Dispenser Door Pin
$15.57
Special Order
PartSelect Number
PS11739225
Manufacturer Part Number
WP2196195
Manufactured by
Whirlpool
Product Description
Dispenser Door Pin Specifications
This dispenser door pin comes with the washer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Leaking
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Maytag.
Part# WP2196195 replaces these:
2180210, 2196195, 3406121
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Front Door Ice Wouldn't Work And Air Going Into Freezer
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks
Other Parts Used:
-
BILL from BATESVILLE, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
493 of 598 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice make would not dispense out the front door.
Unpluged the unit and removed the front trim ring.
removed the old parts and installed the new parts.
in reverse order. it took about 12 hour but the dispenser to work but seems to work fine now.
removed the old parts and installed the new parts.
in reverse order. it took about 12 hour but the dispenser to work but seems to work fine now.
Other Parts Used:
-
Hoyt A Sulvin Sr from Irwindale, CA
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
20 of 57 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
jad to fix the mount fire the pin and install a new pin and spring
I started by using some superglue to reattach the broken mounting ring for the pin above the ice door flap. Wait a few minutes for the glue to set (I waited about 2 hours.) After that, install the pin and spring with the spring legs facing the door flap mount and the arch on top. Angle it so the freezer door apply pressure to the spring arch then slot the pin into the circular mount you just glued on the left and the retaining slot on the right.
Other Parts Used:
-
Zachery from CANTON, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739225
Manufacturer Part Number: WP2196195
Manufacturer Part Number: WP2196195
Brand
Model Number
Description