Part Location Diagram of WP71003558 Whirlpool Motor Isolator
See part 6 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Motor Isolator

★★★★★
★★★★★
1 Review
$10.38
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11743903
Manufacturer Part Number WP71003558
Manufactured by Whirlpool
Product Description

Motor Isolator Specifications

This motor isolator is less than an inch long.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Cooktop, Range, Wall Oven.
This part works with the following products:
Jenn-Air, Kenmore, Maytag, Hoover.
Part# WP71003558 replaces these:
4381697, 5-70060, 570060, 7-8926, 708926, 71003558, 8038P002-60, Y708926
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 2.4 / 5.0, 5 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Blower motor died and I needed to replace it
Most of the repair was obvious as I took the blower apart before ordering the parts. Unfortunately the new motor was significantly larger than the original motor so I had to um. Adjust the position of some of the other parts to fit it in. There was a sheet metal flange that was installed on the other side of the blower from the motor which was designed to focus the air flow into the blower. I used a hammer to ajust the angle of flange so it no longer extended as far into the blower housing.

It works just fine although its a bit louder than the old motor was.
Other Parts Used:
Hose Clamp Grease Filter Urethan Foam Gasket Blower Motor Kit
  • John from Berkley, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
377 of 384 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
high blower vibration
blower wheel was caked with dried grease clumps; replaced blower wheel, urethan foam and 3 motor isolators; blower/fan no longer vibrating cooktop.
Other Parts Used:
Exhaust Vent Blower Wheel Urethan Foam Gasket
  • Lawrence from Chandler, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
9 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Downdraft Motor Bearings Shot
I first had to purchase the replacement motor which was quoted from a high of $236 to a low at graingers of$100. 00. The counterman at graingers removed the blower fan from the motor for me with a special long handled allen key. I then degreased and cleaned the blower fan. I had to cut off the screws on the motor and replace the 3 motor isolators and the urethane foam around the motor. I had to thread the 3 wires from the new motor through the bx cable from the old motor and reattach the fan to the motor. Anyone wanting more detailed informatioin may contact me at:mablume@optonline. Net
Other Parts Used:
Grease Filter Urethan Foam Gasket
  • MICHAEL from LAKE GROVE, NY
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Downdraft blower motor noise, fluctuating fan speed and binding. Also replaced indicator light for burner knob.
1. Turned off electrical breaker at electrical service panel.
2. Tested stove top to verify correct breaker was off as well as cook top.
3. Removed front electrical connection panel @ cook top.
4. Disconnected wires to blower fan. (Before disconnection I color coded wires for correct reconnection)
5. Removed the bracket holding the armored cable (protecting motor wires) and removed wires (where connects to electrical connection box).
6. Removed 4 nuts @ blower motor housing and removed blower motor housing and fan.
7. Removed 3 screws that attached the blower fan to the blower motor housing noting or marking the position of the housing to the motor bracket in order to have the same placement position.
8. Pulled the 3 connecting wires from the armored cable protector to separate housing from motor.
9. Removed the fan assembly from the blower motor shaft by using an allen wrench carefully noting the distance from motor face to the fan.
10. Noting/marking the position of the motor mounting bracket connections unscrew the nut and screw that secures the bracket to the motor.
11. Reassemble in reverse order.
Note:
I taped the motor wires tightly together every 3 or so inches to be able to slide through the armored cable.
I also had to rotate the mounting bracket a little to be able to perfectly match the motor housing to the motor bracket.

The new fan motor works great but it's a little bit louder.
Other Parts Used:
Indicator Light Kit
  • John from FRESNO, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set, Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
blower motor was making loud noise
removed motor, saw that stablizers were broke and went to a local parts supply shop called SUNDBERG and was given a price of about 49.00 for three stablizers. at that point i went to the internet and found PARTSELECT.COM were i found the same parts for a fraction of the price,17.00, i could not believe it! SUNDBERG customer service was horrible.PARTSELECT custormer service is great and was just over the internet,any how the repair is done no more loud noise and wife is happy again ,for awhile.thanks keep up the good work.i tell everybody about you guys.
Other Parts Used:
  • alphonso from plainfield, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wynn
January 26, 2024
The exhaust fan recently started making some loud screeching noises. I thought maybe the fan blades of the blower wheel might be hitting the edges of the metal frame. However, the wheel spins freely by hand and no noises from the motor like it's having any problems. The noise only occurs upon turning the power on for the fan to reach high speed. I was reading some things here saying people had problems with the motor isolater. Would a broken one cause this kind of noise? Or do you have another suggestion? Any help would be appreciated. This is an older unit and the SN# tag is behind the blower exhaust body. All I could read in the upper right corner was 39 (printed) then 22162 (stamped in the tag).
For model number C301
PartSelect logo
Hello Wynn, thank you for your inquiry. Based on the description that you have provided, the issue is most probably with the motor isolator, part number PS11743903. It reduces motor vibration noises. We would recommend replacing it to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743903
Manufacturer Part Number: WP71003558
Brand
Model Number
Description
Jenn-Air
12103
Cooktop - Gas
Jenn-Air
12104
Cooktop - Electric
Kenmore
12301
Range - Kenmore Range/Stove/Oven Model 123.01 (12301, 123 01) Parts
Kenmore
12302
Range - Kenmore Range/Stove/Oven Model 12302(1988) Parts
Kenmore
20133
Range - Kenmore Range/Stove/Oven Model 20133(1988) Parts
Jenn-Air
20135
Range
Kenmore
20234
Range - Kenmore Range/Stove/Oven Model 20234(1988) Parts
Jenn-Air
20236
Range
Jenn-Air
20237
Range
Jenn-Air
20239
Range
Jenn-Air
22001
Cooktop - Electric
Jenn-Air
22112
Cooktop - Electric
Jenn-Air
22113
Cooktop - Electric
Jenn-Air
22116
Cooktop - Electric
Kenmore
22302
Range - Kenmore Range/Stove/Oven Model 22302(1988) Parts
Kenmore
22303
Range - Kenmore Range/Stove/Oven Model 22303(1988) Parts
Kenmore
22304
Range - Kenmore Range/Stove/Oven Model 22304(1988) Parts
Jenn-Air
22305
Cooktop - Electric
Kenmore
22306
Range - Kenmore Range/Stove/Oven Model 22306(1988) Parts
Kenmore
22307
Range - Kenmore Range/Stove/Oven Model 22307(1988) Parts
Kenmore
22308
Range - Kenmore Range/Stove/Oven Model 22308(1988) Parts
Kenmore
22309
Range - Kenmore Range/Stove/Oven Model 22309(1988) Parts
Kenmore
22310
Range - Kenmore Range/Stove/Oven Model 22310(1988) Parts
Jenn-Air
22401
Cooktop - Electric
Hoover
2300
Cooktop
Jenn-Air
2300ERS
Cooktop - Electric
Jenn-Air
2320ERS
Cooktop - Electric
Jenn-Air
2325ERS
Cooktop - Electric
Jenn-Air
2350EGS
Cooktop
Hoover
2360
Cooktop
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service