few parts to determine which is the issue. They are High Limit Thermostat Part Number: 3204267, Control Thermistor Part Number: 134587700 and LIMITER Part Number: 137032600. I hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Tom
October 24, 2017
The dryer is spinning but there is no heat, what could be the problem, thanks
For model number GLEH1642DS1
PartSelect logo
Hi Tom, Thank you for your question. There are a couple of parts that you will want to check. You will want to check all of your thermostats, your thermal fuse, your heating element, and your door switch. You can test all of those parts with a multi meter to see which ones are working. I hope that helps. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Latricia
February 17, 2018
Hi i have purchased all sensors/fuses cause of not heating. At this point i've also purchased 3 high limit thermostat sensors and all 3 have blown. Please tell me what's causing this and how to fix it!?
For model number CDE4700LW0
PartSelect logo
Hello Latricia, Thank you for your inquiry. The thermal fuse blows if the dryer overheats and can also cause the high limit thermostat to blow as well and the dryer will no longer heat. It can also be caused by a power surge, or an issue with the heating element. I would test the heating element with a multimeter to see if it has continuity, then check the wiring and the power cord. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Jackie
December 10, 2017
The dryer starts and then the pause button comes on and the dryer stops
For model number FFQE5000QW1
PartSelect logo
Hi Jackie, Thank you for the question. I suggest first cleaning the lint filter and the duct the filter fits down into. Also it is a good idea to remove the front panel to access inside and vacuum it out.If everything is clear and it still goes to pause, you may need to replace the main control board, PartSelect Number PS3490387. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Jeanne
January 6, 2018
My dryer melts my clothes..ruins anything soft fuzzy clothes and we have black marks on the clothes.. told to clean filter..done..scrape back vent thing that's burnt..done..turn temp down which i should have to but done...still doing it. any suggestions?
For model number EIGD55HIW0
PartSelect logo
Hello Jeanne, Thank you for your inquiry. I would check the high limit thermostat, the felt seals, the thermal limiter next to the high limit thermostat, and the thermal fuse on the motor. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Michelle
January 15, 2018
Change thermostat and heating coil for heat and still not getting hot is there anything else I should do?
For model number FEQ332ES0
PartSelect logo
Hi Michelle, Thank you for the question. I suggest testing the Thermal Limiter, PartSelect Number PS419402, The High Limit Thermostat, PartSelect Number PS446428 and the Thermostat - 4 Terminal, PartSelect Number PS419278 with a multi meter to check for continuity to determine if they are defective. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Greg
April 27, 2023
Electric dryer will now & then just shut off on its own after running 10-12 seconds. I pulled off the vent hose, it's clean inside, the dryer port to the hose is clean, and it's clean up the wall as far as my elbow. I left the hose off, tried again, and it ran fine. Put the hose on mid-cycle and it stopped running. Turned it off, let it sit a few minutes, put vent hose back on at both ends (dryer and wall outlet) and...runs fine and will run till the timer is up. This whole fools errand has happened 2x now, but we had 10 normal drying cycles between the two times with no issues whatsoever. I initially thought: blown thermal fuse, but the air is hot, the clothes are dry (after the entire song & dance) and it will pause, stop, and run fine, of course AFTER I take the hose off, put it back on, etc. Plus...if the thermal fuse was bad then...it would never suddenly "fix" itself after taking the hose off...electrical fuses are either good and working or..not. No in-between, as far I I know. Love to hear your thoughts.
For model number EFDE317TIW2
PartSelect logo
Hi Greg, thank you for reaching out. According to our research, it seems like an overheating issue. Over time, the air vents get clogged with lint or dirt which traps the hot air inside the dryer unit. Stopping and removing the vent hose might gives time for the dryer to cool down, causing it to start once again till it heats up again. We would suggest checking the high-limit thermostat, part number PS446428, for continuity using a multimeter. A faulty thermostat might not be reading the temperature accurately, causing the dryer to stop mid-cycle. We hope this information helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Pierre-Luc
January 3, 2020
Hi, my dryer is not heating at high and sanitize levels. It works fine at normal and low. Does it sound more like a heating element issue or thermostat? Thanks!
For model number CAQE7021LW0
PartSelect logo
Good Day Pierre-Luc. Thank you for your question in regards to your unit Model Number CAQE7021LW0. Based on our research, we would recommend replacing the High Limit Thermostat PartSelect Number PS446428. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ethan
February 4, 2022
I had a door open error, even when closed. I replaced the Thermal Limiter, which solved that issue. After install, the dryer is getting very hot, even at low heat. The continuity of the thermal limiter as well as the high limit thermostat and thermal fuse on the heating element housing, which all checked out fine. Any thoughts? Thanks!
For model number FFSE5115PW2
PartSelect logo
Hello Ethan, Thank you for your inquiry. First check the door catch and strike to make sure they are not damaged or broken, and test the door switch with a multimeter. There are two thermal fuses in this model, one on the heating element (where the high limit thermostat is) and the other on the blower tube, plus the control thermistor, which is also on the blower tube. Also test the heating element itself. If you have tested all of these parts, you may have a wiring issue or an issue with the main control board, which gets the message from the door switch if the door is opened or closed. Check the wiring and the board for any visible damage. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS446428
Manufacturer Part Number: 3204267
Brand
Model Number
Description
Frigidaire
41749012890
Dryer - Residential, Electric
Frigidaire
41749022890
Dryer - Residential, Electric
Kenmore
41761712510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761712511
Washer Dryer Combo - Kenmore 41761712511 Laundry Center
Kenmore
41761722510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761722511
Washer Dryer Combo - Laundry Center
Kenmore
41761723510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761723511
Washer Dryer Combo - Laundry Center
Kenmore
41761732810
Washer Dryer Combo - Laundry Center
Kenmore
41761732811
Washer Dryer Combo - Laundry Center
Kenmore
41761733810
Washer Dryer Combo - Laundry Center
Kenmore
41761733811
Washer Dryer Combo - Kenmore 41761733811 Laundry Center Combo
Kenmore
41764182300
Dryer
Kenmore
41769042990
Dryer
Kenmore
41769042991
Dryer
Kenmore
41769052990
Dryer
Kenmore
41769052991
Dryer
Kenmore
41780032990
Dryer
Kenmore
41780042990
Dryer
Kenmore
41780042991
Dryer
Kenmore
4178005291
Dryer - Kenmore Dryer Model 417.8005291 (4178005291, 417 8005291) Parts
Kenmore
41780052990
Dryer
Kenmore
41780052991
Dryer
Kenmore
41780142000
Dryer
Kenmore
41780412700
Dryer
Kenmore
41781042000
Dryer
Kenmore
41781042001
Dryer
Kenmore
41781052000
Dryer
Kenmore
41781052001
Dryer
Kenmore
41781100000
Dryer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service